Commit 15ade3ca authored by Wey-Yi Guy's avatar Wey-Yi Guy

iwlagn: remove un-needed configuration

After driver split, set_l0s config is no longer needed, remove it
Signed-off-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
parent 6bb64697
......@@ -235,7 +235,6 @@ static struct iwl_base_params iwl1000_base_params = {
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
.set_l0s = true,
.max_ll_items = OTP_MAX_LL_ITEMS_1000,
.shadow_ram_support = false,
.led_compensation = 51,
......
......@@ -343,7 +343,6 @@ static struct iwl_base_params iwl2000_base_params = {
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
.set_l0s = true,
.max_ll_items = OTP_MAX_LL_ITEMS_2x00,
.shadow_ram_support = true,
.led_compensation = 51,
......@@ -366,7 +365,6 @@ static struct iwl_base_params iwl2030_base_params = {
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
.set_l0s = true,
.max_ll_items = OTP_MAX_LL_ITEMS_2x00,
.shadow_ram_support = true,
.led_compensation = 57,
......
......@@ -464,7 +464,6 @@ static struct iwl_base_params iwl5000_base_params = {
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
.set_l0s = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
......
......@@ -432,7 +432,6 @@ static struct iwl_base_params iwl6000_base_params = {
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
.set_l0s = true,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 51,
......@@ -454,7 +453,6 @@ static struct iwl_base_params iwl6050_base_params = {
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
.set_l0s = true,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.led_compensation = 51,
......@@ -475,7 +473,6 @@ static struct iwl_base_params iwl6000_g2_base_params = {
.num_of_queues = IWLAGN_NUM_QUEUES,
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
.pll_cfg_val = 0,
.set_l0s = true,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.led_compensation = 57,
......
......@@ -1061,20 +1061,18 @@ int iwl_apm_init(struct iwl_priv *priv)
* If not (unlikely), enable L0S, so there is at least some
* power savings, even without L1.
*/
if (priv->cfg->base_params->set_l0s) {
lctl = iwl_pcie_link_ctl(priv);
if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
PCI_CFG_LINK_CTRL_VAL_L1_EN) {
/* L1-ASPM enabled; disable(!) L0S */
iwl_set_bit(priv, CSR_GIO_REG,
CSR_GIO_REG_VAL_L0S_ENABLED);
IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n");
} else {
/* L1-ASPM disabled; enable(!) L0S */
iwl_clear_bit(priv, CSR_GIO_REG,
CSR_GIO_REG_VAL_L0S_ENABLED);
IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n");
}
lctl = iwl_pcie_link_ctl(priv);
if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
PCI_CFG_LINK_CTRL_VAL_L1_EN) {
/* L1-ASPM enabled; disable(!) L0S */
iwl_set_bit(priv, CSR_GIO_REG,
CSR_GIO_REG_VAL_L0S_ENABLED);
IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n");
} else {
/* L1-ASPM disabled; enable(!) L0S */
iwl_clear_bit(priv, CSR_GIO_REG,
CSR_GIO_REG_VAL_L0S_ENABLED);
IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n");
}
/* Configure analog phase-lock-loop before activating to D0A */
......
......@@ -265,7 +265,6 @@ struct iwl_base_params {
int num_of_ampdu_queues;/* def: HW dependent */
/* for iwl_apm_init() */
u32 pll_cfg_val;
bool set_l0s;
const u16 max_ll_items;
const bool shadow_ram_support;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment