Commit 163f22dc authored by Claudiu Manoil's avatar Claudiu Manoil Committed by Kumar Gala

powerpc/85xx: Fix sram_offset parameter type

The sram_offset parameter represents a physical address and should be of
type phys_addr_t. As part of this fix, the extraction of sram_params is
being cleaned-up and fixed.

This patch fixes now the case when the offset value of 0xfff00000 was being
rejected by the driver (returning -EINVAL), although this is a valid offset
value.
Signed-off-by: default avatarTang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: default avatarClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent e1bd5d8b
/* /*
* Copyright 2009-2010 Freescale Semiconductor, Inc * Copyright 2009-2010, 2012 Freescale Semiconductor, Inc
* *
* QorIQ based Cache Controller Memory Mapped Registers * QorIQ based Cache Controller Memory Mapped Registers
* *
...@@ -91,7 +91,7 @@ struct mpc85xx_l2ctlr { ...@@ -91,7 +91,7 @@ struct mpc85xx_l2ctlr {
struct sram_parameters { struct sram_parameters {
unsigned int sram_size; unsigned int sram_size;
uint64_t sram_offset; phys_addr_t sram_offset;
}; };
extern int instantiate_cache_sram(struct platform_device *dev, extern int instantiate_cache_sram(struct platform_device *dev,
......
/* /*
* Copyright 2009-2010 Freescale Semiconductor, Inc. * Copyright 2009-2010, 2012 Freescale Semiconductor, Inc.
* *
* QorIQ (P1/P2) L2 controller init for Cache-SRAM instantiation * QorIQ (P1/P2) L2 controller init for Cache-SRAM instantiation
* *
...@@ -31,24 +31,21 @@ static char *sram_size; ...@@ -31,24 +31,21 @@ static char *sram_size;
static char *sram_offset; static char *sram_offset;
struct mpc85xx_l2ctlr __iomem *l2ctlr; struct mpc85xx_l2ctlr __iomem *l2ctlr;
static long get_cache_sram_size(void) static int get_cache_sram_params(struct sram_parameters *sram_params)
{ {
unsigned long val; unsigned long long addr;
unsigned int size;
if (!sram_size || (strict_strtoul(sram_size, 0, &val) < 0)) if (!sram_size || (kstrtouint(sram_size, 0, &size) < 0))
return -EINVAL; return -EINVAL;
return val; if (!sram_offset || (kstrtoull(sram_offset, 0, &addr) < 0))
}
static long get_cache_sram_offset(void)
{
unsigned long val;
if (!sram_offset || (strict_strtoul(sram_offset, 0, &val) < 0))
return -EINVAL; return -EINVAL;
return val; sram_params->sram_offset = addr;
sram_params->sram_size = size;
return 0;
} }
static int __init get_size_from_cmdline(char *str) static int __init get_size_from_cmdline(char *str)
...@@ -93,17 +90,9 @@ static int __devinit mpc85xx_l2ctlr_of_probe(struct platform_device *dev) ...@@ -93,17 +90,9 @@ static int __devinit mpc85xx_l2ctlr_of_probe(struct platform_device *dev)
} }
l2cache_size = *prop; l2cache_size = *prop;
sram_params.sram_size = get_cache_sram_size(); if (get_cache_sram_params(&sram_params)) {
if ((int)sram_params.sram_size <= 0) {
dev_err(&dev->dev,
"Entire L2 as cache, Aborting Cache-SRAM stuff\n");
return -EINVAL;
}
sram_params.sram_offset = get_cache_sram_offset();
if ((int64_t)sram_params.sram_offset <= 0) {
dev_err(&dev->dev, dev_err(&dev->dev,
"Entire L2 as cache, provide a valid sram offset\n"); "Entire L2 as cache, provide valid sram offset and size\n");
return -EINVAL; return -EINVAL;
} }
...@@ -125,14 +114,14 @@ static int __devinit mpc85xx_l2ctlr_of_probe(struct platform_device *dev) ...@@ -125,14 +114,14 @@ static int __devinit mpc85xx_l2ctlr_of_probe(struct platform_device *dev)
* Write bits[0-17] to srbar0 * Write bits[0-17] to srbar0
*/ */
out_be32(&l2ctlr->srbar0, out_be32(&l2ctlr->srbar0,
sram_params.sram_offset & L2SRAM_BAR_MSK_LO18); lower_32_bits(sram_params.sram_offset) & L2SRAM_BAR_MSK_LO18);
/* /*
* Write bits[18-21] to srbare0 * Write bits[18-21] to srbare0
*/ */
#ifdef CONFIG_PHYS_64BIT #ifdef CONFIG_PHYS_64BIT
out_be32(&l2ctlr->srbarea0, out_be32(&l2ctlr->srbarea0,
(sram_params.sram_offset >> 32) & L2SRAM_BARE_MSK_HI4); upper_32_bits(sram_params.sram_offset) & L2SRAM_BARE_MSK_HI4);
#endif #endif
clrsetbits_be32(&l2ctlr->ctl, L2CR_L2E, L2CR_L2FI); clrsetbits_be32(&l2ctlr->ctl, L2CR_L2E, L2CR_L2FI);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment