media: vb2: add V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF

This patch adds support for the V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF
flag.

It also adds a new V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF
capability.

Drivers should set vb2_queue->subsystem_flags to
VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF to indicate support
for this flag.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Documentation/media/uapi/v4l/buffer.rst

@@ -607,6 +607,19 @@ Buffer Flags
 	applications shall use this flag for output buffers if the data in
 	this buffer has not been created by the CPU but by some
 	DMA-capable unit, in which case caches have not been used.
+    * .. _`V4L2-BUF-FLAG-M2M-HOLD-CAPTURE-BUF`:
+
+      - ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF``
+      - 0x00000200
+      - Only valid if ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` is
+	set. It is typically used with stateless decoders where multiple
+	output buffers each decode to a slice of the decoded frame.
+	Applications can set this flag when queueing the output buffer
+	to prevent the driver from dequeueing the capture buffer after
+	the output buffer has been decoded (i.e. the capture buffer is
+	'held'). If the timestamp of this output buffer differs from that
+	of the previous output buffer, then that indicates the start of a
+	new frame and the previously held capture buffer is dequeued.
     * .. _`V4L2-BUF-FLAG-LAST`:
 
       - ``V4L2_BUF_FLAG_LAST``

Documentation/media/uapi/v4l/vidioc-reqbufs.rst

@@ -125,6 +125,7 @@ aborting or finishing any DMA in progress, an implicit
 .. _V4L2-BUF-CAP-SUPPORTS-DMABUF:
 .. _V4L2-BUF-CAP-SUPPORTS-REQUESTS:
 .. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS:
+.. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF:
 
 .. cssclass:: longtable
 
@@ -150,6 +151,11 @@ aborting or finishing any DMA in progress, an implicit
       - The kernel allows calling :ref:`VIDIOC_REQBUFS` while buffers are still
         mapped or exported via DMABUF. These orphaned buffers will be freed
         when they are unmapped or when the exported DMABUF fds are closed.
+    * - ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF``
+      - 0x00000020
+      - Only valid for stateless decoders. If set, then userspace can set the
+        ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag to hold off on returning the
+	capture buffer until the OUTPUT timestamp changes.
 
 Return Value
 ============

drivers/media/common/videobuf2/videobuf2-v4l2.c

@@ -49,8 +49,11 @@ module_param(debug, int, 0644);
 				 V4L2_BUF_FLAG_REQUEST_FD | \
 				 V4L2_BUF_FLAG_TIMESTAMP_MASK)
 /* Output buffer flags that should be passed on to the driver */
-#define V4L2_BUFFER_OUT_FLAGS	(V4L2_BUF_FLAG_PFRAME | V4L2_BUF_FLAG_BFRAME | \
-				 V4L2_BUF_FLAG_KEYFRAME | V4L2_BUF_FLAG_TIMECODE)
+#define V4L2_BUFFER_OUT_FLAGS	(V4L2_BUF_FLAG_PFRAME | \
+				 V4L2_BUF_FLAG_BFRAME | \
+				 V4L2_BUF_FLAG_KEYFRAME | \
+				 V4L2_BUF_FLAG_TIMECODE | \
+				 V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF)
 
 /*
  * __verify_planes_array() - verify that the planes array passed in struct
@@ -194,6 +197,7 @@ static int vb2_fill_vb2_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b
 	}
 	vbuf->sequence = 0;
 	vbuf->request_fd = -1;
+	vbuf->is_held = false;
 
 	if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) {
 		switch (b->memory) {
@@ -321,6 +325,8 @@ static int vb2_fill_vb2_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b
 		 */
 		vbuf->flags &= ~V4L2_BUF_FLAG_TIMECODE;
 		vbuf->field = b->field;
+		if (!(q->subsystem_flags & VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF))
+			vbuf->flags &= ~V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF;
 	} else {
 		/* Zero any output buffer flags as this is a capture buffer */
 		vbuf->flags &= ~V4L2_BUFFER_OUT_FLAGS;
@@ -654,6 +660,8 @@ static void fill_buf_caps(struct vb2_queue *q, u32 *caps)
 		*caps |= V4L2_BUF_CAP_SUPPORTS_USERPTR;
 	if (q->io_modes & VB2_DMABUF)
 		*caps |= V4L2_BUF_CAP_SUPPORTS_DMABUF;
+	if (q->subsystem_flags & VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF)
+		*caps |= V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF;
 #ifdef CONFIG_MEDIA_CONTROLLER_REQUEST_API
 	if (q->supports_requests)
 		*caps |= V4L2_BUF_CAP_SUPPORTS_REQUESTS;

include/media/videobuf2-core.h

@@ -505,6 +505,8 @@ struct vb2_buf_ops {
  * @buf_ops:	callbacks to deliver buffer information.
  *		between user-space and kernel-space.
  * @drv_priv:	driver private data.
+ * @subsystem_flags: Flags specific to the subsystem (V4L2/DVB/etc.). Not used
+ *		by the vb2 core.
  * @buf_struct_size: size of the driver-specific buffer structure;
  *		"0" indicates the driver doesn't want to use a custom buffer
  *		structure type. for example, ``sizeof(struct vb2_v4l2_buffer)``
@@ -571,6 +573,7 @@ struct vb2_queue {
 	const struct vb2_buf_ops	*buf_ops;
 
 	void				*drv_priv;
+	u32				subsystem_flags;
 	unsigned int			buf_struct_size;
 	u32				timestamp_flags;
 	gfp_t				gfp_flags;

include/media/videobuf2-v4l2.h

@@ -33,6 +33,7 @@
  * @timecode:	frame timecode.
  * @sequence:	sequence count of this frame.
  * @request_fd:	the request_fd associated with this buffer
+ * @is_held:	if true, then this capture buffer was held
  * @planes:	plane information (userptr/fd, length, bytesused, data_offset).
  *
  * Should contain enough information to be able to cover all the fields
@@ -46,9 +47,13 @@ struct vb2_v4l2_buffer {
 	struct v4l2_timecode	timecode;
 	__u32			sequence;
 	__s32			request_fd;
+	bool			is_held;
 	struct vb2_plane	planes[VB2_MAX_PLANES];
 };
 
+/* VB2 V4L2 flags as set in vb2_queue.subsystem_flags */
+#define VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF (1 << 0)
+
 /*
  * to_vb2_v4l2_buffer() - cast struct vb2_buffer * to struct vb2_v4l2_buffer *
  */

include/uapi/linux/videodev2.h

@@ -920,11 +920,12 @@ struct v4l2_requestbuffers {
 };
 
 /* capabilities for struct v4l2_requestbuffers and v4l2_create_buffers */
-#define V4L2_BUF_CAP_SUPPORTS_MMAP	(1 << 0)
-#define V4L2_BUF_CAP_SUPPORTS_USERPTR	(1 << 1)
-#define V4L2_BUF_CAP_SUPPORTS_DMABUF	(1 << 2)
-#define V4L2_BUF_CAP_SUPPORTS_REQUESTS	(1 << 3)
-#define V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS (1 << 4)
+#define V4L2_BUF_CAP_SUPPORTS_MMAP			(1 << 0)
+#define V4L2_BUF_CAP_SUPPORTS_USERPTR			(1 << 1)
+#define V4L2_BUF_CAP_SUPPORTS_DMABUF			(1 << 2)
+#define V4L2_BUF_CAP_SUPPORTS_REQUESTS			(1 << 3)
+#define V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS		(1 << 4)
+#define V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF	(1 << 5)
 
 /**
  * struct v4l2_plane - plane info for multi-planar buffers
@@ -1046,6 +1047,8 @@ static inline __u64 v4l2_timeval_to_ns(const struct timeval *tv)
 #define V4L2_BUF_FLAG_IN_REQUEST		0x00000080
 /* timecode field is valid */
 #define V4L2_BUF_FLAG_TIMECODE			0x00000100
+/* Don't return the capture buffer until OUTPUT timestamp changes */
+#define V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF	0x00000200
 /* Buffer is prepared for queuing */
 #define V4L2_BUF_FLAG_PREPARED			0x00000400
 /* Cache handling flags */