Merge tag 'devicetree-fixes-for-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Correct the JSON pointer syntax in binding schemas

 - Drop unnecessary *-supply schema constraints

 - Drop redundant maxItems/items on array schemas

 - Fix various yamllint warnings

 - Fix various missing 'additionalProperties' properties

* tag 'devicetree-fixes-for-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Drop redundant maxItems/items
  dt-bindings: net: qcom,ipa: Drop unnecessary type ref on 'memory-region'
  dt-bindings: Drop unnecessary *-supply schemas properties
  dt-bindings/display: abt,y030xx067a: Fix binding
  dt-bindings: clock: imx8qxp-lpcg: eliminate yamllint warnings
  dt-bindings: display: eliminate yamllint warnings
  dt-bindings: media: nokia,smia: eliminate yamllint warnings
  dt-bindings: devapc: add the required property 'additionalProperties'
  dt-bindings: soc: add the required property 'additionalProperties'
  dt-bindings: serial: add the required property 'additionalProperties'
  dt-bindings: xlnx,vcu-settings: fix dt_binding_check warnings
  media: dt-bindings: coda: Add missing 'additionalProperties'
  dt-bindings: Fix JSON pointers

Documentation/devicetree/bindings/arm/idle-states.yaml

@@ -313,7 +313,7 @@ patternProperties:
           wakeup-latency-us by this duration.
 
       idle-state-name:
-        $ref: /schemas/types.yaml#definitions/string
+        $ref: /schemas/types.yaml#/definitions/string
         description:
           A string used as a descriptive name for the idle state.
 

Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml

@@ -34,7 +34,7 @@ properties:
     description:
       The SRAM that needs to be claimed to access the display engine
       bus.
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     maxItems: 1
 
   ranges: true

Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml

@@ -46,7 +46,7 @@ properties:
     const: 1
 
   syscon:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: Phandle to the Baikal-T1 System Controller DT node
 
   interrupts:

Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml

@@ -29,18 +29,18 @@ properties:
       - const: fsl,imx8qxp-lpcg
       - items:
           - enum:
-            - fsl,imx8qm-lpcg
+              - fsl,imx8qm-lpcg
           - const: fsl,imx8qxp-lpcg
       - enum:
-        - fsl,imx8qxp-lpcg-adma
-        - fsl,imx8qxp-lpcg-conn
-        - fsl,imx8qxp-lpcg-dc
-        - fsl,imx8qxp-lpcg-dsp
-        - fsl,imx8qxp-lpcg-gpu
-        - fsl,imx8qxp-lpcg-hsio
-        - fsl,imx8qxp-lpcg-img
-        - fsl,imx8qxp-lpcg-lsio
-        - fsl,imx8qxp-lpcg-vpu
+          - fsl,imx8qxp-lpcg-adma
+          - fsl,imx8qxp-lpcg-conn
+          - fsl,imx8qxp-lpcg-dc
+          - fsl,imx8qxp-lpcg-dsp
+          - fsl,imx8qxp-lpcg-gpu
+          - fsl,imx8qxp-lpcg-hsio
+          - fsl,imx8qxp-lpcg-img
+          - fsl,imx8qxp-lpcg-lsio
+          - fsl,imx8qxp-lpcg-vpu
         deprecated: true
   reg:
     maxItems: 1

Documentation/devicetree/bindings/connector/usb-connector.yaml

@@ -37,7 +37,7 @@ properties:
     description: Size of the connector, should be specified in case of
       non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
       connectors.
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
 
     enum:
       - mini
@@ -67,7 +67,7 @@ properties:
   power-role:
     description: Determines the power role that the Type C connector will
       support. "dual" refers to Dual Role Port (DRP).
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
 
     enum:
       - source
@@ -76,7 +76,7 @@ properties:
 
   try-power-role:
     description: Preferred power role.
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
 
     enum:
       - source
@@ -86,7 +86,7 @@ properties:
   data-role:
     description: Data role if Type C connector supports USB data. "dual" refers
       Dual Role Device (DRD).
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
 
     enum:
       - host
@@ -105,7 +105,7 @@ properties:
         Type-C Cable and Connector specification, when Power Delivery is not
         supported.
     allOf:
-      - $ref: /schemas/types.yaml#definitions/string
+      - $ref: /schemas/types.yaml#/definitions/string
     enum:
       - default
       - 1.5A

Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml

@@ -49,8 +49,8 @@ properties:
           Video port for panel or connector.
 
     required:
-        - port@0
-        - port@1
+      - port@0
+      - port@1
 
 required:
   - compatible

Documentation/devicetree/bindings/display/bridge/anx6345.yaml

@@ -26,11 +26,9 @@ properties:
     description: GPIO connected to active low reset
 
   dvdd12-supply:
-    maxItems: 1
     description: Regulator for 1.2V digital core power.
 
   dvdd25-supply:
-    maxItems: 1
     description: Regulator for 2.5V digital core power.
 
   ports:

Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml

@@ -39,10 +39,10 @@ properties:
 
     properties:
       '#address-cells':
-       const: 1
+        const: 1
 
       '#size-cells':
-       const: 0
+        const: 0
 
       port@0:
         type: object

Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml

@@ -35,11 +35,9 @@ properties:
     maxItems: 1
 
   ovdd-supply:
-    maxItems: 1
     description: I/O voltage
 
   pwr18-supply:
-    maxItems: 1
     description: core voltage
 
   interrupts:

Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml

@@ -79,8 +79,7 @@ properties:
       The GPIO used to control the power down line of this device.
     maxItems: 1
 
-  power-supply:
-    maxItems: 1
+  power-supply: true
 
 required:
   - compatible

Documentation/devicetree/bindings/display/bridge/ps8640.yaml

@@ -35,11 +35,9 @@ properties:
     description: GPIO connected to active low reset.
 
   vdd12-supply:
-    maxItems: 1
     description: Regulator for 1.2V digital core power.
 
   vdd33-supply:
-    maxItems: 1
     description: Regulator for 3.3V digital core power.
 
   ports:

Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml

@@ -60,7 +60,6 @@ properties:
     description: GPIO controlling bridge enable
 
   vdd-supply:
-    maxItems: 1
     description: Power supply for the bridge
 
 required:

Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml

@@ -74,7 +74,6 @@ properties:
     description: Power down GPIO signal, pin name "/PDWN", active low.
 
   vcc-supply:
-    maxItems: 1
     description:
       Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
       digital circuitry.

Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml

@@ -28,11 +28,9 @@ properties:
     description: i2c address of the bridge, 0x0f
 
   vdd-supply:
-    maxItems: 1
     description: 1.2V LVDS Power Supply
 
   vddio-supply:
-    maxItems: 1
     description: 1.8V IO Power Supply
 
   stby-gpios:

Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml

@@ -18,8 +18,8 @@ description: |
 properties:
   compatible:
     items:
-     - const: intel,keembay-msscam
-     - const: syscon
+      - const: intel,keembay-msscam
+      - const: syscon
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml

@@ -32,7 +32,7 @@ required:
   - power-supply
   - reset-gpios
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml

@@ -22,7 +22,7 @@ properties:
   compatible:
     items:
       - enum:
-         - tianma,fhd-video
+          - tianma,fhd-video
       - const: novatek,nt36672a
     description: This indicates the panel manufacturer of the panel that is
       in turn using the NT36672A panel driver. This compatible string

Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml

@@ -98,7 +98,6 @@ properties:
     maxItems: 1
 
   dmas:
-    maxItems: 4
     items:
       - description: Video layer, plane 0 (RGB or luma)
       - description: Video layer, plane 1 (U/V or U)

Documentation/devicetree/bindings/dma/dma-common.yaml

@@ -38,12 +38,12 @@ properties:
       maxItems: 255
 
   dma-channels:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of DMA channels supported by the controller.
 
   dma-requests:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of DMA request signals supported by the controller.
 

Documentation/devicetree/bindings/dma/dma-router.yaml

@@ -23,7 +23,7 @@ properties:
     pattern: "^dma-router(@.*)?$"
 
   dma-masters:
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
       Array of phandles to the DMA controllers the router can direct
       the signal to.

Documentation/devicetree/bindings/dma/ingenic,dma.yaml

@@ -48,7 +48,7 @@ properties:
         ingenic,reserved-channels property.
 
   ingenic,reserved-channels:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: >
       Bitmask of channels to reserve for devices that need a specific
       channel. These channels will only be assigned when explicitely

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml

@@ -73,7 +73,6 @@ properties:
     maxItems: 1
 
   clock-names:
-    maxItems: 1
     items:
       - const: fck
 

Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml

@@ -54,7 +54,7 @@ properties:
     maximum: 16
 
   dma-masters:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Number of DMA masters supported by the controller. In case if
       not specified the driver will try to auto-detect this and
@@ -63,7 +63,7 @@ properties:
     maximum: 4
 
   chan_allocation_order:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       DMA channels allocation order specifier. Zero means ascending order
       (first free allocated), while one - descending (last free allocated).
@@ -71,7 +71,7 @@ properties:
     enum: [0, 1]
 
   chan_priority:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       DMA channels priority order. Zero means ascending channels priority
       so the very first channel has the highest priority. While 1 means
@@ -80,7 +80,7 @@ properties:
     enum: [0, 1]
 
   block_size:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Maximum block size supported by the DMA controller.
     enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095]
 
@@ -139,7 +139,7 @@ properties:
         default: 256
 
   snps,dma-protection-control:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting
       indicates the following features: bit 0 - privileged mode,

Documentation/devicetree/bindings/eeprom/at24.yaml

@@ -131,7 +131,7 @@ properties:
     default: 1
 
   read-only:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Disables writes to the eeprom.
 
@@ -141,7 +141,7 @@ properties:
       Total eeprom size in bytes.
 
   no-read-rollover:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Indicates that the multi-address eeprom does not automatically roll
       over reads to the next slave address. Please consult the manual of

Documentation/devicetree/bindings/eeprom/at25.yaml

@@ -45,13 +45,13 @@ properties:
   spi-max-frequency: true
 
   pagesize:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
     description:
       Size of the eeprom page.
 
   size:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Total eeprom size in bytes.
 

Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml

@@ -32,7 +32,7 @@ properties:
       PVT controller has 5 VM (voltage monitor) sensors.
       vm-map defines CPU core to VM instance mapping. A
       value of 0xff means that VM sensor is unused.
-    $ref: /schemas/types.yaml#definitions/uint8-array
+    $ref: /schemas/types.yaml#/definitions/uint8-array
     maxItems: 5
 
   clocks:

Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml

@@ -29,12 +29,12 @@ properties:
     const: 0x70
 
   sensirion,blocking-io:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       If set, the driver hold the i2c bus until measurement is finished.
 
   sensirion,low-precision:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       If set, the sensor aquire data with low precision (not recommended).
       The driver aquire data with high precision by default.

Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml

@@ -61,7 +61,7 @@ properties:
       Array of three(TMP513) or two(TMP512) n-Factor value for each remote
       temperature channel.
       See datasheet Table 11 for n-Factor range list and value interpretation.
-    $ref: /schemas/types.yaml#definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 2
     maxItems: 3
     items:

Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml

@@ -17,8 +17,7 @@ properties:
       - lltc,ltc2496
 
   vref-supply:
-    description: phandle to an external regulator providing the reference voltage
-    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Power supply for the reference voltage
 
   reg:
     description: spi chipselect number according to the usual spi bindings

Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml

@@ -22,8 +22,7 @@ properties:
       - ti,hdc2010
       - ti,hdc2080
 
-  vdd-supply:
-    maxItems: 1
+  vdd-supply: true
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml

@@ -45,7 +45,7 @@ properties:
     default: 0x16
 
   upisemi,continuous:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description: |
       This chip has two power modes: one-shot (chip takes one measurement and
       then shuts itself down) and continuous (chip takes continuous

Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml

@@ -72,7 +72,7 @@ properties:
       - finest
 
   semtech,startup-sensor:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 2, 3]
     default: 0
     description:
@@ -81,7 +81,7 @@ properties:
       compensation.
 
   semtech,proxraw-strength:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 2, 4, 8]
     default: 2
     description:
@@ -89,7 +89,7 @@ properties:
       represent 1-1/N.
 
   semtech,avg-pos-strength:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
     default: 16
     description:

Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml

@@ -31,8 +31,7 @@ properties:
   interrupts:
     maxItems: 1
 
-  vdd-supply:
-    maxItems: 1
+  vdd-supply: true
 
   linux,keycodes:
     minItems: 1

Documentation/devicetree/bindings/input/gpio-keys.yaml

@@ -34,13 +34,13 @@ patternProperties:
 
         linux,code:
           description: Key / Axis code to emit.
-          $ref: /schemas/types.yaml#definitions/uint32
+          $ref: /schemas/types.yaml#/definitions/uint32
 
         linux,input-type:
           description:
             Specify event type this button/key generates. If not specified defaults to
             <1> == EV_KEY.
-          $ref: /schemas/types.yaml#definitions/uint32
+          $ref: /schemas/types.yaml#/definitions/uint32
 
           default: 1
 
@@ -56,12 +56,12 @@ patternProperties:
 
             linux,input-value = <0xffffffff>; /* -1 */
 
-          $ref: /schemas/types.yaml#definitions/uint32
+          $ref: /schemas/types.yaml#/definitions/uint32
 
         debounce-interval:
           description:
             Debouncing interval time in milliseconds. If not specified defaults to 5.
-          $ref: /schemas/types.yaml#definitions/uint32
+          $ref: /schemas/types.yaml#/definitions/uint32
 
           default: 5
 
@@ -79,7 +79,7 @@ patternProperties:
               EV_ACT_ANY        - both asserted and deasserted
               EV_ACT_ASSERTED   - asserted
               EV_ACT_DEASSERTED - deasserted
-          $ref: /schemas/types.yaml#definitions/uint32
+          $ref: /schemas/types.yaml#/definitions/uint32
           enum: [0, 1, 2]
 
         linux,can-disable:
@@ -118,7 +118,7 @@ then:
     poll-interval:
       description:
         Poll interval time in milliseconds
-      $ref: /schemas/types.yaml#definitions/uint32
+      $ref: /schemas/types.yaml#/definitions/uint32
 
   required:
     - poll-interval

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml

@@ -55,8 +55,7 @@ properties:
 
   wakeup-source: true
 
-  vcc-supply:
-    maxItems: 1
+  vcc-supply: true
 
   gain:
     description: Allows setting the sensitivity in the range from 0 to 31.

Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml

@@ -42,7 +42,7 @@ properties:
       Specifies the list of CPU interrupt vectors to which the GIC may not
       route interrupts. This property is ignored if the CPU is started in EIC
       mode.
-    $ref: /schemas/types.yaml#definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 6
     uniqueItems: true
@@ -56,7 +56,7 @@ properties:
       It accepts two values: the 1st is the starting interrupt and the 2nd is
       the size of the reserved range. If not specified, the driver will
       allocate the last (2 * number of VPEs in the system).
-    $ref: /schemas/types.yaml#definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       - minimum: 0
         maximum: 254

Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml

@@ -80,7 +80,7 @@ properties:
       mapping is provided.
 
   ti,irqs-reserved:
-    $ref: /schemas/types.yaml#definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/uint8
     description: |
       Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC
       output interrupts 2 through 9) that are not connected to the Arm interrupt

Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml

@@ -76,7 +76,7 @@ properties:
             "limit" specifies the limit for translation
 
   ti,unmapped-event-sources:
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
       Array of phandles to DMA controllers where the unmapped events originate.
 

