Revert "brcmfmac: use ISO3166 country code and 0 rev as fallback"

This reverts commit b0b524f0.

Commit b0b524f0 ("brcmfmac: use ISO3166 country code and 0 rev
as fallback") changes country setup to directly use ISO3166 country
codes if no more specific code is configured. This was done under
the assumption that brcmfmac firmwares can handle such simple
direct mapping from country codes to firmware ccode values.

Unfortunately this is not true for all chipset/firmware combinations.
E.g. BCM4359/9 devices stop working as access point with this change,
so revert the offending commit to avoid the regression.
Signed-off-by: Soeren Moch <smoch@web.de>
Cc: stable@vger.kernel.org  # 5.14.x
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210926201905.211605-1-smoch@web.de

drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c

@@ -7463,23 +7463,18 @@ static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
 	s32 found_index;
 	int i;
 
+	country_codes = drvr->settings->country_codes;
+	if (!country_codes) {
+		brcmf_dbg(TRACE, "No country codes configured for device\n");
+		return -EINVAL;
+	}
+
 	if ((alpha2[0] == ccreq->country_abbrev[0]) &&
 	    (alpha2[1] == ccreq->country_abbrev[1])) {
 		brcmf_dbg(TRACE, "Country code already set\n");
 		return -EAGAIN;
 	}
 
-	country_codes = drvr->settings->country_codes;
-	if (!country_codes) {
-		brcmf_dbg(TRACE, "No country codes configured for device, using ISO3166 code and 0 rev\n");
-		memset(ccreq, 0, sizeof(*ccreq));
-		ccreq->country_abbrev[0] = alpha2[0];
-		ccreq->country_abbrev[1] = alpha2[1];
-		ccreq->ccode[0] = alpha2[0];
-		ccreq->ccode[1] = alpha2[1];
-		return 0;
-	}
-
 	found_index = -1;
 	for (i = 0; i < country_codes->table_size; i++) {
 		cc = &country_codes->table[i];