Merge tag 'samsung-soc-5.19' of...

Merge tag 'samsung-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers

Samsung mach/soc changes for v5.19

Cleanup: drop unneeded CONFIG_S3C24XX_PWM and fix some typos.

* tag 'samsung-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s3c: fix typos in comments
  ARM: s3c: Drop config symbol S3C24XX_PWM

Link: https://lore.kernel.org/r/20220506081438.149192-6-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/configs/mini2440_defconfig

@@ -6,7 +6,6 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_ADC=y
-CONFIG_S3C24XX_PWM=y
 # CONFIG_CPU_S3C2410 is not set
 CONFIG_CPU_S3C2440=y
 CONFIG_MACH_MINI2440=y
@@ -228,6 +227,8 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
 CONFIG_S3C24XX_DMAC=y
+CONFIG_PWM=y
+CONFIG_PWM_SAMSUNG=y
 CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y

arch/arm/configs/s3c2410_defconfig

@@ -358,6 +358,8 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
 CONFIG_S3C24XX_DMAC=y
+CONFIG_PWM=y
+CONFIG_PWM_SAMSUNG=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y

arch/arm/mach-s3c/Kconfig

@@ -207,14 +207,6 @@ config SAMSUNG_DEV_PWM
 	help
 	  Compile in platform device definition for PWM Timer
 
-config S3C24XX_PWM
-	bool "PWM device support"
-	select PWM
-	select PWM_SAMSUNG
-	help
-	  Support for exporting the PWM timer blocks via the pwm device
-	  system
-
 config GPIO_SAMSUNG
 	def_bool y
 

arch/arm/mach-s3c/Kconfig.s3c24xx

@@ -532,7 +532,6 @@ config MACH_NEO1973_GTA02
 	select MFD_PCF50633
 	select PCF50633_GPIO
 	select POWER_SUPPLY
-	select S3C24XX_PWM
 	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
@@ -544,7 +543,6 @@ config MACH_RX1950
 	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
-	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	help
 	   Say Y here if you're using HP iPAQ rx1950

arch/arm/mach-s3c/iotiming-s3c2410.c

@@ -259,7 +259,7 @@ static const unsigned int tacc_tab[] = {
 /**
  * get_tacc - turn tACC value into cycle time
  * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @val: The bank timing register value, shifed down.
+ * @val: The bank timing register value, shifted down.
  */
 static unsigned int get_tacc(unsigned long hclk_tns,
 			     unsigned long val)

arch/arm/mach-s3c/pm-s3c64xx.c

@@ -323,7 +323,7 @@ void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
 
 	/* S3C64XX UART blocks only support level interrupts, so ensure that
 	 * when we restore unused UART blocks we force the level interrupt
-	 * settigs. */
+	 * settings. */
 	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
 
 	/* We have a constraint on changing the clock type of the UART

arch/arm/mach-s3c/s3c24xx.c

@@ -146,7 +146,7 @@ static struct map_desc s3c_iodesc[] __initdata __maybe_unused = {
 	IODESC_ENT(UART)
 };
 
-/* read cpu identificaiton code */
+/* read cpu identification code */
 
 static unsigned long s3c24xx_read_idcode_v5(void)
 {