Documentation/devicetree/bindings/leds/backlight/common.yaml

@@ -22,7 +22,7 @@ properties:
       The default brightness that should be applied to the LED by the operating
       system on start-up. The brightness should not exceed the brightness the
       LED can provide.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   max-brightness:
     description:
@@ -31,6 +31,6 @@ properties:
       on the brightness apart from what the driver says, as it could happen
       that a LED can be made so bright that it gets damaged or causes damage
       due to restrictions in a specific system, such as mounting conditions.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
 additionalProperties: true

Documentation/devicetree/bindings/leds/common.yaml

@@ -27,21 +27,21 @@ properties:
       List of device current outputs the LED is connected to. The outputs are
       identified by the numbers that must be defined in the LED device binding
       documentation.
-    $ref: /schemas/types.yaml#definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   function:
     description:
       LED function. Use one of the LED_FUNCTION_* prefixed definitions
       from the header include/dt-bindings/leds/common.h. If there is no
       matching LED_FUNCTION available, add a new one.
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
 
   color:
     description:
       Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
       the header include/dt-bindings/leds/common.h. If there is no matching
       LED_COLOR_ID available, add a new one.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 9
 
@@ -49,7 +49,7 @@ properties:
     description:
       Integer to be used when more than one instance of the same function is
       needed, differing only with an ordinal number.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   label:
     description:
@@ -66,7 +66,7 @@ properties:
       produced where the LED momentarily turns off (or on). The "keep" setting
       will keep the LED at whatever its current state is, without producing a
       glitch.
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
     enum:
       - on
       - off
@@ -77,7 +77,7 @@ properties:
     description:
       This parameter, if present, is a string defining the trigger assigned to
       the LED.
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
 
     enum:
         # LED will act as a back-light, controlled by the framebuffer system
@@ -109,7 +109,7 @@ properties:
           brightness and duration (in ms).  The exact format is
           described in:
           Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
-    $ref: /schemas/types.yaml#definitions/uint32-matrix
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     items:
       minItems: 2
       maxItems: 2
@@ -143,7 +143,7 @@ properties:
       the device tree and be referenced by a phandle and a set of phandle
       arguments. A length of arguments should be specified by the
       #trigger-source-cells property in the source node.
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
 
   # Required properties for flash LED child nodes:
   flash-max-microamp:

Documentation/devicetree/bindings/leds/leds-lp55xx.yaml

@@ -35,7 +35,7 @@ properties:
     description: I2C slave address
 
   clock-mode:
-    $ref: /schemas/types.yaml#definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/uint8
     description: |
       Input clock mode
     enum:
@@ -49,7 +49,7 @@ properties:
       GPIO attached to the chip's enable pin
 
   pwr-sel:
-    $ref: /schemas/types.yaml#definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/uint8
     description: |
       LP8501 specific property. Power selection for output channels.
     enum:
@@ -70,14 +70,14 @@ patternProperties:
     $ref: common.yaml#
     properties:
       led-cur:
-        $ref: /schemas/types.yaml#definitions/uint8
+        $ref: /schemas/types.yaml#/definitions/uint8
         description: |
           Current setting at each LED channel (mA x10, 0 if LED is not connected)
         minimum: 0
         maximum: 255
 
       max-cur:
-        $ref: /schemas/types.yaml#definitions/uint8
+        $ref: /schemas/types.yaml#/definitions/uint8
         description: Maximun current at each LED channel.
 
       reg:
@@ -97,7 +97,7 @@ patternProperties:
           - 8 # LED output D9
 
       chan-name:
-        $ref: /schemas/types.yaml#definitions/string
+        $ref: /schemas/types.yaml#/definitions/string
         description: name of channel
 
 required:

Documentation/devicetree/bindings/mailbox/arm,mhu.yaml

@@ -61,7 +61,6 @@ properties:
       - description: low-priority non-secure
       - description: high-priority non-secure
       - description: Secure
-    maxItems: 3
 
   clocks:
     maxItems: 1

Documentation/devicetree/bindings/media/coda.yaml

@@ -44,6 +44,21 @@ properties:
       - const: per
       - const: ahb
 
+  interrupts:
+    minItems: 1
+    items:
+      - description: BIT processor interrupt
+      - description: JPEG unit interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: bit
+      - const: jpeg
+
+  power-domains:
+    maxItems: 1
+
   resets:
     maxItems: 1
 
@@ -59,6 +74,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 allOf:
   - if:
       properties:
@@ -68,34 +85,17 @@ allOf:
     then:
       properties:
         interrupts:
-          items:
-            - description: BIT processor interrupt
-            - description: JPEG unit interrupt
+          minItems: 2
 
         interrupt-names:
-          items:
-            - const: bit
-            - const: jpeg
+          minItems: 2
     else:
       properties:
         interrupts:
-          items:
-            - description: BIT processor interrupt
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - fsl,imx6dl-vpu
-              - fsl,imx6q-vpu
-    then:
-      properties:
-        power-domains:
-          $ref: /schemas/types.yaml#/definitions/phandle
-          description: phandle pointing to the PU power domain
           maxItems: 1
 
+        power-domains: false
+
 examples:
   - |
     vpu: video-codec@63ff4000 {

Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml

@@ -40,7 +40,6 @@ properties:
 
   poc-supply:
     description: Regulator providing Power over Coax to the cameras
-    maxItems: 1
 
   enable-gpios:
     description: GPIO connected to the \#PWDN pin with inverted polarity

Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml

 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 # Copyright (C) 2014--2020 Intel Corporation
-
+%YAML 1.2
+---
 $id: http://devicetree.org/schemas/media/i2c/mipi-ccs.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
@@ -26,11 +27,11 @@ properties:
   compatible:
     oneOf:
       - items:
-        - const: mipi-ccs-1.1
-        - const: mipi-ccs
+          - const: mipi-ccs-1.1
+          - const: mipi-ccs
       - items:
-        - const: mipi-ccs-1.0
-        - const: mipi-ccs
+          - const: mipi-ccs-1.0
+          - const: mipi-ccs
       - const: nokia,smia
 
   reg:
@@ -38,15 +39,12 @@ properties:
 
   vana-supply:
     description: Analogue voltage supply (VANA), sensor dependent.
-    maxItems: 1
 
   vcore-supply:
     description: Core voltage supply (VCore), sensor dependent.
-    maxItems: 1
 
   vio-supply:
     description: I/O voltage supply (VIO), sensor dependent.
-    maxItems: 1
 
   clocks:
     description: External clock to the sensor.

Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml

@@ -37,15 +37,12 @@ properties:
 
   vdddo-supply:
     description: Chip digital IO regulator (1.8V).
-    maxItems: 1
 
   vdda-supply:
     description: Chip analog regulator (2.7V).
-    maxItems: 1
 
   vddd-supply:
     description: Chip digital core regulator (1.12V).
-    maxItems: 1
 
   flash-leds:
     description: See ../video-interfaces.txt

Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml

@@ -33,15 +33,12 @@ properties:
 
   vana-supply:
     description: Sensor 2.8 V analog supply.
-    maxItems: 1
 
   vdig-supply:
     description: Sensor 1.8 V digital core supply.
-    maxItems: 1
 
   vddl-supply:
     description: Sensor digital IO 1.2 V supply.
-    maxItems: 1
 
   port:
     type: object

Documentation/devicetree/bindings/mfd/st,stmfx.yaml

@@ -26,8 +26,7 @@ properties:
 
   drive-open-drain: true
 
-  vdd-supply:
-    maxItems: 1
+  vdd-supply: true
 
   pinctrl:
     type: object

Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml

@@ -38,7 +38,7 @@ properties:
     const: stmmaceth
 
   syscon:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to the device containing the EMAC or GMAC clock
       register
@@ -114,7 +114,7 @@ allOf:
     then:
       properties:
         allwinner,leds-active-low:
-          $ref: /schemas/types.yaml#definitions/flag
+          $ref: /schemas/types.yaml#/definitions/flag
           description:
             EPHY LEDs are active low.
 
@@ -126,7 +126,7 @@ allOf:
               const: allwinner,sun8i-h3-mdio-mux
 
             mdio-parent-bus:
-              $ref: /schemas/types.yaml#definitions/phandle
+              $ref: /schemas/types.yaml#/definitions/phandle
               description:
                 Phandle to EMAC MDIO.
 

Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml

@@ -60,7 +60,7 @@ allOf:
             - const: timing-adjustment
 
         amlogic,tx-delay-ns:
-          $ref: /schemas/types.yaml#definitions/uint32
+          $ref: /schemas/types.yaml#/definitions/uint32
           description:
             The internal RGMII TX clock delay (provided by this driver) in
             nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns.

Documentation/devicetree/bindings/net/dsa/dsa.yaml

@@ -54,7 +54,7 @@ patternProperties:
             description:
               Describes the label associated with this port, which will become
               the netdev name
-            $ref: /schemas/types.yaml#definitions/string
+            $ref: /schemas/types.yaml#/definitions/string
 
           link:
             description:
@@ -62,13 +62,13 @@ patternProperties:
               port is used as the outgoing port towards the phandle ports. The
               full routing information must be given, not just the one hop
               routes to neighbouring switches
-            $ref: /schemas/types.yaml#definitions/phandle-array
+            $ref: /schemas/types.yaml#/definitions/phandle-array
 
           ethernet:
             description:
               Should be a phandle to a valid Ethernet device node.  This host
               device is what the switch port is connected to
-            $ref: /schemas/types.yaml#definitions/phandle
+            $ref: /schemas/types.yaml#/definitions/phandle
 
           phy-handle: true
 

Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -16,7 +16,7 @@ properties:
   local-mac-address:
     description:
       Specifies the MAC address that was assigned to the network device.
-    $ref: /schemas/types.yaml#definitions/uint8-array
+    $ref: /schemas/types.yaml#/definitions/uint8-array
     items:
       - minItems: 6
         maxItems: 6
@@ -27,20 +27,20 @@ properties:
       program; should be used in cases where the MAC address assigned
       to the device by the boot program is different from the
       local-mac-address property.
-    $ref: /schemas/types.yaml#definitions/uint8-array
+    $ref: /schemas/types.yaml#/definitions/uint8-array
     items:
       - minItems: 6
         maxItems: 6
 
   max-frame-size:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Maximum transfer unit (IEEE defined MTU), rather than the
       maximum frame size (there\'s contradiction in the Devicetree
       Specification).
 
   max-speed:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Specifies maximum speed in Mbit/s supported by the device.
 
@@ -101,7 +101,7 @@ properties:
     $ref: "#/properties/phy-connection-type"
 
   phy-handle:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Specifies a reference to a node representing a PHY device.
 
