can: sja1000: do not report txerr and rxerr during bus-off

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 215db185 ("can: sja1000: Consolidate and unify state change handling")
Link: https://lore.kernel.org/all/20220719143550.3681-4-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/sja1000/sja1000.c

@@ -404,9 +404,6 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 	txerr = priv->read_reg(priv, SJA1000_TXERR);
 	rxerr = priv->read_reg(priv, SJA1000_RXERR);
 
-	cf->data[6] = txerr;
-	cf->data[7] = rxerr;
-
 	if (isrc & IRQ_DOI) {
 		/* data overrun interrupt */
 		netdev_dbg(dev, "data overrun interrupt\n");
@@ -428,6 +425,10 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 		else
 			state = CAN_STATE_ERROR_ACTIVE;
 	}
+	if (state != CAN_STATE_BUS_OFF) {
+		cf->data[6] = txerr;
+		cf->data[7] = rxerr;
+	}
 	if (isrc & IRQ_BEI) {
 		/* bus error interrupt */
 		priv->can.can_stats.bus_error++;