dt-bindings: mfd: Use full path to other schemas

When referencing other schema, it is preferred to use an absolute path
(/schemas/....), which allows also an seamless move of particular schema
out of Linux kernel to dtschema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20240503072116.12430-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Lee Jones <lee@kernel.org>

Documentation/devicetree/bindings/mfd/actions,atc260x.yaml

@@ -21,7 +21,7 @@ description: |
   regulators.
 
 allOf:
-  - $ref: ../input/input.yaml
+  - $ref: /schemas/input/input.yaml
 
 properties:
   compatible:
@@ -57,7 +57,7 @@ properties:
 
       switchldo1:
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true
@@ -76,7 +76,7 @@ properties:
 
       "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true

Documentation/devicetree/bindings/mfd/brcm,cru.yaml

@@ -34,19 +34,19 @@ properties:
 
 patternProperties:
   '^clock-controller@[a-f0-9]+$':
-    $ref: ../clock/brcm,iproc-clocks.yaml
+    $ref: /schemas/clock/brcm,iproc-clocks.yaml
 
   '^phy@[a-f0-9]+$':
-    $ref: ../phy/bcm-ns-usb2-phy.yaml
+    $ref: /schemas/phy/bcm-ns-usb2-phy.yaml
 
   '^pinctrl@[a-f0-9]+$':
-    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+    $ref: /schemas/pinctrl/brcm,ns-pinmux.yaml
 
   '^syscon@[a-f0-9]+$':
     $ref: syscon.yaml
 
   '^thermal@[a-f0-9]+$':
-    $ref: ../thermal/brcm,ns-thermal.yaml
+    $ref: /schemas/thermal/brcm,ns-thermal.yaml
 
 additionalProperties: false
 

Documentation/devicetree/bindings/mfd/brcm,misc.yaml

@@ -33,7 +33,7 @@ properties:
 
 patternProperties:
   '^reset-controller@[a-f0-9]+$':
-    $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml
+    $ref: /schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml
 
 additionalProperties: false
 

Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml

@@ -36,7 +36,7 @@ properties:
   clock-controller:
     # Child node
     type: object
-    $ref: ../clock/canaan,k210-clk.yaml
+    $ref: /schemas/clock/canaan,k210-clk.yaml
     description:
       Clock controller for the SoC clocks. This child node definition
       should follow the bindings specified in
@@ -45,7 +45,7 @@ properties:
   reset-controller:
     # Child node
     type: object
-    $ref: ../reset/canaan,k210-rst.yaml
+    $ref: /schemas/reset/canaan,k210-rst.yaml
     description:
       Reset controller for the SoC. This child node definition
       should follow the bindings specified in
@@ -54,7 +54,7 @@ properties:
   syscon-reboot:
     # Child node
     type: object
-    $ref: ../power/reset/syscon-reboot.yaml
+    $ref: /schemas/power/reset/syscon-reboot.yaml
     description:
       Reboot method for the SoC. This child node definition
       should follow the bindings specified in

Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml

@@ -42,10 +42,10 @@ required:
 
 patternProperties:
   "^gpio(@[0-9a-f]+)?$":
-    $ref: ../gpio/delta,tn48m-gpio.yaml
+    $ref: /schemas/gpio/delta,tn48m-gpio.yaml
 
   "^reset-controller?$":
-    $ref: ../reset/delta,tn48m-reset.yaml
+    $ref: /schemas/reset/delta,tn48m-reset.yaml
 
 additionalProperties: false
 

Documentation/devicetree/bindings/mfd/iqs62x.yaml

@@ -38,10 +38,10 @@ properties:
       device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A).
 
   keys:
-    $ref: ../input/iqs62x-keys.yaml
+    $ref: /schemas/input/iqs62x-keys.yaml
 
   pwm:
-    $ref: ../pwm/iqs620a-pwm.yaml
+    $ref: /schemas/pwm/iqs620a-pwm.yaml
 
 required:
   - compatible

Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml

@@ -39,19 +39,19 @@ properties:
 
 patternProperties:
   "^gpio(@[0-9a-f]+)?$":
-    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+    $ref: /schemas/gpio/kontron,sl28cpld-gpio.yaml
 
   "^hwmon(@[0-9a-f]+)?$":
-    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+    $ref: /schemas/hwmon/kontron,sl28cpld-hwmon.yaml
 
   "^interrupt-controller(@[0-9a-f]+)?$":
-    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+    $ref: /schemas/interrupt-controller/kontron,sl28cpld-intc.yaml
 
   "^pwm(@[0-9a-f]+)?$":
-    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+    $ref: /schemas/pwm/kontron,sl28cpld-pwm.yaml
 
   "^watchdog(@[0-9a-f]+)?$":
-    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+    $ref: /schemas/watchdog/kontron,sl28cpld-wdt.yaml
 
 required:
   - "#address-cells"

Documentation/devicetree/bindings/mfd/max77650.yaml

@@ -53,16 +53,16 @@ properties:
       Single string containing the name of the GPIO line.
 
   regulators:
-    $ref: ../regulator/max77650-regulator.yaml
+    $ref: /schemas/regulator/max77650-regulator.yaml
 
   charger:
-    $ref: ../power/supply/max77650-charger.yaml
+    $ref: /schemas/power/supply/max77650-charger.yaml
 
   leds:
-    $ref: ../leds/leds-max77650.yaml
+    $ref: /schemas/leds/leds-max77650.yaml
 
   onkey:
-    $ref: ../input/max77650-onkey.yaml
+    $ref: /schemas/input/max77650-onkey.yaml
 
 required:
   - compatible

Documentation/devicetree/bindings/mfd/maxim,max77686.yaml

@@ -35,7 +35,7 @@ properties:
     maxItems: 1
 
   voltage-regulators:
-    $ref: ../regulator/maxim,max77686.yaml
+    $ref: /schemas/regulator/maxim,max77686.yaml
     description:
       List of child nodes that specify the regulators.
 

Documentation/devicetree/bindings/mfd/maxim,max77693.yaml

@@ -81,7 +81,7 @@ properties:
       - pwms
 
   regulators:
-    $ref: ../regulator/maxim,max77693.yaml
+    $ref: /schemas/regulator/maxim,max77693.yaml
     description:
       List of child nodes that specify the regulators.
 

Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml

@@ -37,10 +37,10 @@ properties:
     maxItems: 1
 
   regulators:
-    $ref: ../regulator/richtek,rt4831-regulator.yaml
+    $ref: /schemas/regulator/richtek,rt4831-regulator.yaml
 
   backlight:
-    $ref: ../leds/backlight/richtek,rt4831-backlight.yaml
+    $ref: /schemas/leds/backlight/richtek,rt4831-backlight.yaml
 
 required:
   - compatible

Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml

@@ -28,7 +28,7 @@ allOf:
         regulators:
           patternProperties:
             "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$":
-              $ref: ../regulator/regulator.yaml
+              $ref: /schemas/regulator/regulator.yaml
           additionalProperties: false
   - if:
       properties:
@@ -40,7 +40,7 @@ allOf:
         regulators:
           patternProperties:
             "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$":
-              $ref: ../regulator/regulator.yaml
+              $ref: /schemas/regulator/regulator.yaml
           additionalProperties: false
   - if:
       properties:
@@ -52,7 +52,7 @@ allOf:
         regulators:
           patternProperties:
             "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$":
-              $ref: ../regulator/regulator.yaml
+              $ref: /schemas/regulator/regulator.yaml
           additionalProperties: false
 
 properties:

Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml

@@ -82,7 +82,7 @@ properties:
     patternProperties:
       "^(DCDC_REG[1-4]|LDO_REG[1-3])$":
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
     unevaluatedProperties: false
 

Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml

@@ -109,7 +109,7 @@ properties:
     patternProperties:
       "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$":
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
     unevaluatedProperties: false
 

Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml

@@ -91,7 +91,7 @@ properties:
       "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
         type: object
         unevaluatedProperties: false
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
     unevaluatedProperties: false
 
   clocks:

Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml

@@ -101,7 +101,7 @@ properties:
     patternProperties:
       "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$":
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
     unevaluatedProperties: false
 

Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml

@@ -61,7 +61,7 @@ properties:
     default: 30000000
 
   regulators:
-    $ref: ../regulator/rohm,bd71815-regulator.yaml
+    $ref: /schemas/regulator/rohm,bd71815-regulator.yaml
     description:
       List of child nodes that specify the regulators.
 

Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml

@@ -65,12 +65,12 @@ properties:
       here in Ohms.
 
   regulators:
-    $ref: ../regulator/rohm,bd71828-regulator.yaml
+    $ref: /schemas/regulator/rohm,bd71828-regulator.yaml
     description:
       List of child nodes that specify the regulators.
 
   leds:
-    $ref: ../leds/rohm,bd71828-leds.yaml
+    $ref: /schemas/leds/rohm,bd71828-leds.yaml
 
   gpio-reserved-ranges:
     description: |

Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml

@@ -109,7 +109,7 @@ properties:
       - 14000
 
   regulators:
-    $ref: ../regulator/rohm,bd71837-regulator.yaml
+    $ref: /schemas/regulator/rohm,bd71837-regulator.yaml
     description:
       List of child nodes that specify the regulators.
 

Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml

@@ -67,7 +67,7 @@ properties:
     patternProperties:
       "^(vd09|vd18|vd25|vd33|dvfs)$":
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
 
         properties:
           regulator-name:

Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml

@@ -71,7 +71,7 @@ properties:
       # (HW) minimum for max timeout is 4ms, maximum 4416 ms.
 
   regulators:
-    $ref: ../regulator/rohm,bd9576-regulator.yaml
+    $ref: /schemas/regulator/rohm,bd9576-regulator.yaml
     description:
       List of child nodes that specify the regulators.
 

Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml

@@ -27,7 +27,7 @@ properties:
     maxItems: 1
 
   regulators:
-    $ref: ../regulator/samsung,s2mpa01.yaml
+    $ref: /schemas/regulator/samsung,s2mpa01.yaml
     description:
       List of child nodes that specify the regulators.
 

Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml

@@ -27,7 +27,7 @@ properties:
       - samsung,s2mpu02-pmic
 
   clocks:
-    $ref: ../clock/samsung,s2mps11.yaml
+    $ref: /schemas/clock/samsung,s2mps11.yaml
     description:
       Child node describing clock provider.
 
@@ -75,7 +75,7 @@ allOf:
     then:
       properties:
         regulators:
-          $ref: ../regulator/samsung,s2mps11.yaml
+          $ref: /schemas/regulator/samsung,s2mps11.yaml
         samsung,s2mps11-wrstbi-ground: false
 
   - if:
@@ -86,7 +86,7 @@ allOf:
     then:
       properties:
         regulators:
-          $ref: ../regulator/samsung,s2mps13.yaml
+          $ref: /schemas/regulator/samsung,s2mps13.yaml
         samsung,s2mps11-acokb-ground: false
 
   - if:
@@ -97,7 +97,7 @@ allOf:
     then:
       properties:
         regulators:
-          $ref: ../regulator/samsung,s2mps14.yaml
+          $ref: /schemas/regulator/samsung,s2mps14.yaml
         samsung,s2mps11-acokb-ground: false
         samsung,s2mps11-wrstbi-ground: false
 
@@ -109,7 +109,7 @@ allOf:
     then:
       properties:
         regulators:
-          $ref: ../regulator/samsung,s2mps15.yaml
+          $ref: /schemas/regulator/samsung,s2mps15.yaml
         samsung,s2mps11-acokb-ground: false
         samsung,s2mps11-wrstbi-ground: false
 
@@ -121,7 +121,7 @@ allOf:
     then:
       properties:
         regulators:
-          $ref: ../regulator/samsung,s2mpu02.yaml
+          $ref: /schemas/regulator/samsung,s2mpu02.yaml
         samsung,s2mps11-acokb-ground: false
         samsung,s2mps11-wrstbi-ground: false
 

Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml

@@ -21,7 +21,7 @@ properties:
     const: samsung,s5m8767-pmic
 
   clocks:
-    $ref: ../clock/samsung,s2mps11.yaml
+    $ref: /schemas/clock/samsung,s2mps11.yaml
     description:
       Child node describing clock provider.
 
@@ -32,7 +32,7 @@ properties:
     maxItems: 1
 
   regulators:
-    $ref: ../regulator/samsung,s5m8767.yaml
+    $ref: /schemas/regulator/samsung,s5m8767.yaml
     description:
       List of child nodes that specify the regulators.
 

Documentation/devicetree/bindings/mfd/st,stmfx.yaml

@@ -60,7 +60,7 @@ properties:
         additionalProperties: false
 
         allOf:
-          - $ref: ../pinctrl/pinmux-node.yaml
+          - $ref: /schemas/pinctrl/pinmux-node.yaml
 
         properties:
           pins: true

Documentation/devicetree/bindings/mfd/st,stpmic1.yaml

@@ -29,7 +29,7 @@ properties:
   onkey:
     type: object
 
-    $ref: ../input/input.yaml
+    $ref: /schemas/input/input.yaml
 
     properties:
       compatible:
@@ -67,7 +67,7 @@ properties:
   watchdog:
     type: object
 
-    $ref: ../watchdog/watchdog.yaml
+    $ref: /schemas/watchdog/watchdog.yaml
 
     properties:
       compatible:

Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml

@@ -126,7 +126,7 @@ properties:
     patternProperties:
       "^channel@[0-9a-f]+$":
         type: object
-        $ref: ../iio/adc/adc.yaml#
+        $ref: /schemas/iio/adc/adc.yaml#
         description: Represents each of the external channels which are
           connected to the ADC.
 
@@ -180,22 +180,22 @@ properties:
   ab8500_fg:
     description: Node describing the AB8500 fuel gauge control block.
     type: object
-    $ref: ../power/supply/stericsson,ab8500-fg.yaml
+    $ref: /schemas/power/supply/stericsson,ab8500-fg.yaml
 
   ab8500_btemp:
     description: Node describing the AB8500 battery temperature control block.
     type: object
-    $ref: ../power/supply/stericsson,ab8500-btemp.yaml
+    $ref: /schemas/power/supply/stericsson,ab8500-btemp.yaml
 
   ab8500_charger:
     description: Node describing the AB8500 battery charger control block.
     type: object
-    $ref: ../power/supply/stericsson,ab8500-charger.yaml
+    $ref: /schemas/power/supply/stericsson,ab8500-charger.yaml
 
   ab8500_chargalg:
     description: Node describing the AB8500 battery charger algorithm.
     type: object
-    $ref: ../power/supply/stericsson,ab8500-chargalg.yaml
+    $ref: /schemas/power/supply/stericsson,ab8500-chargalg.yaml
 
   phy:
     description: Node describing the AB8500 USB PHY control block.
@@ -339,40 +339,40 @@ properties:
       ab8500_ldo_aux1:
         description: The voltage for the auxiliary LDO regulator 1
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_aux2:
         description: The voltage for the auxiliary LDO regulator 2
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_aux3:
         description: The voltage for the auxiliary LDO regulator 3
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_aux4:
         description: The voltage for the auxiliary LDO regulator 4
           only present on AB8505
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_aux5:
         description: The voltage for the auxiliary LDO regulator 5
           only present on AB8505
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_aux6:
         description: The voltage for the auxiliary LDO regulator 6
           only present on AB8505
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       # There is never any AUX7 regulator which is confusing
@@ -381,21 +381,21 @@ properties:
         description: The voltage for the auxiliary LDO regulator 8
           only present on AB8505
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_intcore:
         description: The LDO regulator for the internal core voltage
           of the AB8500
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_adc:
         description: Analog power regulator for the analog to digital converter
           ADC, only present on AB8505
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_tvout:
@@ -404,39 +404,39 @@ properties:
           the temperature of the NTC thermistor on the battery.
           Only present on AB8500.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_audio:
         description: The LDO regulator for the audio codec output
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_anamic1:
         description: The LDO regulator for the analog microphone 1
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_anamic2:
         description: The LDO regulator for the analog microphone 2
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_dmic:
         description: The LDO regulator for the digital microphone
           only present on AB8500
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ldo_ana:
         description: Analog power regulator for CSI and DSI interfaces,
           Camera Serial Interface CSI and Display Serial Interface DSI.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
     required:
@@ -459,19 +459,19 @@ properties:
       ab8500_ext1:
         description: The voltage for the VSMPS1 external regulator
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ext2:
         description: The voltage for the VSMPS2 external regulator
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       ab8500_ext3:
         description: The voltage for the VSMPS3 external regulator
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
     required:
@@ -482,7 +482,7 @@ properties:
 patternProperties:
   "^pwm@[1-9]+?$":
     type: object
-    $ref: ../pwm/pwm.yaml#
+    $ref: /schemas/pwm/pwm.yaml#
     unevaluatedProperties: false
     description: Represents each of the PWM blocks in the AB8500
 

Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml

@@ -71,52 +71,52 @@ properties:
         description: The voltage for the application processor, the
           main voltage domain for the chip.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_varm:
         description: The voltage for the ARM Cortex-A9 CPU.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vmodem:
         description: The voltage for the modem subsystem.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vpll:
         description: The voltage for the phase locked loop clocks.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vsmps1:
         description: Also known as VIO12, is a step-down voltage regulator
           for 1.2V I/O. SMPS means System Management Power Source.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vsmps2:
         description: Also known as VIO18, is a step-down voltage regulator
           for 1.8V I/O. SMPS means System Management Power Source.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vsmps3:
         description: This is a step-down voltage regulator
           for 0.87 thru 1.875V I/O. SMPS means System Management Power Source.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_vrf1:
         description: RF transceiver voltage regulator.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sva_mmdsp:
@@ -124,21 +124,21 @@ properties:
           voltage regulator. This is the voltage for the accelerator DSP
           for video encoding and decoding.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sva_mmdsp_ret:
         description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
           voltage regulator for retention mode.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sva_pipe:
         description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
           voltage regulator for the data pipe.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sia_mmdsp:
@@ -146,21 +146,21 @@ properties:
           voltage regulator. This is the voltage for the accelerator DSP
           for image encoding and decoding.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sia_mmdsp_ret:
         description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
           voltage regulator for retention mode.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sia_pipe:
         description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
           voltage regulator for the data pipe.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_sga:
@@ -168,7 +168,7 @@ properties:
           This is in effect controlling the power to the MALI400 3D
           accelerator block.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_b2r2_mcde:
@@ -176,33 +176,33 @@ properties:
           Display Engine (MCDE) voltage regulator. These are two graphics
           blocks.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_esram12:
         description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_esram12_ret:
         description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for
           retention mode.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_esram34:
         description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
       db8500_esram34_ret:
         description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for
           retention mode.
         type: object
-        $ref: ../regulator/regulator.yaml#
+        $ref: /schemas/regulator/regulator.yaml#
         unevaluatedProperties: false
 
     required:

Documentation/devicetree/bindings/mfd/ti,tps65086.yaml

@@ -49,7 +49,7 @@ properties:
     patternProperties:
       "^buck[1-6]$":
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true
@@ -72,7 +72,7 @@ properties:
 
       "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true