Commit 136a713d authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'arm-soc/for-3.19/brcmstb-drivers' of https://github.com/brcm/linux into next/drivers

This pull request contains the following changes to the Broadcom GISB bus
arbiter from Kevin Cernekee:

- Extend brcmstb GISB bus driver to work on MIPS (currently ARM-only) and support
  65nm and 40nm MIPS-based chips such as: BCM7038, BCM7400 and BCM7435

* tag 'arm-soc/for-3.19/brcmstb-drivers' of https://github.com/brcm/linux:
  bus: brcmstb_gisb: Add register offset tables for older chips
  bus: brcmstb_gisb: Look up register offsets in a table
  bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses
  bus: brcmstb_gisb: Make the driver buildable on MIPS

Conflicts:
	drivers/bus/brcmstb_gisb.c
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 0cef9ab5 d1d67868
......@@ -2,7 +2,11 @@ Broadcom GISB bus Arbiter controller
Required properties:
- compatible: should be "brcm,gisb-arb"
- compatible:
"brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for 28nm chips
"brcm,bcm7435-gisb-arb" for newer 40nm chips
"brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
"brcm,bcm7038-gisb-arb" for 130nm chips
- reg: specifies the base physical address and size of the registers
- interrupt-parent: specifies the phandle to the parent interrupt controller
this arbiter gets interrupt line from
......
......@@ -6,7 +6,7 @@ menu "Bus devices"
config BRCMSTB_GISB_ARB
bool "Broadcom STB GISB bus arbiter"
depends on ARM
depends on ARM || MIPS
help
Driver for the Broadcom Set Top Box System-on-a-chip internal bus
arbiter. This driver provides timeout and target abort error handling
......
......@@ -24,26 +24,72 @@
#include <linux/of.h>
#include <linux/bitops.h>
#ifdef CONFIG_ARM
#include <asm/bug.h>
#include <asm/signal.h>
#endif
#define ARB_TIMER 0x008
#define ARB_ERR_CAP_CLR 0x7e4
#define ARB_ERR_CAP_CLEAR (1 << 0)
#define ARB_ERR_CAP_HI_ADDR 0x7e8
#define ARB_ERR_CAP_ADDR 0x7ec
#define ARB_ERR_CAP_DATA 0x7f0
#define ARB_ERR_CAP_STATUS 0x7f4
#define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12)
#define ARB_ERR_CAP_STATUS_TEA (1 << 11)
#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2)
#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c
#define ARB_ERR_CAP_STATUS_WRITE (1 << 1)
#define ARB_ERR_CAP_STATUS_VALID (1 << 0)
#define ARB_ERR_CAP_MASTER 0x7f8
enum {
ARB_TIMER,
ARB_ERR_CAP_CLR,
ARB_ERR_CAP_HI_ADDR,
ARB_ERR_CAP_ADDR,
ARB_ERR_CAP_DATA,
ARB_ERR_CAP_STATUS,
ARB_ERR_CAP_MASTER,
};
static const int gisb_offsets_bcm7038[] = {
[ARB_TIMER] = 0x00c,
[ARB_ERR_CAP_CLR] = 0x0c4,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0c8,
[ARB_ERR_CAP_DATA] = 0x0cc,
[ARB_ERR_CAP_STATUS] = 0x0d0,
[ARB_ERR_CAP_MASTER] = -1,
};
static const int gisb_offsets_bcm7400[] = {
[ARB_TIMER] = 0x00c,
[ARB_ERR_CAP_CLR] = 0x0c8,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x0cc,
[ARB_ERR_CAP_DATA] = 0x0d0,
[ARB_ERR_CAP_STATUS] = 0x0d4,
[ARB_ERR_CAP_MASTER] = 0x0d8,
};
static const int gisb_offsets_bcm7435[] = {
[ARB_TIMER] = 0x00c,
[ARB_ERR_CAP_CLR] = 0x168,
[ARB_ERR_CAP_HI_ADDR] = -1,
[ARB_ERR_CAP_ADDR] = 0x16c,
[ARB_ERR_CAP_DATA] = 0x170,
[ARB_ERR_CAP_STATUS] = 0x174,
[ARB_ERR_CAP_MASTER] = 0x178,
};
static const int gisb_offsets_bcm7445[] = {
[ARB_TIMER] = 0x008,
[ARB_ERR_CAP_CLR] = 0x7e4,
[ARB_ERR_CAP_HI_ADDR] = 0x7e8,
[ARB_ERR_CAP_ADDR] = 0x7ec,
[ARB_ERR_CAP_DATA] = 0x7f0,
[ARB_ERR_CAP_STATUS] = 0x7f4,
[ARB_ERR_CAP_MASTER] = 0x7f8,
};
struct brcmstb_gisb_arb_device {
void __iomem *base;
const int *gisb_offsets;
struct mutex lock;
struct list_head next;
u32 valid_mask;
......@@ -52,6 +98,26 @@ struct brcmstb_gisb_arb_device {
static LIST_HEAD(brcmstb_gisb_arb_device_list);
static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
{
int offset = gdev->gisb_offsets[reg];
/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
if (offset == -1)
return 1;
return ioread32(gdev->base + offset);
}
static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
{
int offset = gdev->gisb_offsets[reg];
if (offset == -1)
return;
iowrite32(val, gdev->base + reg);
}
static ssize_t gisb_arb_get_timeout(struct device *dev,
struct device_attribute *attr,
char *buf)
......@@ -61,7 +127,7 @@ static ssize_t gisb_arb_get_timeout(struct device *dev,
u32 timeout;
mutex_lock(&gdev->lock);
timeout = ioread32(gdev->base + ARB_TIMER);
timeout = gisb_read(gdev, ARB_TIMER);
mutex_unlock(&gdev->lock);
return sprintf(buf, "%d", timeout);
......@@ -83,7 +149,7 @@ static ssize_t gisb_arb_set_timeout(struct device *dev,
return -EINVAL;
mutex_lock(&gdev->lock);
iowrite32(val, gdev->base + ARB_TIMER);
gisb_write(gdev, val, ARB_TIMER);
mutex_unlock(&gdev->lock);
return count;
......@@ -110,18 +176,18 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
const char *m_name;
char m_fmt[11];
cap_status = ioread32(gdev->base + ARB_ERR_CAP_STATUS);
cap_status = gisb_read(gdev, ARB_ERR_CAP_STATUS);
/* Invalid captured address, bail out */
if (!(cap_status & ARB_ERR_CAP_STATUS_VALID))
return 1;
/* Read the address and master */
arb_addr = ioread32(gdev->base + ARB_ERR_CAP_ADDR) & 0xffffffff;
arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff;
#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
arb_addr |= (u64)ioread32(gdev->base + ARB_ERR_CAP_HI_ADDR) << 32;
arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
#endif
master = ioread32(gdev->base + ARB_ERR_CAP_MASTER);
master = gisb_read(gdev, ARB_ERR_CAP_MASTER);
m_name = brcmstb_gisb_master_to_str(gdev, master);
if (!m_name) {
......@@ -136,11 +202,12 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
m_name);
/* clear the GISB error */
iowrite32(ARB_ERR_CAP_CLEAR, gdev->base + ARB_ERR_CAP_CLR);
gisb_write(gdev, ARB_ERR_CAP_CLEAR, ARB_ERR_CAP_CLR);
return 0;
}
#ifdef CONFIG_ARM
static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
......@@ -165,6 +232,7 @@ void __init brcmstb_hook_fault_code(void)
hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
"imprecise external abort");
}
#endif
static irqreturn_t brcmstb_gisb_timeout_handler(int irq, void *dev_id)
{
......@@ -192,10 +260,20 @@ static struct attribute_group gisb_arb_sysfs_attr_group = {
.attrs = gisb_arb_sysfs_attrs,
};
static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
{ .compatible = "brcm,gisb-arb", .data = gisb_offsets_bcm7445 },
{ .compatible = "brcm,bcm7445-gisb-arb", .data = gisb_offsets_bcm7445 },
{ .compatible = "brcm,bcm7435-gisb-arb", .data = gisb_offsets_bcm7435 },
{ .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
{ .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
{ },
};
static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
{
struct device_node *dn = pdev->dev.of_node;
struct brcmstb_gisb_arb_device *gdev;
const struct of_device_id *of_id;
struct resource *r;
int err, timeout_irq, tea_irq;
unsigned int num_masters, j = 0;
......@@ -216,6 +294,13 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
if (IS_ERR(gdev->base))
return PTR_ERR(gdev->base);
of_id = of_match_node(brcmstb_gisb_arb_of_match, dn);
if (!of_id) {
pr_err("failed to look up compatible string\n");
return -EINVAL;
}
gdev->gisb_offsets = of_id->data;
err = devm_request_irq(&pdev->dev, timeout_irq,
brcmstb_gisb_timeout_handler, 0, pdev->name,
gdev);
......@@ -267,11 +352,6 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
return 0;
}
static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
{ .compatible = "brcm,gisb-arb" },
{ },
};
static struct platform_driver brcmstb_gisb_arb_driver = {
.driver = {
.name = "brcm-gisb-arb",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment