Commit 14d9cb5f authored by Chandra Seetharaman's avatar Chandra Seetharaman Committed by James Bottomley

[SCSI] scsi_dh: Provide set_params interface in emc device handler

Handle the parameters provided by user thru multipath.

This handler expects only 2 parameters and their value can either be 0 or 1.

This code originates from the old dm-emc.c file. Appropriate changes have
been made to make it work in the new design.
Reported-by: default avatarEddie Williams <Eddie.Williams@steeleye.com>
Signed-off-by: default avatarChandra Seetharaman <sekharan@us.ibm.com>
Tested-by: default avatarEddie Williams <Eddie.Williams@steeleye.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent 18ee70c9
...@@ -561,6 +561,61 @@ static int clariion_activate(struct scsi_device *sdev) ...@@ -561,6 +561,61 @@ static int clariion_activate(struct scsi_device *sdev)
return result; return result;
} }
/*
* params - parameters in the following format
* "no_of_params\0param1\0param2\0param3\0...\0"
* for example, string for 2 parameters with value 10 and 21
* is specified as "2\010\021\0".
*/
static int clariion_set_params(struct scsi_device *sdev, const char *params)
{
struct clariion_dh_data *csdev = get_clariion_data(sdev);
unsigned int hr = 0, st = 0, argc;
const char *p = params;
int result = SCSI_DH_OK;
if ((sscanf(params, "%u", &argc) != 1) || (argc != 2))
return -EINVAL;
while (*p++)
;
if ((sscanf(p, "%u", &st) != 1) || (st > 1))
return -EINVAL;
while (*p++)
;
if ((sscanf(p, "%u", &hr) != 1) || (hr > 1))
return -EINVAL;
if (st)
csdev->flags |= CLARIION_SHORT_TRESPASS;
else
csdev->flags &= ~CLARIION_SHORT_TRESPASS;
if (hr)
csdev->flags |= CLARIION_HONOR_RESERVATIONS;
else
csdev->flags &= ~CLARIION_HONOR_RESERVATIONS;
/*
* If this path is owned, we have to send a trespass command
* with the new parameters. If not, simply return. Next trespass
* command would use the parameters.
*/
if (csdev->lun_state != CLARIION_LUN_OWNED)
goto done;
csdev->lun_state = CLARIION_LUN_UNINITIALIZED;
result = send_trespass_cmd(sdev, csdev);
if (result != SCSI_DH_OK)
goto done;
/* Update status */
result = clariion_send_inquiry(sdev, csdev);
done:
return result;
}
static const struct scsi_dh_devlist clariion_dev_list[] = { static const struct scsi_dh_devlist clariion_dev_list[] = {
{"DGC", "RAID"}, {"DGC", "RAID"},
...@@ -581,11 +636,9 @@ static struct scsi_device_handler clariion_dh = { ...@@ -581,11 +636,9 @@ static struct scsi_device_handler clariion_dh = {
.check_sense = clariion_check_sense, .check_sense = clariion_check_sense,
.activate = clariion_activate, .activate = clariion_activate,
.prep_fn = clariion_prep_fn, .prep_fn = clariion_prep_fn,
.set_params = clariion_set_params,
}; };
/*
* TODO: need some interface so we can set trespass values
*/
static int clariion_bus_attach(struct scsi_device *sdev) static int clariion_bus_attach(struct scsi_device *sdev)
{ {
struct scsi_dh_data *scsi_dh_data; struct scsi_dh_data *scsi_dh_data;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment