Commit 15753b65 authored by John Crispin's avatar John Crispin

MIPS: lantiq: fix bootselect bits on XRX200 SoC

The XRX200 SoC family has a different register layout for reading the boot
selection bits.
Signed-off-by: default avatarJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4519
parent a15d129a
......@@ -34,11 +34,12 @@
/* reset cause */
#define RCU_STAT_SHIFT 26
/* boot selection */
#define RCU_BOOT_SEL_SHIFT 26
#define RCU_BOOT_SEL_MASK 0x7
#define RCU_BOOT_SEL(x) ((x >> 18) & 0x7)
#define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10))
/* remapped base addr of the reset control unit */
static void __iomem *ltq_rcu_membase;
static struct device_node *ltq_rcu_np;
/* This function is used by the watchdog driver */
int ltq_reset_cause(void)
......@@ -52,7 +53,11 @@ EXPORT_SYMBOL_GPL(ltq_reset_cause);
unsigned char ltq_boot_select(void)
{
u32 val = ltq_rcu_r32(RCU_RST_STAT);
return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK;
if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200"))
return RCU_BOOT_SEL_XRX200(val);
return RCU_BOOT_SEL(val);
}
/* reset a io domain for u micro seconds */
......@@ -85,14 +90,17 @@ static void ltq_machine_power_off(void)
static int __init mips_reboot_setup(void)
{
struct resource res;
struct device_node *np =
of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway");
ltq_rcu_np = of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway");
if (!ltq_rcu_np)
ltq_rcu_np = of_find_compatible_node(NULL, NULL,
"lantiq,rcu-xrx200");
/* check if all the reset register range is available */
if (!np)
if (!ltq_rcu_np)
panic("Failed to load reset resources from devicetree");
if (of_address_to_resource(np, 0, &res))
if (of_address_to_resource(ltq_rcu_np, 0, &res))
panic("Failed to get rcu memory range");
if (request_mem_region(res.start, resource_size(&res), res.name) < 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment