Commit 150b6add authored by Biao Huang's avatar Biao Huang Committed by David S. Miller

net: dt-bindings: dwmac: Convert mediatek-dwmac to DT schema

Convert mediatek-dwmac to DT schema, and delete old mediatek-dwmac.txt.
And there are some changes in .yaml than .txt, others almost keep the same:
  1. compatible "const: snps,dwmac-4.20".
  2. delete "snps,reset-active-low;" in example, since driver remove this
     property long ago.
  3. add "snps,reset-delay-us = <0 10000 10000>" in example.
  4. the example is for rgmii interface, keep related properties only.
Signed-off-by: default avatarBiao Huang <biao.huang@mediatek.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 79e11778
MediaTek DWMAC glue layer controller
This file documents platform glue layer for stmmac.
Please see stmmac.txt for the other unchanged properties.
The device node has following properties.
Required properties:
- compatible: Should be "mediatek,mt2712-gmac" for MT2712 SoC
- reg: Address and length of the register set for the device
- interrupts: Should contain the MAC interrupts
- interrupt-names: Should contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
Should be "macirq" for the main MAC IRQ
- clocks: Must contain a phandle for each entry in clock-names.
- clock-names: The name of the clock listed in the clocks property. These are
"axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC.
- mac-address: See ethernet.txt in the same directory
- phy-mode: See ethernet.txt in the same directory
- mediatek,pericfg: A phandle to the syscon node that control ethernet
interface and timing delay.
Optional properties:
- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
It should be defined for RGMII/MII interface.
It should be defined for RMII interface when the reference clock is from MT2712 SoC.
- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
It should be defined for RGMII/MII interface.
It should be defined for RMII interface.
Both delay properties need to be a multiple of 170 for RGMII interface,
or will round down. Range 0~31*170.
Both delay properties need to be a multiple of 550 for MII/RMII interface,
or will round down. Range 0~31*550.
- mediatek,rmii-rxc: boolean property, if present indicates that the RMII
reference clock, which is from external PHYs, is connected to RXC pin
on MT2712 SoC.
Otherwise, is connected to TXC pin.
- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
- mediatek,txc-inverse: boolean property, if present indicates that
1. tx clock will be inversed in MII/RGMII case,
2. tx clock inside MAC will be inversed relative to reference clock
which is from external PHYs in RMII case, and it rarely happen.
3. the reference clock, which outputs to TXC pin will be inversed in RMII case
when the reference clock is from MT2712 SoC.
- mediatek,rxc-inverse: boolean property, if present indicates that
1. rx clock will be inversed in MII/RGMII case.
2. reference clock will be inversed when arrived at MAC in RMII case, when
the reference clock is from external PHYs.
3. the inside clock, which be sent to MAC, will be inversed in RMII case when
the reference clock is from MT2712 SoC.
- assigned-clocks: mac_main and ptp_ref clocks
- assigned-clock-parents: parent clocks of the assigned clocks
Example:
eth: ethernet@1101c000 {
compatible = "mediatek,mt2712-gmac";
reg = <0 0x1101c000 0 0x1300>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "macirq";
phy-mode ="rgmii-rxid";
mac-address = [00 55 7b b5 7d f7];
clock-names = "axi",
"apb",
"mac_main",
"ptp_ref",
"rmii_internal";
clocks = <&pericfg CLK_PERI_GMAC>,
<&pericfg CLK_PERI_GMAC_PCLK>,
<&topckgen CLK_TOP_ETHER_125M_SEL>,
<&topckgen CLK_TOP_ETHER_50M_SEL>,
<&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
<&topckgen CLK_TOP_ETHER_50M_SEL>,
<&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
<&topckgen CLK_TOP_APLL1_D3>,
<&topckgen CLK_TOP_ETHERPLL_50M>;
power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
mediatek,pericfg = <&pericfg>;
mediatek,tx-delay-ps = <1530>;
mediatek,rx-delay-ps = <1530>;
mediatek,rmii-rxc;
mediatek,txc-inverse;
mediatek,rxc-inverse;
snps,txpbl = <1>;
snps,rxpbl = <1>;
snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek DWMAC glue layer controller
maintainers:
- Biao Huang <biao.huang@mediatek.com>
description:
This file documents platform glue layer for stmmac.
# We need a select here so we don't match all nodes with 'snps,dwmac'
select:
properties:
compatible:
contains:
enum:
- mediatek,mt2712-gmac
required:
- compatible
allOf:
- $ref: "snps,dwmac.yaml#"
properties:
compatible:
items:
- enum:
- mediatek,mt2712-gmac
- const: snps,dwmac-4.20a
clocks:
items:
- description: AXI clock
- description: APB clock
- description: MAC Main clock
- description: PTP clock
- description: RMII reference clock provided by MAC
clock-names:
items:
- const: axi
- const: apb
- const: mac_main
- const: ptp_ref
- const: rmii_internal
mediatek,pericfg:
$ref: /schemas/types.yaml#/definitions/phandle
description:
The phandle to the syscon node that control ethernet
interface and timing delay.
mediatek,tx-delay-ps:
description:
The internal TX clock delay (provided by this driver) in nanoseconds.
For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
or will round down. Range 0~31*170.
For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
or will round down. Range 0~31*550.
mediatek,rx-delay-ps:
description:
The internal RX clock delay (provided by this driver) in nanoseconds.
For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
or will round down. Range 0~31*170.
For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
or will round down. Range 0~31*550.
mediatek,rmii-rxc:
type: boolean
description:
If present, indicates that the RMII reference clock, which is from external
PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
mediatek,rmii-clk-from-mac:
type: boolean
description:
If present, indicates that MAC provides the RMII reference clock, which
outputs to TXC pin only.
mediatek,txc-inverse:
type: boolean
description:
If present, indicates that
1. tx clock will be inversed in MII/RGMII case,
2. tx clock inside MAC will be inversed relative to reference clock
which is from external PHYs in RMII case, and it rarely happen.
3. the reference clock, which outputs to TXC pin will be inversed in RMII case
when the reference clock is from MAC.
mediatek,rxc-inverse:
type: boolean
description:
If present, indicates that
1. rx clock will be inversed in MII/RGMII case.
2. reference clock will be inversed when arrived at MAC in RMII case, when
the reference clock is from external PHYs.
3. the inside clock, which be sent to MAC, will be inversed in RMII case when
the reference clock is from MAC.
required:
- compatible
- reg
- interrupts
- interrupt-names
- clocks
- clock-names
- phy-mode
- mediatek,pericfg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/mt2712-clk.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/power/mt2712-power.h>
eth: ethernet@1101c000 {
compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
reg = <0x1101c000 0x1300>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "macirq";
phy-mode ="rgmii-rxid";
mac-address = [00 55 7b b5 7d f7];
clock-names = "axi",
"apb",
"mac_main",
"ptp_ref",
"rmii_internal";
clocks = <&pericfg CLK_PERI_GMAC>,
<&pericfg CLK_PERI_GMAC_PCLK>,
<&topckgen CLK_TOP_ETHER_125M_SEL>,
<&topckgen CLK_TOP_ETHER_50M_SEL>,
<&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
<&topckgen CLK_TOP_ETHER_50M_SEL>,
<&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
<&topckgen CLK_TOP_APLL1_D3>,
<&topckgen CLK_TOP_ETHERPLL_50M>;
power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
mediatek,pericfg = <&pericfg>;
mediatek,tx-delay-ps = <1530>;
snps,txpbl = <1>;
snps,rxpbl = <1>;
snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
snps,reset-delays-us = <0 10000 10000>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment