Merge branch 'arm64-fixes-for-6.3' into arm64-for-6.4

Merge the arm64-fixes-for-6.3 branch to avoid merge conflicts with
changes for v6.4.

arch/arm64/boot/dts/qcom/ipq8074-hk01.dts

@@ -62,11 +62,11 @@ &pcie1 {
 	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
-&pcie_phy0 {
+&pcie_qmp0 {
 	status = "okay";
 };
 
-&pcie_phy1 {
+&pcie_qmp1 {
 	status = "okay";
 };
 

arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi

@@ -48,11 +48,11 @@ &pcie1 {
 	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 };
 
-&pcie_phy0 {
+&pcie_qmp0 {
 	status = "okay";
 };
 
-&pcie_phy1 {
+&pcie_qmp1 {
 	status = "okay";
 };
 

arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts

@@ -33,7 +33,3 @@ &button_default {
 &gpio_leds_default {
 	pins = "gpio81", "gpio82", "gpio83";
 };
-
-&sim_ctrl_default {
-	pins = "gpio1", "gpio2";
-};

arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts

@@ -25,6 +25,11 @@ &led_b {
 	gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
 };
 
+&mpss {
+	pinctrl-0 = <&sim_ctrl_default>;
+	pinctrl-names = "default";
+};
+
 &button_default {
 	pins = "gpio37";
 	bias-pull-down;
@@ -34,6 +39,25 @@ &gpio_leds_default {
 	pins = "gpio20", "gpio21", "gpio22";
 };
 
-&sim_ctrl_default {
-	pins = "gpio1", "gpio2";
+/* This selects the external SIM card slot by default */
+&msmgpio {
+	sim_ctrl_default: sim-ctrl-default-state {
+		esim-sel-pins {
+			pins = "gpio0", "gpio3";
+			bias-disable;
+			output-low;
+		};
+
+		sim-en-pins {
+			pins = "gpio1";
+			bias-disable;
+			output-low;
+		};
+
+		sim-sel-pins {
+			pins = "gpio2";
+			bias-disable;
+			output-high;
+		};
+	};
 };

arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi

@@ -92,9 +92,6 @@ &gcc {
 };
 
 &mpss {
-	pinctrl-0 = <&sim_ctrl_default>;
-	pinctrl-names = "default";
-
 	status = "okay";
 };
 
@@ -240,11 +237,4 @@ gpio_leds_default: gpio-leds-default-state {
 		drive-strength = <2>;
 		bias-disable;
 	};
-
-	sim_ctrl_default: sim-ctrl-default-state {
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
-	};
 };

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

@@ -1012,7 +1012,7 @@ &swr0 {
 	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
-		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrLeft";
 		#sound-dai-cells = <0>;
@@ -1021,7 +1021,7 @@ left_spkr: speaker@0,3 {
 	right_spkr: speaker@0,4 {
 		compatible = "sdw10217211000";
 		reg = <0 4>;
-		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrRight";
 		#sound-dai-cells = <0>;

arch/arm64/boot/dts/qcom/sa8540p-ride.dts

@@ -241,7 +241,7 @@ &qup2 {
 };
 
 &remoteproc_nsp0 {
-	firmware-name = "qcom/sa8540p/cdsp.mbn";
+	firmware-name = "qcom/sa8540p/cdsp0.mbn";
 	status = "okay";
 };
 

arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -2138,6 +2138,8 @@ pcie1: pci@1c08000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_clkreq_n>;
 
+			dma-coherent;
+
 			iommus = <&apps_smmu 0x1c80 0x1>;
 
 			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,

arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts

@@ -374,6 +374,7 @@ vreg_s10b: smps10 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_s11b: smps11 {
@@ -381,6 +382,7 @@ vreg_s11b: smps11 {
 			regulator-min-microvolt = <1272000>;
 			regulator-max-microvolt = <1272000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_s12b: smps12 {
@@ -388,6 +390,7 @@ vreg_s12b: smps12 {
 			regulator-min-microvolt = <984000>;
 			regulator-max-microvolt = <984000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
 		};
 
 		vreg_l3b: ldo3 {
@@ -459,6 +462,7 @@ vreg_bob: bob {
 			regulator-min-microvolt = <3008000>;
 			regulator-max-microvolt = <3960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
 		};
 	};
 
@@ -820,75 +824,88 @@ &pmk8280_vadc {
 	pmic-die-temp@3 {
 		reg = <PMK8350_ADC7_DIE_TEMP>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_die_temp";
 	};
 
 	xo-therm@44 {
 		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "pmk8350_xo_therm";
 	};
 
 	pmic-die-temp@103 {
 		reg = <PM8350_ADC7_DIE_TEMP(1)>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_1_die_temp";
 	};
 
 	sys-therm@144 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm1";
 	};
 
 	sys-therm@145 {
 		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm2";
 	};
 
 	sys-therm@146 {
 		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm3";
 	};
 
 	sys-therm@147 {
 		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm4";
 	};
 
 	pmic-die-temp@303 {
 		reg = <PM8350_ADC7_DIE_TEMP(3)>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_2_die_temp";
 	};
 
 	sys-therm@344 {
 		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm5";
 	};
 
 	sys-therm@345 {
 		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm6";
 	};
 
 	sys-therm@346 {
 		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm7";
 	};
 
 	sys-therm@347 {
 		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
 		qcom,hw-settle-time = <200>;
 		qcom,ratiometric;
+		label = "sys_therm8";
 	};
 
 	pmic-die-temp@403 {
 		reg = <PMR735A_ADC7_DIE_TEMP>;
 		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_die_temp";
 	};
 };
 
@@ -932,9 +949,9 @@ &sound {
 		"VA DMIC0", "MIC BIAS1",
 		"VA DMIC1", "MIC BIAS1",
 		"VA DMIC2", "MIC BIAS3",
-		"TX DMIC0", "MIC BIAS1",
-		"TX DMIC1", "MIC BIAS2",
-		"TX DMIC2", "MIC BIAS3",
+		"VA DMIC0", "VA MIC BIAS1",
+		"VA DMIC1", "VA MIC BIAS1",
+		"VA DMIC2", "VA MIC BIAS3",
 		"TX SWR_ADC1", "ADC2_OUTPUT";
 
 	wcd-playback-dai-link {
@@ -985,7 +1002,7 @@ platform {
 	va-dai-link {
 		link-name = "VA Capture";
 		cpu {
-			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
 		};
 
 		platform {
@@ -1110,7 +1127,7 @@ &vamacro {
 
 	vdd-micb-supply = <&vreg_s10b>;
 
-	qcom,dmic-sample-rate = <600000>;
+	qcom,dmic-sample-rate = <4800000>;
 
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/sc8280xp.dtsi

@@ -2512,12 +2512,12 @@ swr1: soundwire-controller@3210000 {
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0x00 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0x0f 0xff 0xff>;
 			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
 
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
@@ -2608,7 +2608,7 @@ swr2: soundwire-controller@3330000 {
 					      <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core", "wake";
 
-			clocks = <&vamacro>;
+			clocks = <&txmacro>;
 			clock-names = "iface";
 			label = "TX";
 			#sound-dai-cells = <1>;
@@ -2617,15 +2617,15 @@ swr2: soundwire-controller@3330000 {
 
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
-			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03 0x03>;
-			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x01>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
 			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x01>;
 
 			status = "disabled";
 		};

arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts

@@ -753,7 +753,7 @@ swm: swm@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
-			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -761,7 +761,7 @@ left_spkr: speaker@0,3 {
 
 		right_spkr: speaker@0,4 {
 			compatible = "sdw10217211000";
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
 			reg = <0 4>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";

arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts

@@ -662,7 +662,7 @@ swm: swm@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
-			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -670,7 +670,7 @@ left_spkr: speaker@0,3 {
 
 		right_spkr: speaker@0,4 {
 			compatible = "sdw10217211000";
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
 			reg = <0 4>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";

arch/arm64/boot/dts/qcom/sm6115.dtsi

@@ -1064,6 +1064,7 @@ spi5: spi@4a94000 {
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				status = "disabled";
 			};
 		};
 

arch/arm64/boot/dts/qcom/sm6375.dtsi

@@ -1226,6 +1226,7 @@ remoteproc_cdsp: remoteproc@b000000 {
 			clock-names = "xo";
 
 			power-domains = <&rpmpd SM6375_VDDCX>;
+			power-domain-names = "cx";
 
 			memory-region = <&pil_cdsp_mem>;
 

arch/arm64/boot/dts/qcom/sm8150.dtsi

@@ -1850,7 +1850,7 @@ pcie0: pci@1c00000 {
 				      "slave_q2a",
 				      "tbu";
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
+			iommus = <&apps_smmu 0x1d80 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1949,7 +1949,7 @@ pcie1: pci@1c08000 {
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
+			iommus = <&apps_smmu 0x1e00 0x3f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 

arch/arm64/boot/dts/qcom/sm8250-mtp.dts

@@ -764,7 +764,7 @@ &swr0 {
 	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
-		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrLeft";
 		#sound-dai-cells = <0>;
@@ -773,7 +773,7 @@ left_spkr: speaker@0,3 {
 	right_spkr: speaker@0,4 {
 		compatible = "sdw10217211000";
 		reg = <0 4>;
-		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>;
 		#thermal-sensor-cells = <0>;
 		sound-name-prefix = "SpkrRight";
 		#sound-dai-cells = <0>;

arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts

@@ -625,6 +625,6 @@ &ufs_mem_phy {
 };
 
 &venus {
-	firmware-name = "qcom/sm8250/elish/venus.mbn";
+	firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn";
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/sm8350.dtsi

@@ -1672,6 +1672,7 @@ ufs_mem_hc: ufshc@1d84000 {
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			clock-names =
 				"core_clk",

arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -2128,8 +2128,8 @@ wsa2macro: codec@31e0000 {
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
@@ -4082,6 +4082,7 @@ ufs_mem_hc: ufshc@1d84000 {
 			power-domains = <&gcc UFS_PHY_GDSC>;
 
 			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;

arch/arm64/boot/dts/qcom/sm8550.dtsi

@@ -66,7 +66,7 @@ cpus {
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
@@ -90,7 +90,7 @@ L3_0: l3-cache {
 
 		CPU1: cpu@100 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
@@ -110,7 +110,7 @@ L2_100: l2-cache {
 
 		CPU2: cpu@200 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a510";
 			reg = <0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
@@ -130,7 +130,7 @@ L2_200: l2-cache {
 
 		CPU3: cpu@300 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a715";
 			reg = <0 0x300>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
@@ -150,7 +150,7 @@ L2_300: l2-cache {
 
 		CPU4: cpu@400 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a715";
 			reg = <0 0x400>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
@@ -170,7 +170,7 @@ L2_400: l2-cache {
 
 		CPU5: cpu@500 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a710";
 			reg = <0 0x500>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
@@ -190,7 +190,7 @@ L2_500: l2-cache {
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-a710";
 			reg = <0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
@@ -210,7 +210,7 @@ L2_600: l2-cache {
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "qcom,kryo";
+			compatible = "arm,cortex-x3";
 			reg = <0 0x700>;
 			clocks = <&cpufreq_hw 2>;
 			enable-method = "psci";
@@ -1896,6 +1896,7 @@ ufs_mem_hc: ufs@1d84000 {
 			required-opps = <&rpmhpd_opp_nom>;
 
 			iommus = <&apps_smmu 0x60 0x0>;
+			dma-coherent;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
@@ -1988,7 +1989,7 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 		lpass_tlmm: pinctrl@6e80000 {
 			compatible = "qcom,sm8550-lpass-lpi-pinctrl";
 			reg = <0 0x06e80000 0 0x20000>,
-			      <0 0x0725a000 0 0x10000>;
+			      <0 0x07250000 0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&lpass_tlmm 0 0 23>;
@@ -2704,7 +2705,7 @@ qup_i2c0_data_clk: qup-i2c0-data-clk-state {
 				pins = "gpio28", "gpio29";
 				function = "qup1_se0";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
@@ -2712,7 +2713,7 @@ qup_i2c1_data_clk: qup-i2c1-data-clk-state {
 				pins = "gpio32", "gpio33";
 				function = "qup1_se1";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
@@ -2720,7 +2721,7 @@ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
 				pins = "gpio36", "gpio37";
 				function = "qup1_se2";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
@@ -2728,7 +2729,7 @@ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
 				pins = "gpio40", "gpio41";
 				function = "qup1_se3";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
@@ -2736,7 +2737,7 @@ qup_i2c4_data_clk: qup-i2c4-data-clk-state {
 				pins = "gpio44", "gpio45";
 				function = "qup1_se4";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
@@ -2744,7 +2745,7 @@ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
 				pins = "gpio52", "gpio53";
 				function = "qup1_se5";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
@@ -2752,7 +2753,7 @@ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
 				pins = "gpio48", "gpio49";
 				function = "qup1_se6";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
@@ -2760,14 +2761,14 @@ scl-pins {
 					pins = "gpio57";
 					function = "qup2_se0_l1_mira";
 					drive-strength = <2>;
-					bias-pull-up;
+					bias-pull-up = <2200>;
 				};
 
 				sda-pins {
 					pins = "gpio56";
 					function = "qup2_se0_l0_mira";
 					drive-strength = <2>;
-					bias-pull-up;
+					bias-pull-up = <2200>;
 				};
 			};
 
@@ -2776,7 +2777,7 @@ qup_i2c9_data_clk: qup-i2c9-data-clk-state {
 				pins = "gpio60", "gpio61";
 				function = "qup2_se1";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
@@ -2784,7 +2785,7 @@ qup_i2c10_data_clk: qup-i2c10-data-clk-state {
 				pins = "gpio64", "gpio65";
 				function = "qup2_se2";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
@@ -2792,7 +2793,7 @@ qup_i2c11_data_clk: qup-i2c11-data-clk-state {
 				pins = "gpio68", "gpio69";
 				function = "qup2_se3";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
@@ -2800,7 +2801,7 @@ qup_i2c12_data_clk: qup-i2c12-data-clk-state {
 				pins = "gpio2", "gpio3";
 				function = "qup2_se4";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
@@ -2808,7 +2809,7 @@ qup_i2c13_data_clk: qup-i2c13-data-clk-state {
 				pins = "gpio80", "gpio81";
 				function = "qup2_se5";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
@@ -2816,7 +2817,7 @@ qup_i2c15_data_clk: qup-i2c15-data-clk-state {
 				pins = "gpio72", "gpio106";
 				function = "qup2_se7";
 				drive-strength = <2>;
-				bias-pull-up;
+				bias-pull-up = <2200>;
 			};
 
 			qup_spi0_cs: qup-spi0-cs-state {