Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic tree contains three separate changes for linux-5.19:

   - The h8300 architecture is retired after it has been effectively
     unmaintained for a number of years. This is the last architecture
     we supported that has no MMU implementation, but there are still a
     few architectures (arm, m68k, riscv, sh and xtensa) that support
     CPUs with and without an MMU.

   - A series to add a generic ticket spinlock that can be shared by
     most architectures with a working cmpxchg or ll/sc type atomic,
     including the conversion of riscv, csky and openrisc. This series
     is also a prerequisite for the loongarch64 architecture port that
     will come as a separate pull request.

   - A cleanup of some exported uapi header files to ensure they can be
     included from user space without relying on other kernel headers"

* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  h8300: remove stale bindings and symlink
  sparc: add asm/stat.h to UAPI compile-test coverage
  powerpc: add asm/stat.h to UAPI compile-test coverage
  mips: add asm/stat.h to UAPI compile-test coverage
  riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
  kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
  agpgart.h: do not include <stdlib.h> from exported header
  csky: Move to generic ticket-spinlock
  RISC-V: Move to queued RW locks
  RISC-V: Move to generic spinlocks
  openrisc: Move to ticket-spinlock
  asm-generic: qrwlock: Document the spinlock fairness requirements
  asm-generic: qspinlock: Indicate the use of mixed-size atomics
  asm-generic: ticket-lock: New generic ticket-based spinlock
  remove the h8300 architecture

Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt

-* Renesas H8/300 divider clock
-
-Required Properties:
-
-  - compatible: Must be "renesas,h8300-div-clock"
-
-  - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
-  - #clock-cells: Must be 1
-
-  - reg: Base address and length of the divide rate selector
-
-  - renesas,width: bit width of selector
-
-Example
--------
-
-		cclk: cclk {
-			compatible = "renesas,h8300-div-clock";
-			clocks = <&xclk>;
-			#clock-cells = <0>;
-			reg = <0xfee01b 2>;
-			renesas,width = <2>;
-		};

Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt

-Renesas H8S2678 PLL clock
-
-This device is Clock multiplyer
-
-Required Properties:
-
-  - compatible: Must be "renesas,h8s2678-pll-clock"
-
-  - clocks: Reference to the parent clocks
-
-  - #clock-cells: Must be 0
-
-  - reg: Two rate selector (Multiply / Divide) register address
-
-Example
--------
-
-		pllclk: pllclk {
-			compatible = "renesas,h8s2678-pll-clock";
-			clocks = <&xclk>;
-			#clock-cells = <0>;
-			reg = <0xfee03b 2>, <0xfee045 2>;
-		};

Documentation/devicetree/bindings/h8300/cpu.txt

-* H8/300 CPU bindings
-
-Required properties:
-
-- compatible: Compatible property value should be "renesas,h8300".
-- clock-frequency: Contains the clock frequency for CPU, in Hz.
-
-Example:
-
-		cpu@0 {
-			compatible = "renesas,h8300";
-			clock-frequency = <20000000>;
-		};

Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt

-* H8/300H Interrupt controller
-
-Required properties:
-
-- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- regs: Base address of interrupt controller registers.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	h8intc: interrupt-controller@fee012 {
-		compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfee012 7>;
-	};

Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt

-* H8S Interrupt controller
-
-Required properties:
-
-- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- regs: Base address of interrupt controller registers.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	h8intc: interrupt-controller@fffe00 {
-		compatible = "renesas,h8s-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfffe00 24>;
-	};

Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml

-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/memory-controllers/renesas,h8300-bsc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: H8/300 bus controller
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-  - Yoshinori Sato <ysato@users.sourceforge.jp>
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - renesas,h8300h-bsc
-          - renesas,h8s-bsc
-      - const: renesas,h8300-bsc
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  - |
-    memory-controller@fee01e {
-        compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
-        reg = <0xfee01e 8>;
-    };

Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt

-* Renesas H8/300 16bit timer
-
-The 16bit timer is a 16bit timer/counter with configurable clock inputs and
-programmable compare match.
-
-Required Properties:
-
-  - compatible: must contain "renesas,16bit-timer"
-  - reg: base address and length of the registers block for the timer module.
-  - interrupts: interrupt-specifier for the timer, IMIA
-  - clocks: a list of phandle, one for each entry in clock-names.
-  - clock-names: must contain "peripheral_clk" for the functional clock.
-  - renesas,channel: timer channel number.
-
-Example:
-
-	timer16: timer@ffff68 {
-		compatible = "reneas,16bit-timer";
-		reg = <0xffff68 8>, <0xffff60 8>;
-		interrupts = <24>;
-		renesas,channel = <0>;
-		clocks = <&pclk>;
-		clock-names = "peripheral_clk";
-	};
-

Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt

-* Renesas H8/300 8bit timer
-
-The 8bit timer is a 8bit timer/counter with configurable clock inputs and
-programmable compare match.
-
-This implement only supported cascade mode.
-
-Required Properties:
-
-  - compatible: must contain "renesas,8bit-timer"
-  - reg: base address and length of the registers block for the timer module.
-  - interrupts: interrupt-specifier for the timer, CMIA and TOVI
-  - clocks: a list of phandle, one for each entry in clock-names.
-  - clock-names: must contain "fck" for the functional clock.
-
-Example:
-
-	timer8_0: timer@ffff80 {
-		compatible = "renesas,8bit-timer";
-		reg = <0xffff80 10>;
-		interrupts = <36>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-

Documentation/features/core/cBPF-JIT/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: | TODO |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/core/eBPF-JIT/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/core/generic-idle-thread/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: |  ok  |
     |        ia64: |  ok  |
     |        m68k: | TODO |

Documentation/features/core/jump-labels/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/core/thread-info-in-task/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/core/tracehook/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: |  ok  |
     |        ia64: |  ok  |
     |        m68k: | TODO |

Documentation/features/debug/KASAN/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/debug/debug-vm-pgtable/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/debug/gcov-profile-all/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/debug/kcov/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/debug/kgdb/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: |  ok  |
     |     hexagon: |  ok  |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/debug/kmemleak/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/debug/kprobes-on-ftrace/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: | TODO |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/debug/kprobes/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: |  ok  |
     |        m68k: | TODO |

Documentation/features/debug/kretprobes/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: |  ok  |
     |        m68k: | TODO |

Documentation/features/debug/optprobes/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: | TODO |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/debug/stackprotector/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/debug/uprobes/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/debug/user-ret-profiler/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: | TODO |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/io/dma-contiguous/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/locking/cmpxchg-local/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/locking/lockdep/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: |  ok  |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/locking/queued-rwlocks/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/locking/queued-spinlocks/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/perf/kprobes-event/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: |  ok  |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/perf/perf-regs/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/perf/perf-stackdump/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/sched/membarrier-sync-core/arch-support.txt

@@ -34,7 +34,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/sched/numa-balancing/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ..  |
     |       arm64: |  ok  |
     |        csky: |  ..  |
-    |       h8300: |  ..  |
     |     hexagon: |  ..  |
     |        ia64: | TODO |
     |        m68k: |  ..  |

Documentation/features/seccomp/seccomp-filter/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/time/arch-tick-broadcast/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/time/clockevents/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: |  ok  |
     |     hexagon: |  ok  |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/time/context-tracking/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/time/irq-time-acct/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: |  ..  |
     |        m68k: | TODO |

Documentation/features/time/virt-cpuacct/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ok  |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: |  ok  |
     |        m68k: | TODO |

Documentation/features/vm/ELF-ASLR/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/vm/PG_uncached/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: | TODO |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: |  ok  |
     |        m68k: | TODO |

Documentation/features/vm/THP/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: |  ..  |
-    |       h8300: |  ..  |
     |     hexagon: |  ..  |
     |        ia64: | TODO |
     |        m68k: |  ..  |

Documentation/features/vm/TLB/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: | N/A  |
     |        csky: | TODO |
-    |       h8300: |  ..  |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: |  ..  |

Documentation/features/vm/huge-vmap/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/vm/ioremap_prot/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: | TODO |
     |       arm64: | TODO |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

Documentation/features/vm/pte_special/arch-support.txt

@@ -11,7 +11,6 @@
     |         arm: |  ok  |
     |       arm64: |  ok  |
     |        csky: | TODO |
-    |       h8300: | TODO |
     |     hexagon: | TODO |
     |        ia64: | TODO |
     |        m68k: | TODO |

MAINTAINERS

@@ -8607,17 +8607,6 @@ L:	linux-efi@vger.kernel.org
 S:	Maintained
 F:	block/partitions/efi.*
 
-H8/300 ARCHITECTURE
-M:	Yoshinori Sato <ysato@users.sourceforge.jp>
-L:	uclinux-h8-devel@lists.sourceforge.jp (moderated for non-subscribers)
-S:	Maintained
-W:	http://uclinux-h8.sourceforge.jp
-T:	git git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git
-F:	arch/h8300/
-F:	drivers/clk/h8300/
-F:	drivers/clocksource/h8300_*.c
-F:	drivers/irqchip/irq-renesas-h8*.c
-
 HABANALABS PCI DRIVER
 M:	Oded Gabbay <ogabbay@kernel.org>
 S:	Supported

arch/csky/include/asm/Kbuild

@@ -3,7 +3,10 @@ generic-y += asm-offsets.h
 generic-y += extable.h
 generic-y += gpio.h
 generic-y += kvm_para.h
+generic-y += spinlock.h
+generic-y += spinlock_types.h
 generic-y += qrwlock.h
+generic-y += qrwlock_types.h
 generic-y += parport.h
 generic-y += user.h
 generic-y += vmlinux.lds.h

arch/csky/include/asm/spinlock.h

-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef __ASM_CSKY_SPINLOCK_H
-#define __ASM_CSKY_SPINLOCK_H
-
-#include <linux/spinlock_types.h>
-#include <asm/barrier.h>
-
-/*
- * Ticket-based spin-locking.
- */
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
-	arch_spinlock_t lockval;
-	u32 ticket_next = 1 << TICKET_NEXT;
-	u32 *p = &lock->lock;
-	u32 tmp;
-
-	asm volatile (
-		"1:	ldex.w		%0, (%2) \n"
-		"	mov		%1, %0	 \n"
-		"	add		%0, %3	 \n"
-		"	stex.w		%0, (%2) \n"
-		"	bez		%0, 1b   \n"
-		: "=&r" (tmp), "=&r" (lockval)
-		: "r"(p), "r"(ticket_next)
-		: "cc");
-
-	while (lockval.tickets.next != lockval.tickets.owner)
-		lockval.tickets.owner = READ_ONCE(lock->tickets.owner);
-
-	smp_mb();
-}
-
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
-	u32 tmp, contended, res;
-	u32 ticket_next = 1 << TICKET_NEXT;
-	u32 *p = &lock->lock;
-
-	do {
-		asm volatile (
-		"	ldex.w		%0, (%3)   \n"
-		"	movi		%2, 1	   \n"
-		"	rotli		%1, %0, 16 \n"
-		"	cmpne		%1, %0     \n"
-		"	bt		1f         \n"
-		"	movi		%2, 0	   \n"
-		"	add		%0, %0, %4 \n"
-		"	stex.w		%0, (%3)   \n"
-		"1:				   \n"
-		: "=&r" (res), "=&r" (tmp), "=&r" (contended)
-		: "r"(p), "r"(ticket_next)
-		: "cc");
-	} while (!res);
-
-	if (!contended)
-		smp_mb();
-
-	return !contended;
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
-	smp_mb();
-	WRITE_ONCE(lock->tickets.owner, lock->tickets.owner + 1);
-}
-
-static inline int arch_spin_value_unlocked(arch_spinlock_t lock)
-{
-	return lock.tickets.owner == lock.tickets.next;
-}
-
-static inline int arch_spin_is_locked(arch_spinlock_t *lock)
-{
-	return !arch_spin_value_unlocked(READ_ONCE(*lock));
-}
-
-static inline int arch_spin_is_contended(arch_spinlock_t *lock)
-{
-	struct __raw_tickets tickets = READ_ONCE(lock->tickets);
-
-	return (tickets.next - tickets.owner) > 1;
-}
-#define arch_spin_is_contended	arch_spin_is_contended
-
-#include <asm/qrwlock.h>
-
-#endif /* __ASM_CSKY_SPINLOCK_H */

arch/csky/include/asm/spinlock_types.h

-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef __ASM_CSKY_SPINLOCK_TYPES_H
-#define __ASM_CSKY_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_RAW_H
-# error "please don't include this file directly"
-#endif
-
-#define TICKET_NEXT	16
-
-typedef struct {
-	union {
-		u32 lock;
-		struct __raw_tickets {
-			/* little endian */
-			u16 owner;
-			u16 next;
-		} tickets;
-	};
-} arch_spinlock_t;
-
-#define __ARCH_SPIN_LOCK_UNLOCKED	{ { 0 } }
-
-#include <asm-generic/qrwlock_types.h>
-
-#endif /* __ASM_CSKY_SPINLOCK_TYPES_H */

arch/h8300/Kbuild

-# SPDX-License-Identifier: GPL-2.0-only
-obj-y	+= kernel/ mm/ boot/dts/
-
-# for cleaning
-subdir- += boot

arch/h8300/Kconfig

-# SPDX-License-Identifier: GPL-2.0
-config H8300
-        def_bool y
-	select ARCH_32BIT_OFF_T
-	select ARCH_HAS_BINFMT_FLAT
-	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
-	select BINFMT_FLAT_OLD_ALWAYS_RAM
-	select GENERIC_ATOMIC64
-	select HAVE_UID16
-	select VIRT_TO_BUS
-	select GENERIC_IRQ_SHOW
-	select FRAME_POINTER
-	select GENERIC_CPU_DEVICES
-	select MODULES_USE_ELF_RELA
-	select COMMON_CLK
-	select ARCH_WANT_FRAME_POINTERS
-	select OF
-	select OF_IRQ
-	select OF_EARLY_FLATTREE
-	select TIMER_OF
-	select H8300_TMR8
-	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_LZO
-	select HAVE_ARCH_KGDB
-	select HAVE_ARCH_HASH
-	select CPU_NO_EFFICIENT_FFS
-	select UACCESS_MEMCPY
-
-config CPU_BIG_ENDIAN
-	def_bool y
-
-config GENERIC_HWEIGHT
-	def_bool y
-
-config NO_IOPORT_MAP
-	def_bool y
-
-config GENERIC_CSUM
-        def_bool y
-
-config HZ
-	int
-	default 100
-
-config NR_CPUS
-	int
-	default 1
-
-source "arch/h8300/Kconfig.cpu"

arch/h8300/Kconfig.cpu

-# SPDX-License-Identifier: GPL-2.0
-config CPU_H8300H
-	bool
-
-config CPU_H8S
-	bool
-
-config H83069
-	bool
-	select CPU_H8300H
-	select H8300_TMR16
-	select RENESAS_H8300H_INTC
-
-config H8S2678
-	bool
-	select CPU_H8S
-	select H8300_TPU
-	select RENESAS_H8S_INTC
-
-config RAMKERNEL
-	bool
-
-config ROMKERNEL
-	bool
-
-menu "Processor type and features"
-
-choice
-prompt "H8/300 platform"
-
-config H8300_AE3068
-	bool "AE-3068/69"
-	select H83069
-	select RAMKERNEL
-	help
-	  AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
-	  More Information. (Japanese Only)
-	  <http://akizukidenshi.com/catalog/default.aspx>
-	  AE-3068/69 Evaluation Board Support
-	  More Information.
-	  <http://www.microtronique.com/ae3069lan.htm>
-
-config H8300_H8MAX
-	bool "H8MAX"
-	select H83069
-	select RAMKERNEL
-	help
-	  H8MAX Evaluation Board Support
-	  More Information. (Japanese Only)
-	  <http://strawberry-linux.com/h8/index.html>
-
-config H8300_KANEBEBE
-	bool "KaneBebe"
-	select H83069
-	select RAMKERNEL
-	help
-	  KaneBebe Evalition Board Support
-	  More Information. (Japanese Only)
-	  <http://www.nissin-tech.com/2009/10/uclinuxkane-bebe-h83069f.html>
-
-config H8300H_SIM
-	bool "H8/300H GDB Simulator"
-	select H83069
-	select ROMKERNEL
-	help
-	  GDB Simulator Support
-	  More Information.
-	  <http://sourceware.org/sid/>
-
-config H8S_EDOSK2674
-	bool "EDOSK-2674"
-	select H8S2678
-	select RAMKERNEL
-	help
-	  Renesas EDOSK-2674 Evaluation Board Support
-	  More Information.
-	  <http://www.azpower.com/H8-uClinux/index.html>
-	  <http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp>
-
-config H8S_SIM
-	bool "H8S GDB Simulator"
-	select H8S2678
-	select ROMKERNEL
-	help
-	  GDB Simulator Support
-	  More Information.
-	  <http://sourceware.org/sid/>
-
-endchoice
-
-config H8300_BUILTIN_DTB
-        string "Builtin DTB"
-	default ""
-
-config OFFSET
-        hex "Load offset"
-	default 0
-
-endmenu

arch/h8300/Kconfig.debug

-# SPDX-License-Identifier: GPL-2.0-only
-# dummy file, do not delete

arch/h8300/Makefile

-#
-# arch/h8300/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# (C) Copyright 2002-2015 Yoshinori Sato <ysato@users.sourceforge.jp>
-#
-
-KBUILD_DEFCONFIG := edosk2674_defconfig
-
-cflags-$(CONFIG_CPU_H8300H)	:= -mh
-aflags-$(CONFIG_CPU_H8300H)	:= -mh -Wa,--mach=h8300h
-ldflags-$(CONFIG_CPU_H8300H)	:= -mh8300helf_linux
-cflags-$(CONFIG_CPU_H8S)	:= -ms
-aflags-$(CONFIG_CPU_H8S)	:= -ms -Wa,--mach=h8300s
-ldflags-$(CONFIG_CPU_H8S)	:= -mh8300self_linux
-
-KBUILD_CFLAGS += $(cflags-y)
-KBUILD_CFLAGS += -mint32 -fno-builtin
-KBUILD_CFLAGS += -D__linux__
-KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
-KBUILD_AFLAGS += $(aflags-y)
-KBUILD_LDFLAGS += $(ldflags-y)
-
-CHECKFLAGS += -msize-long
-
-ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := $(call cc-cross-prefix, h8300-unknown-linux- h8300-linux-)
-endif
-
-libs-y	+= arch/$(ARCH)/lib/
-
-boot := arch/h8300/boot
-
-vmlinux.srec vmlinux.bin zImage uImage.bin: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-define archhelp
-  @echo  'vmlinux.bin  - Create raw binary'
-  @echo  'vmlinux.srec - Create srec binary'
-  @echo  'zImage       - Compressed kernel image'
-endef

arch/h8300/boot/Makefile

-# SPDX-License-Identifier: GPL-2.0
-# arch/h8300/boot/Makefile
-
-targets := vmlinux.srec vmlinux.bin zImage
-subdir- := compressed
-
-OBJCOPYFLAGS_vmlinux.srec := -Osrec
-OBJCOPYFLAGS_vmlinux.bin  := -Obinary
-OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S
-
-UIMAGE_LOADADDR = $(CONFIG_RAMBASE)
-UIMAGE_ENTRYADDR = $(shell /bin/bash -c 'printf "0x%08x" \
-	$$[$(CONFIG_RAMBASE) + $(CONFIG_OFFSET)]')
-
-$(obj)/vmlinux.srec $(obj)/vmlinux.bin:  vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/compressed/vmlinux: FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-
-$(obj)/uImage.bin: $(obj)/vmlinux.bin
-	$(call if_changed,uimage,none)
-
-CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec arch/$(ARCH)/uImage.bin

arch/h8300/boot/compressed/Makefile

-# SPDX-License-Identifier: GPL-2.0
-#
-# linux/arch/sh/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-
-#
-# IMAGE_OFFSET is the load offset of the compression loader
-# Assign dummy values if these 2 variables are not defined,
-# in order to suppress error message.
-#
-CONFIG_MEMORY_START     ?= 0x00400000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00280000
-IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET))))
-
-LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name 2>/dev/null)
-LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup -T $(obj)/vmlinux.lds \
-	--defsym output=$(CONFIG_MEMORY_START)
-
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
-	$(call if_changed,ld)
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-suffix-$(CONFIG_KERNEL_GZIP)    := gzip
-suffix-$(CONFIG_KERNEL_LZO)     := lzo
-compress-$(CONFIG_KERNEL_GZIP)  := gzip
-compress-$(CONFIG_KERNEL_LZO)   := lzo_with_size
-
-$(obj)/vmlinux.bin.$(suffix-y): $(obj)/vmlinux.bin FORCE
-	$(call if_changed,$(compress-y))
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300-linux -T
-OBJCOPYFLAGS := -O binary
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
-	$(call if_changed,ld)
-
-CFLAGS_misc.o = -O0

arch/h8300/boot/compressed/head.S

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *  linux/arch/h8300/boot/compressed/head.S
- *
- *  Copyright (C) 2006 Yoshinori Sato
- */
-
-#include <linux/linkage.h>
-
-	.section	.text..startup,"ax"
-	.global	startup
-startup:
-	mov.l	#startup, sp
-	mov.l	er0, er4
-	mov.l	#__sbss, er0
-	mov.l	#__ebss, er1
-	sub.l	er0, er1
-	shlr	er1
-	shlr	er1
-	sub.l	er2, er2
-1:
-	mov.l	er2, @er0
-	adds	#4, er0
-	dec.l	#1, er1
-	bne	1b
-	jsr	@decompress_kernel
-	mov.l	er4, er0
-	jmp	@output
-
-	.align	9
-fake_headers_as_bzImage:
-	.word	0
-	.ascii	"HdrS"		; header signature
-	.word	0x0202		; header version number (>= 0x0105)
-				; or else old loadlin-1.5 will fail)
-	.word	0		; default_switch
-	.word	0		; SETUPSEG
-	.word	0x1000
-	.word	0		; pointing to kernel version string
-	.byte	0		; = 0, old one (LILO, Loadlin,
-				; 0xTV: T=0 for LILO
-				;       V = version
-	.byte	1		; Load flags bzImage=1
-	.word	0x8000		; size to move, when setup is not
-	.long	0x100000	; 0x100000 = default for big kernel
-	.long	0		; address of loaded ramdisk image
-	.long	0		; its size in bytes
-
-	.end

arch/h8300/boot/compressed/misc.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/h8300/boot/compressed/misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for h8300 by Yoshinori Sato 2006
- */
-
-#include <linux/uaccess.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n)     memset((s), (0), (n))
-
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-extern char input_data[];
-extern int input_len;
-extern char output[];
-
-#define HEAP_SIZE             0x10000
-
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZO
-#include "../../../../lib/decompress_unlzo.c"
-#endif
-
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *)s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-	return s;
-}
-
-void *memcpy(void *dest, const void *src, size_t n)
-{
-	int i;
-	char *d = (char *)dest, *s = (char *)src;
-
-	for (i = 0; i < n; i++)
-		d[i] = s[i];
-	return dest;
-}
-
-static void error(char *x)
-{
-	while (1)
-		;	/* Halt */
-}
-
-void decompress_kernel(void)
-{
-	free_mem_ptr = (unsigned long)&_end;
-	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
-	__decompress(input_data, input_len, NULL, NULL, output, 0, NULL, error);
-}

arch/h8300/boot/compressed/vmlinux.lds

-/* SPDX-License-Identifier: GPL-2.0 */
-SECTIONS
-{
-        .text :
-        {
-        __stext = . ;
-	__text = .;
-	       *(.text..startup)
-	       *(.text)
-        __etext = . ;
-        }
-
-	.rodata :
-	{
-		*(.rodata)
-	}
-        . = ALIGN(0x4) ;
-        .data :
-
-        {
-        . = ALIGN(0x4) ;
-        __sdata = . ;
-        ___data_start = . ;
-                *(.data.*)
-	}
-        . = ALIGN(0x4) ;
-        .bss :
-        {
-        __sbss = . ;
-                *(.bss*)
-        . = ALIGN(0x4) ;
-        __ebss = . ;
-        }
-        _end = . ;
-}

arch/h8300/boot/compressed/vmlinux.scr

-SECTIONS
-{
-  .data : {
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .;
-	*(.data)
-	input_data_end = .;
-	}
-}

arch/h8300/boot/dts/Makefile

-# SPDX-License-Identifier: GPL-2.0
-obj-y += $(addsuffix .dtb.o, $(CONFIG_H8300_BUILTIN_DTB))
-
-dtb-$(CONFIG_H8300H_SIM) := h8300h_sim.dtb
-dtb-$(CONFIG_H8S_SIM) := h8s_sim.dtb
-dtb-$(CONFIG_H8S_EDOSK2674) := edosk2674.dtb

arch/h8300/boot/dts/edosk2674.dts

-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-/ {
-	compatible = "renesas,edosk2674";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&h8intc>;
-
-	chosen {
-		bootargs = "console=ttySC2,38400";
-		stdout-path = &sci2;
-	};
-	aliases {
-		serial0 = &sci0;
-		serial1 = &sci1;
-		serial2 = &sci2;
-	};
-
-	xclk: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <33333333>;
-		clock-output-names = "xtal";
-	};
-	pllclk: pllclk {
-		compatible = "renesas,h8s2678-pll-clock";
-		clocks = <&xclk>;
-		#clock-cells = <0>;
-		reg = <0xffff3b 1>, <0xffff45 1>;
-	};
-	core_clk: core_clk {
-		compatible = "renesas,h8300-div-clock";
-		clocks = <&pllclk>;
-		#clock-cells = <0>;
-		reg = <0xffff3b 1>;
-		renesas,width = <3>;
-	};
-	fclk: fclk {
-		compatible = "fixed-factor-clock";
-		clocks = <&core_clk>;
-		#clock-cells = <0>;
-		clock-div = <1>;
-		clock-mult = <1>;
-	};
-
-	memory@400000 {
-		device_type = "memory";
-		reg = <0x400000 0x800000>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "renesas,h8300";
-			clock-frequency = <33333333>;
-		};
-	};
-
-	h8intc: interrupt-controller@fffe00 {
-		compatible = "renesas,h8s-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfffe00 24>;
-	};
-
-	bsc: memory-controller@fffec0 {
-		compatible = "renesas,h8s-bsc", "renesas,h8300-bsc";
-		reg = <0xfffec0 24>;
-	};
-
-	tpu: timer@ffffe0 {
-		compatible = "renesas,tpu";
-		reg = <0xffffe0 16>, <0xfffff0 12>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-
-	timer8: timer@ffffb0 {
-		compatible = "renesas,8bit-timer";
-		reg = <0xffffb0 10>;
-		interrupts = <72 0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-
-	sci0: serial@ffff78 {
-		compatible = "renesas,sci";
-		reg = <0xffff78 8>;
-		interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-	sci1: serial@ffff80 {
-		compatible = "renesas,sci";
-		reg = <0xffff80 8>;
-		interrupts = <92 0>, <93 0>, <94 0>, <95 0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-	sci2: serial@ffff88 {
-		compatible = "renesas,sci";
-		reg = <0xffff88 8>;
-		interrupts = <96 0>, <97 0>, <98 0>, <99 0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-};

arch/h8300/boot/dts/h8300h_sim.dts

-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-/ {
-	compatible = "gnu,gdbsim";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&h8intc>;
-
-	chosen {
-		bootargs = "earlyprintk=h8300-sim";
-		stdout-path = <&sci0>;
-	};
-	aliases {
-		serial0 = &sci0;
-		serial1 = &sci1;
-	};
-
-	xclk: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-		clock-output-names = "xtal";
-	};
-	core_clk: core_clk {
-		compatible = "renesas,h8300-div-clock";
-		clocks = <&xclk>;
-		#clock-cells = <0>;
-		reg = <0xfee01b 2>;
-		renesas,width = <2>;
-	};
-	fclk: fclk {
-		compatible = "fixed-factor-clock";
-		clocks = <&core_clk>;
-		#clock-cells = <0>;
-		clock-div = <1>;
-		clock-mult = <1>;
-	};
-
-	memory@400000 {
-		device_type = "memory";
-		reg = <0x400000 0x400000>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "renesas,h8300";
-			clock-frequency = <20000000>;
-		};
-	};
-
-	h8intc: interrupt-controller@fee012 {
-		compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfee012 7>;
-	};
-
-	bsc: memory-controller@fee01e {
-		compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
-		reg = <0xfee01e 8>;
-	};
-
-	timer8: timer@ffff80 {
-		compatible = "renesas,8bit-timer";
-		reg = <0xffff80 10>;
-		interrupts = <36 0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-
-	timer16: timer@ffff68 {
-		compatible = "renesas,16bit-timer";
-		reg = <0xffff68 8>, <0xffff60 8>;
-		interrupts = <26 0>;
-		renesas,channel = <0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-
-	sci0: serial@ffffb0 {
-		compatible = "renesas,sci";
-		reg = <0xffffb0 8>;
-		interrupts = <52 0>, <53 0>, <54 0>, <55 0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-
-	sci1: serial@ffffb8 {
-		compatible = "renesas,sci";
-		reg = <0xffffb8 8>;
-		interrupts = <56 0>, <57 0>, <58 0>, <59 0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-};

arch/h8300/boot/dts/h8s_sim.dts

-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-/ {
-	compatible = "gnu,gdbsim";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&h8intc>;
-
-	chosen {
-		bootargs = "earlyprintk=h8300-sim";
-		stdout-path = <&sci0>;
-	};
-	aliases {
-		serial0 = &sci0;
-		serial1 = &sci1;
-	};
-
-	xclk: oscillator {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <33333333>;
-		clock-output-names = "xtal";
-	};
-	pllclk: pllclk {
-		compatible = "renesas,h8s2678-pll-clock";
-		clocks = <&xclk>;
-		#clock-cells = <0>;
-		reg = <0xfee03b 2>, <0xfee045 2>;
-	};
-	core_clk: core_clk {
-		compatible = "renesas,h8300-div-clock";
-		clocks = <&pllclk>;
-		#clock-cells = <0>;
-		reg = <0xfee03b 2>;
-		renesas,width = <3>;
-	};
-	fclk: fclk {
-		compatible = "fixed-factor-clock";
-		clocks = <&core_clk>;
-		#clock-cells = <0>;
-		clock-div = <1>;
-		clock-mult = <1>;
-	};
-
-	memory@400000 {
-		device_type = "memory";
-		reg = <0x400000 0x800000>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "renesas,h8300";
-			clock-frequency = <33333333>;
-		};
-	};
-
-	h8intc: interrupt-controller@fffe00 {
-		compatible = "renesas,h8s-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfffe00 24>;
-	};
-
-	bsc: memory-controller@fffec0 {
-		compatible = "renesas,h8s-bsc", "renesas,h8300-bsc";
-		reg = <0xfffec0 24>;
-	};
-
-	tpu: timer@ffffe0 {
-		compatible = "renesas,tpu";
-		reg = <0xffffe0 16>, <0xfffff0 12>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-
-	timer8: timer@ffffb0 {
-		compatible = "renesas,8bit-timer";
-		reg = <0xffffb0 10>;
-		interrupts = <72 0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-
-	sci0: serial@ffff78 {
-		compatible = "renesas,sci";
-		reg = <0xffff78 8>;
-		interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-	sci1: serial@ffff80 {
-		compatible = "renesas,sci";
-		reg = <0xffff80 8>;
-		interrupts = <92 0>, <93 0>, <94 0>, <95 0>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-};

arch/h8300/configs/edosk2674_defconfig

-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_USELIB is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_ADVISE_SYSCALLS is not set
-CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
-# CONFIG_BLOCK is not set
-CONFIG_H8S_SIM=y
-CONFIG_H8300_BUILTIN_DTB="h8s_sim"
-# CONFIG_BINFMT_SCRIPT is not set
-CONFIG_BINFMT_FLAT=y
-# CONFIG_COREDUMP is not set
-# CONFIG_UEVENT_HELPER is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_ALLOW_DEV_COREDUMP is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set

arch/h8300/configs/h8300h-sim_defconfig

-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_USELIB is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_ADVISE_SYSCALLS is not set
-CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
-# CONFIG_BLOCK is not set
-CONFIG_H8300H_SIM=y
-CONFIG_H8300_BUILTIN_DTB="h8300h_sim"
-# CONFIG_BINFMT_SCRIPT is not set
-CONFIG_BINFMT_FLAT=y
-# CONFIG_COREDUMP is not set
-# CONFIG_UEVENT_HELPER is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_ALLOW_DEV_COREDUMP is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_EARLYCON=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set

arch/h8300/configs/h8s-sim_defconfig

-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_USELIB is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-# CONFIG_ADVISE_SYSCALLS is not set
-CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
-# CONFIG_BLOCK is not set
-CONFIG_H8S_SIM=y
-CONFIG_H8300_BUILTIN_DTB="h8s_sim"
-# CONFIG_BINFMT_SCRIPT is not set
-CONFIG_BINFMT_FLAT=y
-# CONFIG_COREDUMP is not set
-# CONFIG_UEVENT_HELPER is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_ALLOW_DEV_COREDUMP is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_PROC_FS is not set
-# CONFIG_SYSFS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set

arch/h8300/include/asm/Kbuild

-# SPDX-License-Identifier: GPL-2.0
-generic-y += asm-offsets.h
-generic-y += cmpxchg.h
-generic-y += extable.h
-generic-y += kvm_para.h
-generic-y += mcs_spinlock.h
-generic-y += parport.h
-generic-y += spinlock.h

arch/h8300/include/asm/bitops.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_BITOPS_H
-#define _H8300_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- * Copyright 2002, Yoshinori Sato
- */
-
-#include <linux/compiler.h>
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-/*
- * Function prototypes to keep gcc -Wall happy
- */
-
-/*
- * ffz = Find First Zero in word. Undefined if no zero exists,
- * so code should check against ~0UL first..
- */
-static inline unsigned long ffz(unsigned long word)
-{
-	unsigned long result;
-
-	result = -1;
-	__asm__("1:\n\t"
-		"shlr.l %1\n\t"
-		"adds #1,%0\n\t"
-		"bcs 1b"
-		: "=r"(result),"=r"(word)
-		: "0"(result), "1"(word));
-	return result;
-}
-
-#define H8300_GEN_BITOP(FNAME, OP)				\
-static inline void FNAME(int nr, volatile unsigned long *addr)	\
-{								\
-	unsigned char *b_addr;					\
-	unsigned char bit = nr & 7;				\
-								\
-	b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3);	\
-	if (__builtin_constant_p(nr)) {				\
-		__asm__(OP " %1,%0" : "+WU"(*b_addr) : "i"(nr & 7));	\
-	} else {						\
-		__asm__(OP " %s1,%0" : "+WU"(*b_addr) : "r"(bit));	\
-	}							\
-}
-
-H8300_GEN_BITOP(set_bit,    "bset")
-H8300_GEN_BITOP(clear_bit,  "bclr")
-H8300_GEN_BITOP(change_bit, "bnot")
-#define __set_bit(nr, addr)    set_bit((nr), (addr))
-#define __clear_bit(nr, addr)  clear_bit((nr), (addr))
-#define __change_bit(nr, addr) change_bit((nr), (addr))
-
-#undef H8300_GEN_BITOP
-
-static inline int test_bit(int nr, const volatile unsigned long *addr)
-{
-	int ret = 0;
-	unsigned char *b_addr;
-	unsigned char bit = nr & 7;
-
-	b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3);
-	if (__builtin_constant_p(nr)) {
-		__asm__("bld %Z2,%1\n\t"
-			"rotxl %0\n\t"
-			: "=r"(ret)
-			: "WU"(*b_addr), "i"(nr & 7), "0"(ret) : "cc");
-	} else {
-		__asm__("btst %w2,%1\n\t"
-			"beq 1f\n\t"
-			"inc.l #1,%0\n"
-			"1:"
-			: "=r"(ret)
-			: "WU"(*b_addr), "r"(bit), "0"(ret) : "cc");
-	}
-	return ret;
-}
-
-#define __test_bit(nr, addr) test_bit(nr, addr)
-
-#define H8300_GEN_TEST_BITOP(FNNAME, OP)				\
-static inline int FNNAME(int nr, void *addr)				\
-{									\
-	int retval = 0;							\
-	char ccrsave;							\
-	unsigned char *b_addr;						\
-	unsigned char bit = nr & 7;					\
-									\
-	b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3);		\
-	if (__builtin_constant_p(nr)) {					\
-		__asm__("stc ccr,%s2\n\t"				\
-			"orc #0x80,ccr\n\t"				\
-			"bld %4,%1\n\t"					\
-			OP " %4,%1\n\t"					\
-			"rotxl.l %0\n\t"				\
-			"ldc %s2,ccr"					\
-			: "=r"(retval), "+WU" (*b_addr), "=&r"(ccrsave)	\
-			: "0"(retval), "i"(nr & 7) : "cc");		\
-	} else {							\
-		__asm__("stc ccr,%t3\n\t"				\
-			"orc #0x80,ccr\n\t"				\
-			"btst %s3,%1\n\t"				\
-			OP " %s3,%1\n\t"				\
-			"beq 1f\n\t"					\
-			"inc.l #1,%0\n\t"				\
-			"1:\n"						\
-			"ldc %t3,ccr"					\
-			: "=r"(retval), "+WU" (*b_addr)			\
-			: "0" (retval), "r"(bit) : "cc");		\
-	}								\
-	return retval;							\
-}									\
-									\
-static inline int __ ## FNNAME(int nr, void *addr)			\
-{									\
-	int retval = 0;							\
-	unsigned char *b_addr;						\
-	unsigned char bit = nr & 7;					\
-									\
-	b_addr = (unsigned char *)addr + ((nr >> 3) ^ 3);		\
-	if (__builtin_constant_p(nr)) {					\
-		__asm__("bld %3,%1\n\t"					\
-			OP " %3,%1\n\t"					\
-			"rotxl.l %0\n\t"				\
-			: "=r"(retval), "+WU"(*b_addr)			\
-			: "0" (retval), "i"(nr & 7));			\
-	} else {							\
-		__asm__("btst %s3,%1\n\t"				\
-			OP " %s3,%1\n\t"				\
-			"beq 1f\n\t"					\
-			"inc.l #1,%0\n\t"				\
-			"1:"						\
-			: "=r"(retval), "+WU"(*b_addr)			\
-			: "0" (retval), "r"(bit));			\
-	}								\
-	return retval;							\
-}
-
-H8300_GEN_TEST_BITOP(test_and_set_bit,	  "bset")
-H8300_GEN_TEST_BITOP(test_and_clear_bit,  "bclr")
-H8300_GEN_TEST_BITOP(test_and_change_bit, "bnot")
-#undef H8300_GEN_TEST_BITOP
-
-#include <asm-generic/bitops/ffs.h>
-
-static inline unsigned long __ffs(unsigned long word)
-{
-	unsigned long result;
-
-	result = -1;
-	__asm__("1:\n\t"
-		"shlr.l %1\n\t"
-		"adds #1,%0\n\t"
-		"bcc 1b"
-		: "=r" (result),"=r"(word)
-		: "0"(result), "1"(word));
-	return result;
-}
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-#include <asm-generic/bitops/le.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _H8300_BITOPS_H */

arch/h8300/include/asm/bug.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_BUG_H
-#define _H8300_BUG_H
-
-/* always true */
-#define is_valid_bugaddr(addr) (1)
-
-#include <asm-generic/bug.h>
-
-struct pt_regs;
-extern void die(const char *str, struct pt_regs *fp, unsigned long err);
-
-#endif

arch/h8300/include/asm/byteorder.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __H8300_BYTEORDER_H__
-#define __H8300_BYTEORDER_H__
-
-#include <linux/byteorder/big_endian.h>
-
-#endif

arch/h8300/include/asm/cache.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ARCH_H8300_CACHE_H
-#define __ARCH_H8300_CACHE_H
-
-/* bytes per L1 cache line */
-#define        L1_CACHE_SHIFT  2
-#define        L1_CACHE_BYTES  (1 << L1_CACHE_SHIFT)
-
-#define __cacheline_aligned
-#define ____cacheline_aligned
-
-#endif

arch/h8300/include/asm/elf.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_H8300_ELF_H
-#define __ASM_H8300_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-typedef unsigned long elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2MSB
-#define ELF_ARCH	EM_H8_300
-#if defined(CONFIG_CPU_H8300H)
-#define ELF_CORE_EFLAGS 0x810000
-#endif
-#if defined(CONFIG_CPU_H8S)
-#define ELF_CORE_EFLAGS 0x820000
-#endif
-
-#define ELF_PLAT_INIT(_r) do { (_r)->er1 = 0; } while (0)
-
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE         0xD0000000UL
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports.  */
-
-#define ELF_HWCAP	(0)
-
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.  */
-
-#define ELF_PLATFORM  (NULL)
-
-#define R_H8_NONE       0
-#define R_H8_DIR32      1
-#define R_H8_DIR32_28   2
-#define R_H8_DIR32_24   3
-#define R_H8_DIR32_16   4
-#define R_H8_DIR32U     6
-#define R_H8_DIR32U_28  7
-#define R_H8_DIR32U_24  8
-#define R_H8_DIR32U_20  9
-#define R_H8_DIR32U_16 10
-#define R_H8_DIR24     11
-#define R_H8_DIR24_20  12
-#define R_H8_DIR24_16  13
-#define R_H8_DIR24U    14
-#define R_H8_DIR24U_20 15
-#define R_H8_DIR24U_16 16
-#define R_H8_DIR16     17
-#define R_H8_DIR16U    18
-#define R_H8_DIR16S_32 19
-#define R_H8_DIR16S_28 20
-#define R_H8_DIR16S_24 21
-#define R_H8_DIR16S_20 22
-#define R_H8_DIR16S    23
-#define R_H8_DIR8      24
-#define R_H8_DIR8U     25
-#define R_H8_DIR8Z_32  26
-#define R_H8_DIR8Z_28  27
-#define R_H8_DIR8Z_24  28
-#define R_H8_DIR8Z_20  29
-#define R_H8_DIR8Z_16  30
-#define R_H8_PCREL16   31
-#define R_H8_PCREL8    32
-#define R_H8_BPOS      33
-#define R_H8_PCREL32   34
-#define R_H8_GOT32O    35
-#define R_H8_GOT16O    36
-#define R_H8_DIR16A8   59
-#define R_H8_DIR16R8   60
-#define R_H8_DIR24A8   61
-#define R_H8_DIR24R8   62
-#define R_H8_DIR32A16  63
-#define R_H8_ABS32     65
-#define R_H8_ABS32A16 127
-
-#endif

arch/h8300/include/asm/flat.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/h8300/asm/include/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __H8300_FLAT_H__
-#define __H8300_FLAT_H__
-
-#include <asm/unaligned.h>
-
-/*
- * on the H8 a couple of the relocations have an instruction in the
- * top byte.  As there can only be 24bits of address space,  we just
- * always preserve that 8bits at the top,  when it isn't an instruction
- * is is 0 (davidm@snapgear.com)
- */
-
-#define	flat_get_relocate_addr(rel)		(rel & ~0x00000001)
-static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
-					u32 *addr)
-{
-	u32 val = get_unaligned((__force u32 *)rp);
-	if (!(flags & FLAT_FLAG_GOTPIC))
-		val &= 0x00ffffff;
-	*addr = val;
-	return 0;
-}
-
-static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
-{
-	u32 *p = (__force u32 *)rp;
-	put_unaligned((addr & 0x00ffffff) | (*(char *)p << 24), p);
-	return 0;
-}
-
-#endif /* __H8300_FLAT_H__ */

arch/h8300/include/asm/hash.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_HASH_H
-#define _ASM_HASH_H
-
-/*
- * The later H8SX models have a 32x32-bit multiply, but the H8/300H
- * and H8S have only 16x16->32.  Since it's tolerably compact, this is
- * basically an inlined version of the __mulsi3 code.  Since the inputs
- * are not expected to be small, it's also simplfied by skipping the
- * early-out checks.
- *
- * (Since neither CPU has any multi-bit shift instructions, a
- * shift-and-add version is a non-starter.)
- *
- * TODO: come up with an arch-specific version of the hashing in fs/namei.c,
- * since that is heavily dependent on rotates.  Which, as mentioned, suck
- * horribly on H8.
- */
-
-#if defined(CONFIG_CPU_H300H) || defined(CONFIG_CPU_H8S)
-
-#define HAVE_ARCH__HASH_32 1
-
-/*
- * Multiply by k = 0x61C88647.  Fitting this into three registers requires
- * one extra instruction, but reducing register pressure will probably
- * make that back and then some.
- *
- * GCC asm note: %e1 is the high half of operand %1, while %f1 is the
- * low half.  So if %1 is er4, then %e1 is e4 and %f1 is r4.
- *
- * This has been designed to modify x in place, since that's the most
- * common usage, but preserve k, since hash_64() makes two calls in
- * quick succession.
- */
-static inline u32 __attribute_const__ __hash_32(u32 x)
-{
-	u32 temp;
-
-	asm(   "mov.w	%e1,%f0"
-	"\n	mulxu.w	%f2,%0"		/* klow * xhigh */
-	"\n	mov.w	%f0,%e1"	/* The extra instruction */
-	"\n	mov.w	%f1,%f0"
-	"\n	mulxu.w	%e2,%0"		/* khigh * xlow */
-	"\n	add.w	%e1,%f0"
-	"\n	mulxu.w	%f2,%1"		/* klow * xlow */
-	"\n	add.w	%f0,%e1"
-	: "=&r" (temp), "=r" (x)
-	: "%r" (GOLDEN_RATIO_32), "1" (x));
-	return x;
-}
-
-#endif
-#endif /* _ASM_HASH_H */

arch/h8300/include/asm/io.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_IO_H
-#define _H8300_IO_H
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-
-/* H8/300 internal I/O functions */
-
-#define __raw_readb __raw_readb
-static inline u8 __raw_readb(const volatile void __iomem *addr)
-{
-	return *(volatile u8 *)addr;
-}
-
-#define __raw_readw __raw_readw
-static inline u16 __raw_readw(const volatile void __iomem *addr)
-{
-	return *(volatile u16 *)addr;
-}
-
-#define __raw_readl __raw_readl
-static inline u32  __raw_readl(const volatile void __iomem *addr)
-{
-	return *(volatile u32 *)addr;
-}
-
-#define __raw_writeb __raw_writeb
-static inline void __raw_writeb(u8 b, const volatile void __iomem *addr)
-{
-	*(volatile u8 *)addr = b;
-}
-
-#define __raw_writew __raw_writew
-static inline void __raw_writew(u16 b, const volatile void __iomem *addr)
-{
-	*(volatile u16 *)addr = b;
-}
-
-#define __raw_writel __raw_writel
-static inline void __raw_writel(u32 b, const volatile void __iomem *addr)
-{
-	*(volatile u32 *)addr = b;
-}
-
-static inline void ctrl_bclr(int b, void __iomem *addr)
-{
-	if (__builtin_constant_p(b))
-		__asm__("bclr %1,%0" : "+WU"(*(u8 *)addr): "i"(b));
-	else
-		__asm__("bclr %w1,%0" : "+WU"(*(u8 *)addr): "r"(b));
-}
-
-static inline void ctrl_bset(int b, void __iomem *addr)
-{
-	if (__builtin_constant_p(b))
-		__asm__("bset %1,%0" : "+WU"(*(u8 *)addr): "i"(b));
-	else
-		__asm__("bset %w1,%0" : "+WU"(*(u8 *)addr): "r"(b));
-}
-
-#include <asm-generic/io.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _H8300_IO_H */

arch/h8300/include/asm/irq.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_IRQ_H_
-#define _H8300_IRQ_H_
-
-#if defined(CONFIG_CPU_H8300H)
-#define NR_IRQS 64
-#define IRQ_CHIP h8300h_irq_chip
-#define EXT_IRQ0 12
-#define EXT_IRQS 6
-#elif defined(CONFIG_CPU_H8S)
-#define NR_IRQS 128
-#define IRQ_CHIP h8s_irq_chip
-#define EXT_IRQ0 16
-#define EXT_IRQS 16
-#endif
-
-static inline int irq_canonicalize(int irq)
-{
-	return irq;
-}
-
-void h8300_init_ipr(void);
-extern struct irq_chip h8300h_irq_chip;
-extern struct irq_chip h8s_irq_chip;
-#endif /* _H8300_IRQ_H_ */

arch/h8300/include/asm/irqflags.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_IRQFLAGS_H
-#define _H8300_IRQFLAGS_H
-
-#ifdef CONFIG_CPU_H8300H
-typedef unsigned char h8300flags;
-
-static inline h8300flags arch_local_save_flags(void)
-{
-	h8300flags flags;
-
-	__asm__ volatile ("stc ccr,%w0" : "=r" (flags));
-	return flags;
-}
-
-static inline void arch_local_irq_disable(void)
-{
-	__asm__ volatile ("orc  #0xc0,ccr");
-}
-
-static inline void arch_local_irq_enable(void)
-{
-	__asm__ volatile ("andc #0x3f,ccr");
-}
-
-static inline h8300flags arch_local_irq_save(void)
-{
-	h8300flags flags;
-
-	__asm__ volatile ("stc ccr,%w0\n\t"
-		      "orc  #0xc0,ccr" : "=r" (flags));
-	return flags;
-}
-
-static inline void arch_local_irq_restore(h8300flags flags)
-{
-	__asm__ volatile ("ldc %w0,ccr" : : "r" (flags) : "cc");
-}
-
-static inline int arch_irqs_disabled_flags(unsigned long flags)
-{
-	return (flags & 0xc0) == 0xc0;
-}
-#endif
-#ifdef CONFIG_CPU_H8S
-typedef unsigned short h8300flags;
-
-static inline h8300flags arch_local_save_flags(void)
-{
-	h8300flags flags;
-
-	__asm__ volatile ("stc ccr,%w0\n\tstc exr,%x0" : "=r" (flags));
-	return flags;
-}
-
-static inline void arch_local_irq_disable(void)
-{
-	__asm__ volatile ("orc #0x80,ccr\n\t");
-}
-
-static inline void arch_local_irq_enable(void)
-{
-	__asm__ volatile ("andc #0x7f,ccr\n\t"
-		      "andc #0xf0,exr\n\t");
-}
-
-static inline h8300flags arch_local_irq_save(void)
-{
-	h8300flags flags;
-
-	__asm__ volatile ("stc ccr,%w0\n\t"
-		      "stc exr,%x0\n\t"
-		      "orc  #0x80,ccr\n\t"
-		      : "=r" (flags));
-	return flags;
-}
-
-static inline void arch_local_irq_restore(h8300flags flags)
-{
-	__asm__ volatile ("ldc %w0,ccr\n\t"
-		      "ldc %x0,exr"
-		      : : "r" (flags) : "cc");
-}
-
-static inline int arch_irqs_disabled_flags(h8300flags flags)
-{
-	return (flags & 0x0080) == 0x0080;
-}
-
-#endif
-
-static inline int arch_irqs_disabled(void)
-{
-	return arch_irqs_disabled_flags(arch_local_save_flags());
-}
-
-#endif /* _H8300_IRQFLAGS_H */

arch/h8300/include/asm/kgdb.h

-/*
- * Copyright (C) 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_H8300_KGDB_H
-#define _ASM_H8300_KGDB_H
-
-#define CACHE_FLUSH_IS_SAFE	1
-#define BUFMAX			2048
-
-enum regnames {
-	GDB_ER0, GDB_ER1, GDB_ER2, GDB_ER3,
-	GDB_ER4, GDB_ER5, GDB_ER6, GDB_SP,
-	GDB_CCR, GDB_PC,
-	GDB_CYCLLE,
-#if defined(CONFIG_CPU_H8S)
-	GDB_EXR,
-#endif
-	GDB_TICK, GDB_INST,
-#if defined(CONFIG_CPU_H8S)
-	GDB_MACH, GDB_MACL,
-#endif
-	/* do not change the last entry or anything below! */
-	GDB_NUMREGBYTES,		/* number of registers */
-};
-
-#define GDB_SIZEOF_REG		sizeof(u32)
-#if defined(CONFIG_CPU_H8300H)
-#define DBG_MAX_REG_NUM		(13)
-#elif defined(CONFIG_CPU_H8S)
-#define DBG_MAX_REG_NUM		(14)
-#endif
-#define NUMREGBYTES		(DBG_MAX_REG_NUM * GDB_SIZEOF_REG)
-
-#define BREAK_INSTR_SIZE	2
-static inline void arch_kgdb_breakpoint(void)
-{
-	__asm__ __volatile__("trapa #2");
-}
-
-#endif /* _ASM_H8300_KGDB_H */

arch/h8300/include/asm/mmu_context.h

-#ifndef _ASM_H8300_MMU_CONTEXT_H
-#define _ASM_H8300_MMU_CONTEXT_H
-
-#include <asm-generic/nommu_context.h>
-
-#endif /* _ASM_H8300_MMU_CONTEXT_H */

arch/h8300/include/asm/page.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_PAGE_H
-#define _H8300_PAGE_H
-
-#include <asm-generic/page.h>
-#include <linux/types.h>
-
-#define MAP_NR(addr) (((uintptr_t)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
-
-#ifndef __ASSEMBLY__
-extern unsigned long rom_length;
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-extern unsigned long _ramend;
-#endif
-
-#endif

arch/h8300/include/asm/page_offset.h

-
-#define PAGE_OFFSET_RAW		0x00000000

arch/h8300/include/asm/pgtable.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_PGTABLE_H
-#define _H8300_PGTABLE_H
-#include <asm-generic/pgtable-nopud.h>
-extern void paging_init(void);
-#define PAGE_NONE		__pgprot(0)    /* these mean nothing to NO_MM */
-#define PAGE_SHARED		__pgprot(0)    /* these mean nothing to NO_MM */
-#define PAGE_COPY		__pgprot(0)    /* these mean nothing to NO_MM */
-#define PAGE_READONLY	__pgprot(0)    /* these mean nothing to NO_MM */
-#define PAGE_KERNEL		__pgprot(0)    /* these mean nothing to NO_MM */
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ, off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-#define kern_addr_valid(addr)	(1)
-#define pgprot_writecombine(prot)  (prot)
-#define pgprot_noncached pgprot_writecombine
-
-static inline int pte_file(pte_t pte) { return 0; }
-#define swapper_pg_dir ((pgd_t *) 0)
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-extern int is_in_rom(unsigned long);
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define	VMALLOC_START	0
-#define	VMALLOC_END	0xffffffff
-
-#define arch_enter_lazy_cpu_mode()    do {} while (0)
-
-#endif /* _H8300_PGTABLE_H */

arch/h8300/include/asm/processor.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * include/asm-h8300/processor.h
- *
- * Copyright (C) 2002 Yoshinori Sato
- *
- * Based on: linux/asm-m68nommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_H8300_PROCESSOR_H
-#define __ASM_H8300_PROCESSOR_H
-
-#include <linux/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void)
-{
-	extern unsigned int	_sw_usp;
-
-	return _sw_usp;
-}
-
-static inline void wrusp(unsigned long usp)
-{
-	extern unsigned int	_sw_usp;
-
-	_sw_usp = usp;
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE	(0xFFFFFFFFUL)
-
-#ifdef __KERNEL__
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-#endif
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE	0
-
-struct thread_struct {
-	unsigned long  ksp;		/* kernel stack pointer */
-	unsigned long  usp;		/* user stack pointer */
-	unsigned long  ccr;		/* saved status register */
-	unsigned long  esp0;            /* points to SR of stack frame */
-	struct {
-		unsigned short *addr;
-		unsigned short inst;
-	} breakinfo;
-};
-
-#define INIT_THREAD  {						\
-	.ksp  = sizeof(init_stack) + (unsigned long)init_stack, \
-	.usp  = 0,						\
-	.ccr  = PS_S,						\
-	.esp0 = 0,						\
-	.breakinfo = {						\
-		.addr = (unsigned short *)-1,			\
-		.inst = 0					\
-	}							\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#if defined(CONFIG_CPU_H8300H)
-#define start_thread(_regs, _pc, _usp)				\
-do {								\
-	(_regs)->pc = (_pc);					\
-	(_regs)->ccr = 0x00;	   /* clear all flags */	\
-	(_regs)->er5 = current->mm->start_data;	/* GOT base */	\
-	(_regs)->sp = ((unsigned long)(_usp)) - sizeof(unsigned long) * 3; \
-} while (0)
-#endif
-#if defined(CONFIG_CPU_H8S)
-#define start_thread(_regs, _pc, _usp)				\
-do {								\
-	(_regs)->pc = (_pc);					\
-	(_regs)->ccr = 0x00;	   /* clear kernel flag */	\
-	(_regs)->exr = 0x78;	   /* enable all interrupts */	\
-	(_regs)->er5 = current->mm->start_data;	/* GOT base */	\
-	/* 14 = space for retaddr(4), vector(4), er0(4) and exr(2) on stack */ \
-	(_regs)->sp = ((unsigned long)(_usp)) - 14;		\
-} while (0)
-#endif
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-unsigned long __get_wchan(struct task_struct *p);
-
-#define	KSTK_EIP(tsk)	\
-	({			 \
-		unsigned long eip = 0;	      \
-		if ((tsk)->thread.esp0 > PAGE_SIZE &&	\
-		    MAP_NR((tsk)->thread.esp0) < max_mapnr)	 \
-			eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
-		eip; })
-
-#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax()    barrier()
-
-#define HARD_RESET_NOW() ({		\
-	local_irq_disable();		\
-	asm("jmp @@0");			\
-})
-
-#endif

arch/h8300/include/asm/ptrace.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_PTRACE_H
-#define _H8300_PTRACE_H
-
-#include <uapi/asm/ptrace.h>
-
-struct task_struct;
-
-#ifndef __ASSEMBLY__
-#ifndef PS_S
-#define PS_S  (0x10)
-#endif
-
-#if defined(CONFIG_CPU_H8300H)
-#define H8300_REGS_NO 11
-#endif
-#if defined(CONFIG_CPU_H8S)
-#define H8300_REGS_NO 12
-#endif
-
-#define arch_has_single_step()	(1)
-
-#define user_mode(regs) (!((regs)->ccr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-#define user_stack_pointer(regs) ((regs)->sp)
-#define current_pt_regs() ((struct pt_regs *) \
-	(THREAD_SIZE + (unsigned long)current_thread_info()) - 1)
-#define signal_pt_regs() ((struct pt_regs *)current->thread.esp0)
-#define current_user_stack_pointer() rdusp()
-#define task_pt_regs(task) \
-	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
-
-extern long h8300_get_reg(struct task_struct *task, int regno);
-extern int h8300_put_reg(struct task_struct *task, int regno,
-			 unsigned long data);
-
-#endif /* __ASSEMBLY__ */
-#endif /* _H8300_PTRACE_H */

