iio: health: max30100: do not use internal iio_dev lock

The pattern used in this device does not quite fit in the
iio_device_claim_direct_mode() typical usage. In this case,
iio_buffer_enabled() was being used not to prevent the raw
access but to allow it. Hence, let's make use of the new
iio_device_claim_buffer_mode() API to make sure we stay in
buffered mode during the complete read.

Note that we are shadowing the error code returned by
iio_device_claim_buffer_mode() so that we keep the original one
(-EAGAIN). The reason is that some userspace stack might already be
relying on this particular code so that we are not taking chances and
leave it alone.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221012151620.1725215-3-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/health/max30100.c

@@ -387,18 +387,21 @@ static int max30100_read_raw(struct iio_dev *indio_dev,
 		 * Temperature reading can only be acquired while engine
 		 * is running
 		 */
-		mutex_lock(&indio_dev->mlock);
-
-		if (!iio_buffer_enabled(indio_dev))
+		if (iio_device_claim_buffer_mode(indio_dev)) {
+			/*
+			 * Replacing -EBUSY or other error code
+			 * returned by iio_device_claim_buffer_mode()
+			 * because user space may rely on the current
+			 * one.
+			 */
 			ret = -EAGAIN;
-		else {
+		} else {
 			ret = max30100_get_temp(data, val);
 			if (!ret)
 				ret = IIO_VAL_INT;
 
+			iio_device_release_buffer_mode(indio_dev);
 		}
-
-		mutex_unlock(&indio_dev->mlock);
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		*val = 1;  /* 0.0625 */