@@ -114,7 +114,7 @@ properties:
     deprecated: true
 
   rx-fifo-depth:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The size of the controller\'s receive fifo in bytes. This is used
       for components that can have configurable receive fifo sizes,
@@ -129,12 +129,12 @@ properties:
       If this property is present then the MAC applies the RX delay.
 
   sfp:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Specifies a reference to a node representing a SFP cage.
 
   tx-fifo-depth:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       The size of the controller\'s transmit fifo in bytes. This
       is used for components that can have configurable fifo sizes.
@@ -150,7 +150,7 @@ properties:
     description:
       Specifies the PHY management type. If auto is set and fixed-link
       is not specified, it uses MDIO for management.
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
     default: auto
     enum:
       - auto
@@ -198,17 +198,17 @@ properties:
             speed:
               description:
                 Link speed.
-              $ref: /schemas/types.yaml#definitions/uint32
+              $ref: /schemas/types.yaml#/definitions/uint32
               enum: [10, 100, 1000]
 
             full-duplex:
-              $ref: /schemas/types.yaml#definitions/flag
+              $ref: /schemas/types.yaml#/definitions/flag
               description:
                 Indicates that full-duplex is used. When absent, half
                 duplex is assumed.
 
             asym-pause:
-              $ref: /schemas/types.yaml#definitions/flag
+              $ref: /schemas/types.yaml#/definitions/flag
               description:
                 Indicates that asym_pause should be enabled.
 

Documentation/devicetree/bindings/net/ethernet-phy.yaml

@@ -78,57 +78,57 @@ properties:
       Maximum PHY supported speed in Mbits / seconds.
 
   broken-turn-around:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       If set, indicates the PHY device does not correctly release
       the turn around line low at end of the control phase of the
       MDIO transaction.
 
   enet-phy-lane-swap:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       If set, indicates the PHY will swap the TX/RX lanes to
       compensate for the board being designed with the lanes
       swapped.
 
   eee-broken-100tx:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   eee-broken-1000t:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   eee-broken-10gt:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   eee-broken-1000kx:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   eee-broken-10gkx4:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   eee-broken-10gkr:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
   phy-is-integrated:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       If set, indicates that the PHY is integrated into the same
       physical package as the Ethernet MAC. If needed, muxers
@@ -158,7 +158,7 @@ properties:
       this property is missing the delay will be skipped.
 
   sfp:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Specifies a reference to a node representing a SFP cage.
 

Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml

@@ -31,7 +31,7 @@ properties:
   phy-mode: true
 
   pcs-handle:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       A reference to a node representing a PCS PHY device found on
       the internal MDIO bus.

Documentation/devicetree/bindings/net/mdio.yaml

@@ -70,7 +70,7 @@ patternProperties:
           The ID number for the device.
 
       broken-turn-around:
-        $ref: /schemas/types.yaml#definitions/flag
+        $ref: /schemas/types.yaml#/definitions/flag
         description:
           If set, indicates the MDIO device does not correctly release
           the turn around line low at end of the control phase of the

Documentation/devicetree/bindings/net/mediatek,star-emac.yaml

@@ -42,7 +42,7 @@ properties:
       - const: trans
 
   mediatek,pericfg:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to the device containing the PERICFG register range. This is used
       to control the MII mode.

Documentation/devicetree/bindings/net/qcom,ipa.yaml

@@ -114,14 +114,13 @@ properties:
       validating firwmare used by the GSI.
 
   modem-remoteproc:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       This defines the phandle to the remoteproc node representing
       the modem subsystem.  This is requied so the IPA driver can
       receive and act on notifications of modem up/down events.
 
   memory-region:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
     maxItems: 1
     description:
       If present, a phandle for a reserved memory area that holds

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -126,7 +126,7 @@ properties:
       in a different mode than the PHY in order to function.
 
   snps,axi-config:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       AXI BUS Mode parameters. Phandle to a node that can contain the
       following properties
@@ -141,7 +141,7 @@ properties:
         * snps,rb, rebuild INCRx Burst
 
   snps,mtl-rx-config:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Multiple RX Queues parameters. Phandle to a node that can
       contain the following properties
@@ -164,7 +164,7 @@ properties:
           * snps,priority, RX queue priority (Range 0x0 to 0xF)
 
   snps,mtl-tx-config:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Multiple TX Queues parameters. Phandle to a node that can
       contain the following properties
@@ -198,7 +198,7 @@ properties:
 
   snps,reset-active-low:
     deprecated: true
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Indicates that the PHY Reset is active low
 
@@ -208,55 +208,55 @@ properties:
       Triplet of delays. The 1st cell is reset pre-delay in micro
       seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
       cell is reset post-delay in micro seconds.
-    $ref: /schemas/types.yaml#definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 3
     maxItems: 3
 
   snps,aal:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Use Address-Aligned Beats
 
   snps,fixed-burst:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Program the DMA to use the fixed burst mode
 
   snps,mixed-burst:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Program the DMA to use the mixed burst mode
 
   snps,force_thresh_dma_mode:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Force DMA to use the threshold mode for both tx and rx
 
   snps,force_sf_dma_mode:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Force DMA to use the Store and Forward mode for both tx and
       rx. This flag is ignored if force_thresh_dma_mode is set.
 
   snps,en-tx-lpi-clockgating:
-    $ref: /schemas/types.yaml#definitions/flag
+    $ref: /schemas/types.yaml#/definitions/flag
     description:
       Enable gating of the MAC TX clock during TX low-power mode
 
   snps,multicast-filter-bins:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of multicast filter hash bins supported by this device
       instance
 
   snps,perfect-filter-entries:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Number of perfect filter entries supported by this device
       instance
 
   snps,ps-speed:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Port selection speed that can be passed to the core when PCS
       is supported. For example, this is used in case of SGMII and
@@ -307,25 +307,25 @@ allOf:
         snps,pbl:
           description:
             Programmable Burst Length (tx and rx)
-          $ref: /schemas/types.yaml#definitions/uint32
+          $ref: /schemas/types.yaml#/definitions/uint32
           enum: [2, 4, 8]
 
         snps,txpbl:
           description:
             Tx Programmable Burst Length. If set, DMA tx will use this
             value rather than snps,pbl.
-          $ref: /schemas/types.yaml#definitions/uint32
+          $ref: /schemas/types.yaml#/definitions/uint32
           enum: [2, 4, 8]
 
         snps,rxpbl:
           description:
             Rx Programmable Burst Length. If set, DMA rx will use this
             value rather than snps,pbl.
-          $ref: /schemas/types.yaml#definitions/uint32
+          $ref: /schemas/types.yaml#/definitions/uint32
           enum: [2, 4, 8]
 
         snps,no-pbl-x8:
-          $ref: /schemas/types.yaml#definitions/flag
+          $ref: /schemas/types.yaml#/definitions/flag
           description:
             Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core
             rev < 3.50, don\'t multiply the values by 4.
@@ -351,7 +351,7 @@ allOf:
     then:
       properties:
         snps,tso:
-          $ref: /schemas/types.yaml#definitions/flag
+          $ref: /schemas/types.yaml#/definitions/flag
           description:
             Enables the TSO feature otherwise it will be managed by
             MAC HW capability register.

Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml

@@ -64,7 +64,7 @@ properties:
       - const: ether    # for others
 
   socionext,syscon-phy-mode:
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
       A phandle to syscon with one argument that configures phy mode.
       The argument is the ID of MAC instance.

Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml

@@ -70,7 +70,7 @@ properties:
   pinctrl-names: true
 
   syscon:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to the system control device node which provides access to
       efuse IO range with MAC addresses

Documentation/devicetree/bindings/net/ti,dp83867.yaml

@@ -47,31 +47,31 @@ properties:
         takes precedence.
 
   tx-fifo-depth:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
        Transmitt FIFO depth see dt-bindings/net/ti-dp83867.h for values
 
   rx-fifo-depth:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
        Receive FIFO depth see dt-bindings/net/ti-dp83867.h for values
 
   ti,clk-output-sel:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Muxing option for CLK_OUT pin.  See dt-bindings/net/ti-dp83867.h
       for applicable values. The CLK_OUT pin can also be disabled by this
       property.  When omitted, the PHY's default will be left as is.
 
   ti,rx-internal-delay:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
       for applicable values. Required only if interface type is
       PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID.
 
   ti,tx-internal-delay:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
       for applicable values. Required only if interface type is
@@ -101,7 +101,7 @@ properties:
 
   ti,fifo-depth:
     deprecated: true
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable
       values.

Documentation/devicetree/bindings/net/ti,dp83869.yaml

@@ -44,22 +44,22 @@ properties:
        to a maximum value (70 ohms).
 
   tx-fifo-depth:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
        Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values
 
   rx-fifo-depth:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
        Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values
 
   ti,clk-output-sel:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
        Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values.
 
   ti,op-mode:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
        Operational mode for the PHY.  If this is not set then the operational
        mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values

Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml

@@ -119,12 +119,12 @@ properties:
             description: label associated with this port
 
           ti,mac-only:
-            $ref: /schemas/types.yaml#definitions/flag
+            $ref: /schemas/types.yaml#/definitions/flag
             description:
               Specifies the port works in mac-only mode.
 
           ti,syscon-efuse:
-            $ref: /schemas/types.yaml#definitions/phandle-array
+            $ref: /schemas/types.yaml#/definitions/phandle-array
             description:
               Phandle to the system control device node which provides access
               to efuse IO range with MAC addresses

Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml

@@ -136,7 +136,7 @@ properties:
       - const: tcl2host-status-ring
 
   qcom,rproc:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       DT entry of q6v5-wcss remoteproc driver.
       Phandle to a node that can contain the following properties

Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml

@@ -44,13 +44,13 @@ properties:
       - const: refclk
 
   syscon-phy-power:
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
       phandle/offset pair. Phandle to the system control module and
       register offset to power on/off the PHY.
 
   ctrl-module:
-    $ref: /schemas/types.yaml#definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       (deprecated) phandle of the control module used by PHY driver
       to power on the PHY. Use syscon-phy-power instead.

Documentation/devicetree/bindings/power/mediatek,power-controller.yaml

@@ -83,11 +83,11 @@ patternProperties:
           SUSBSYS clocks.
 
       mediatek,infracfg:
-        $ref: /schemas/types.yaml#definitions/phandle
+        $ref: /schemas/types.yaml#/definitions/phandle
         description: phandle to the device containing the INFRACFG register range.
 
       mediatek,smi:
-        $ref: /schemas/types.yaml#definitions/phandle
+        $ref: /schemas/types.yaml#/definitions/phandle
         description: phandle to the device containing the SMI register range.
 
     patternProperties:
@@ -131,11 +131,11 @@ patternProperties:
               SUSBSYS clocks.
 
           mediatek,infracfg:
-            $ref: /schemas/types.yaml#definitions/phandle
+            $ref: /schemas/types.yaml#/definitions/phandle
             description: phandle to the device containing the INFRACFG register range.
 
           mediatek,smi:
-            $ref: /schemas/types.yaml#definitions/phandle
+            $ref: /schemas/types.yaml#/definitions/phandle
             description: phandle to the device containing the SMI register range.
 
         patternProperties:
@@ -179,11 +179,11 @@ patternProperties:
                   SUSBSYS clocks.
 
               mediatek,infracfg:
-                $ref: /schemas/types.yaml#definitions/phandle
+                $ref: /schemas/types.yaml#/definitions/phandle
                 description: phandle to the device containing the INFRACFG register range.
 
               mediatek,smi:
-                $ref: /schemas/types.yaml#definitions/phandle
+                $ref: /schemas/types.yaml#/definitions/phandle
                 description: phandle to the device containing the SMI register range.
 
             required:

Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml

@@ -27,7 +27,7 @@ properties:
       of this binary blob is kept secret by CellWise. The only way to obtain
       it is to mail two batteries to a test facility of CellWise and receive
       back a test report with the binary blob.
-    $ref: /schemas/types.yaml#definitions/uint8-array
+    $ref: /schemas/types.yaml#/definitions/uint8-array
     minItems: 64
     maxItems: 64
 

Documentation/devicetree/bindings/powerpc/sleep.yaml

@@ -42,6 +42,6 @@ select: true
 
 properties:
   sleep:
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
 
 additionalProperties: true

Documentation/devicetree/bindings/regulator/anatop-regulator.yaml

@@ -59,7 +59,6 @@ properties:
     description: u32 value representing regulator enable bit offset.
 
   vin-supply:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
     description: input supply phandle.
 
 required:

Documentation/devicetree/bindings/serial/8250.yaml

@@ -126,7 +126,7 @@ properties:
     maxItems: 1
 
   current-speed:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: The current active speed of the UART.
 
   reg-offset:
@@ -154,7 +154,7 @@ properties:
       Set to indicate that the port does not implement loopback test mode.
 
   fifo-size:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: The fifo size of the UART.
 
   auto-flow-control:
@@ -165,7 +165,7 @@ properties:
       property.
 
   tx-threshold:
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Specify the TX FIFO low water indication for parts with programmable
       TX FIFO thresholds.

Documentation/devicetree/bindings/serial/litex,liteuart.yaml

@@ -29,6 +29,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     uart0: serial@e0001800 {

Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml

@@ -28,6 +28,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     soc_ctrl0: soc-controller@f0000000 {

Documentation/devicetree/bindings/soc/mediatek/devapc.yaml

@@ -44,6 +44,8 @@ required:
   - clocks
   - clock-names
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml

@@ -55,7 +55,7 @@ properties:
     description: TI-SCI RM subtype for GP ring range
 
   ti,sci:
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description: phandle on TI-SCI compatible System controller node
 
   ti,sci-dev-id:

Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml

@@ -26,9 +26,18 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
-    xlnx_vcu: vcu@a0041000 {
-          compatible = "xlnx,vcu-settings", "syscon";
-          reg = <0x0 0xa0041000 0x0 0x1000>;
+    fpga {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xlnx_vcu: vcu@a0041000 {
+            compatible = "xlnx,vcu-settings", "syscon";
+            reg = <0x0 0xa0041000 0x0 0x1000>;
+        };
     };
+
+...

Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml

@@ -57,7 +57,7 @@ properties:
       A list of the connections between audio components.  Each entry
       is a pair of strings, the first being the connection's sink, the
       second being the connection's source.
-    $ref: /schemas/types.yaml#definitions/non-unique-string-array
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
     minItems: 2
     maxItems: 18
     items:

Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml

@@ -44,7 +44,6 @@ properties:
     maxItems: 3
 
   clock-names:
-    maxItems: 3
     items:
       - const: hda
       - const: hda2hdmi
@@ -54,7 +53,6 @@ properties:
     maxItems: 3
 
   reset-names:
-    maxItems: 3
     items:
       - const: hda
       - const: hda2hdmi

Documentation/devicetree/bindings/sound/st,stm32-sai.yaml

@@ -106,7 +106,7 @@ patternProperties:
           Must contain the phandle and index of the SAI sub-block providing
           the synchronization.
         allOf:
-          - $ref: /schemas/types.yaml#definitions/phandle-array
+          - $ref: /schemas/types.yaml#/definitions/phandle-array
           - maxItems: 1
 
       st,iec60958:
@@ -117,7 +117,7 @@ patternProperties:
           configured according to protocol defined in related DAI link node,
           such as i2s, left justified, right justified, dsp and pdm protocols.
         allOf:
-          - $ref: /schemas/types.yaml#definitions/flag
+          - $ref: /schemas/types.yaml#/definitions/flag
 
       "#clock-cells":
         description: Configure the SAI device as master clock provider.

Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml

@@ -51,7 +51,6 @@ properties:
     maxItems: 1
 
   phy-names:
-    maxItems: 1
     items:
       - const: usb
 

Documentation/devicetree/bindings/usb/renesas,usbhs.yaml

@@ -74,11 +74,8 @@ properties:
 
   phys:
     maxItems: 1
-    items:
-      - description: phandle + phy specifier pair.
 
   phy-names:
-    maxItems: 1
     items:
       - const: usb