arch/h8300/include/asm/signal.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_SIGNAL_H
-#define _H8300_SIGNAL_H
-
-#include <uapi/asm/signal.h>
-
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#define __ARCH_HAS_SA_RESTORER
-#include <asm/sigcontext.h>
-
-#endif /* _H8300_SIGNAL_H */

arch/h8300/include/asm/smp.h

-/* nothing required here yet */

arch/h8300/include/asm/string.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_STRING_H_
-#define _H8300_STRING_H_
-
-#ifdef __KERNEL__ /* only set these up for kernel code */
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *s, int c, size_t count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *d, const void *s, size_t count);
-
-#endif /* KERNEL */
-
-#endif

arch/h8300/include/asm/switch_to.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_SWITCH_TO_H
-#define _H8300_SWITCH_TO_H
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.  This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1, offset of tss in d1, and whether
- * the mm structures are shared in d2 (to avoid atc flushing).
- *
- * H8/300 Porting 2002/09/04 Yoshinori Sato
- */
-
-asmlinkage void resume(void);
-#define switch_to(prev, next, last) \
-do {			     \
-	void *_last;					    \
-	__asm__ __volatile__(				    \
-		"mov.l	%1, er0\n\t"			    \
-		"mov.l	%2, er1\n\t"			    \
-		"mov.l	%3, er2\n\t"			    \
-		"jsr @_resume\n\t"			    \
-		"mov.l	er2,%0\n\t"			    \
-		: "=r" (_last)				    \
-		: "r" (&(prev->thread)),		    \
-		  "r" (&(next->thread)),		    \
-		  "g" (prev)				    \
-		: "cc", "er0", "er1", "er2", "er3");	    \
-	(last) = _last;					    \
-} while (0)
-
-#endif /* _H8300_SWITCH_TO_H */

arch/h8300/include/asm/syscall.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_H8300_SYSCALLS_32_H
-#define __ASM_H8300_SYSCALLS_32_H
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <uapi/linux/audit.h>
-
-static inline int
-syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
-{
-	return regs->orig_er0;
-}
-
-static inline void
-syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
-		      unsigned long *args)
-{
-	*args++ = regs->er1;
-	*args++ = regs->er2;
-	*args++ = regs->er3;
-	*args++ = regs->er4;
-	*args++ = regs->er5;
-	*args   = regs->er6;
-}
-
-static inline int
-syscall_get_arch(struct task_struct *task)
-{
-	return AUDIT_ARCH_H8300;
-}
-
-
-/* Misc syscall related bits */
-asmlinkage long do_syscall_trace_enter(struct pt_regs *regs);
-asmlinkage void do_syscall_trace_leave(struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_H8300_SYSCALLS_32_H */

arch/h8300/include/asm/thread_info.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/* thread_info.h: h8300 low-level thread information
- * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#ifdef __KERNEL__
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#define THREAD_SIZE_ORDER	1
-#define THREAD_SIZE		8192	/* 2 pages */
-
-#ifndef __ASSEMBLY__
-
-/*
- * low level task data.
- * If you change this, change the TI_* offsets below to match.
- */
-struct thread_info {
-	struct task_struct *task;		/* main task structure */
-	unsigned long	   flags;		/* low level flags */
-	int		   cpu;			/* cpu we're on */
-	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task =		&tsk,			\
-	.flags =	0,			\
-	.cpu =		0,			\
-	.preempt_count = INIT_PREEMPT_COUNT,	\
-}
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
-	struct thread_info *ti;
-
-	__asm__("mov.l	sp, %0\n\t"
-		"and.w	%1, %T0"
-		: "=&r"(ti)
-		: "i" (~(THREAD_SIZE-1) & 0xffff));
-	return ti;
-}
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_SINGLESTEP		3	/* singlestepping active */
-#define TIF_MEMDIE		4	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
-#define TIF_NOTIFY_RESUME	6	/* callback before returning to user */
-#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
-#define TIF_SYSCALL_TRACEPOINT	8	/* for ftrace syscall instrumentation */
-#define TIF_POLLING_NRFLAG	9	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_NOTIFY_SIGNAL	10	/* signal notifications exist */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
-#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
-#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
-
-/* work to do in syscall trace */
-#define _TIF_WORK_SYSCALL_MASK	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
-				 _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
-
-/* work to do on any return to u-space */
-#define _TIF_ALLWORK_MASK	(_TIF_SYSCALL_TRACE | _TIF_SIGPENDING      | \
-				 _TIF_NEED_RESCHED  | _TIF_SYSCALL_AUDIT   | \
-				 _TIF_SINGLESTEP    | _TIF_NOTIFY_RESUME   | \
-				 _TIF_SYSCALL_TRACEPOINT | _TIF_NOTIFY_SIGNAL)
-
-/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK		(_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
-				 _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */

arch/h8300/include/asm/tlb.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __H8300_TLB_H__
-#define __H8300_TLB_H__
-
-#include <asm-generic/tlb.h>
-
-#endif

arch/h8300/include/asm/traps.h

-/*
- *  linux/include/asm-h8300/traps.h
- *
- *  Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _H8300_TRAPS_H
-#define _H8300_TRAPS_H
-
-extern void _system_call(void);
-extern void _interrupt_entry(void);
-extern void _trace_break(void);
-extern void _nmi(void);
-extern void _interrupt_entry(void);
-
-extern unsigned long *_interrupt_redirect_table;
-
-#define JMP_OP 0x5a000000
-#define JSR_OP 0x5e000000
-#define VECTOR(address) ((JMP_OP)|((unsigned long)address))
-#define REDIRECT(address) ((JSR_OP)|((unsigned long)address))
-#define CPU_VECTOR ((unsigned long *)0x000000)
-#define ADDR_MASK (0xffffff)
-
-#define TRACE_VEC 5
-
-#define TRAP0_VEC 8
-#define TRAP1_VEC 9
-#define TRAP2_VEC 10
-#define TRAP3_VEC 11
-
-extern char _start[], _etext[];
-#define check_kernel_text(addr) \
-	((addr >= (unsigned long)(_start)) && \
-	 (addr <  (unsigned long)(_etext)) && !(addr & 1))
-
-#endif /* _H8300_TRAPS_H */

arch/h8300/include/asm/user.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_USER_H
-#define _H8300_USER_H
-
-#include <asm/page.h>
-
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user (under
-   linux we use the 'trad-core' bfd).  There are quite a number of
-   obstacles to being able to view the contents of the floating point
-   registers, and until these are solved you will not be able to view the
-   contents of them.  Actually, you can read in the core file and look at
-   the contents of the user struct to find out what the floating point
-   registers contain.
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
-   is still the layout used by user (the new pt_regs doesn't have
-   all registers). */
-struct user_regs_struct {
-	long er1, er2, er3, er4, er5, er6;
-	long er0;
-	long usp;
-	long orig_er0;
-	long ccr;
-	long pc;
-};
-
-/* When the kernel dumps core, it starts by dumping the user struct -
-   this will be used by gdb to figure out where the data and stack segments
-   are within the file, and what virtual addresses to use. */
-struct user {
-/* We start with the registers, to mimic the way that "memory" is returned
-   from the ptrace(3,...) function.  */
-	struct user_regs_struct regs;	/* Where the registers are actually stored */
-/* ptrace does not yet supply these.  Someday.... */
-/* The rest of this junk is to help gdb figure out what goes where */
-	unsigned long int u_tsize;	/* Text segment size (pages). */
-	unsigned long int u_dsize;	/* Data segment size (pages). */
-	unsigned long int u_ssize;	/* Stack segment size (pages). */
-	unsigned long start_code;     /* Starting virtual address of text. */
-	unsigned long start_stack;	/* Starting virtual address of stack area.
-					   This is actually the bottom of the stack,
-					   the top of the stack is always found in the
-					   esp register.  */
-	long int signal;		/* Signal that caused the core dump. */
-	int reserved;			/* No longer used */
-	unsigned long u_ar0;		/* Used by gdb to help find the values for */
-	/* the registers. */
-	unsigned long magic;		/* To uniquely identify a core file */
-	char u_comm[32];		/* User command that was responsible */
-};
-
-#endif

arch/h8300/include/asm/vmalloc.h

-#ifndef _ASM_H8300_VMALLOC_H
-#define _ASM_H8300_VMALLOC_H
-
-#endif /* _ASM_H8300_VMALLOC_H */