xen-netback: add support for IPv6 checksum offload to guest

Check xenstore flag feature-ipv6-csum-offload to determine if a
guest is happy to accept IPv6 packets with only partial checksum.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/xen-netback/common.h

@@ -153,7 +153,8 @@ struct xenvif {
 	u8 can_sg:1;
 	u8 gso:1;
 	u8 gso_prefix:1;
-	u8 csum:1;
+	u8 ip_csum:1;
+	u8 ipv6_csum:1;
 
 	/* Internal feature information. */
 	u8 can_queue:1;	    /* can queue packets for receiver? */

drivers/net/xen-netback/interface.c

@@ -216,8 +216,10 @@ static netdev_features_t xenvif_fix_features(struct net_device *dev,
 		features &= ~NETIF_F_SG;
 	if (!vif->gso && !vif->gso_prefix)
 		features &= ~NETIF_F_TSO;
-	if (!vif->csum)
+	if (!vif->ip_csum)
 		features &= ~NETIF_F_IP_CSUM;
+	if (!vif->ipv6_csum)
+		features &= ~NETIF_F_IPV6_CSUM;
 
 	return features;
 }
@@ -306,7 +308,7 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 	vif->domid  = domid;
 	vif->handle = handle;
 	vif->can_sg = 1;
-	vif->csum = 1;
+	vif->ip_csum = 1;
 	vif->dev = dev;
 
 	vif->credit_bytes = vif->remaining_credit = ~0UL;
@@ -316,7 +318,9 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 	vif->credit_timeout.expires = jiffies;
 
 	dev->netdev_ops	= &xenvif_netdev_ops;
-	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
+	dev->hw_features = NETIF_F_SG |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO;
 	dev->features = dev->hw_features;
 	SET_ETHTOOL_OPS(dev, &xenvif_ethtool_ops);
 

drivers/net/xen-netback/xenbus.c

@@ -574,7 +574,12 @@ static int connect_rings(struct backend_info *be)
 	if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-no-csum-offload",
 			 "%d", &val) < 0)
 		val = 0;
-	vif->csum = !val;
+	vif->ip_csum = !val;
+
+	if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-ipv6-csum-offload",
+			 "%d", &val) < 0)
+		val = 0;
+	vif->ipv6_csum = !!val;
 
 	/* Map the shared frame, irq etc. */
 	err = xenvif_connect(vif, tx_ring_ref, rx_ring_ref,

include/xen/interface/io/netif.h

@@ -50,6 +50,13 @@
  * node as before.
  */
 
+/*
+ * "feature-no-csum-offload" should be used to turn IPv4 TCP/UDP checksum
+ * offload off or on. If it is missing then the feature is assumed to be on.
+ * "feature-ipv6-csum-offload" should be used to turn IPv6 TCP/UDP checksum
+ * offload on or off. If it is missing then the feature is assumed to be off.
+ */
+
 /*
  * This is the 'wire' format for packets:
  *  Request 1: xen_netif_tx_request  -- XEN_NETTXF_* (any flags)