Commit 1676587b authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge tag 'fixes-for-3.13a' of...

Merge tag 'fixes-for-3.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First round of fixes for IIO in the 3.13 cycle.

The usual mixed bag of fixes.

* 3 cases where kconfig dependencies were missing.  We need to keep a closer
  eye on this in new drivers.

* hid_sensors was abusing the iio_dev->trigger pointer.  We had a round
  of clearing this out some time ago but this driver clearly slipped through.

* A misuse of the IIO_ST macro, in mcp3422, which we should really make a
  concertive effort to finish removing.

* Avoid a double free introduced by recent buffer reference counting in the
  one driver that (quite reasonably!) does things differently (am335x)

* A missing mutex_unlock in kxsd9 that means that driver has been non
  functional for some time and no one noticed (including me who for once
  actually has one of the supported devices).

* An incorrect assumption about the parameters of sign_extend32 in mcp3422.

So nothing controversial.  The only substantial patch is the hid_sensors
one and that is actually just adding a new pointer to the devices private
state then moving the code over to it.
parents 5fa9576a 0ee005c7
......@@ -350,7 +350,7 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
hid_sensor_remove_trigger(indio_dev);
hid_sensor_remove_trigger(&accel_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
......@@ -363,10 +363,11 @@ static int hid_accel_3d_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct accel_3d_state *accel_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D);
iio_device_unregister(indio_dev);
hid_sensor_remove_trigger(indio_dev);
hid_sensor_remove_trigger(&accel_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
......
......@@ -112,9 +112,10 @@ static int kxsd9_read(struct iio_dev *indio_dev, u8 address)
mutex_lock(&st->buf_lock);
st->tx[0] = KXSD9_READ(address);
ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
if (ret)
return ret;
return (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
if (!ret)
ret = (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
mutex_unlock(&st->buf_lock);
return ret;
}
static IIO_CONST_ATTR(accel_scale_available,
......
......@@ -1047,6 +1047,7 @@ static int at91_adc_probe(struct platform_device *pdev)
} else {
if (!st->caps->has_tsmr) {
dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
ret = -ENODEV;
goto error_disable_adc_clk;
}
......
......@@ -88,10 +88,10 @@ static const int mcp3422_sample_rates[4] = {
/* sample rates to sign extension table */
static const int mcp3422_sign_extend[4] = {
[MCP3422_SRATE_240] = 12,
[MCP3422_SRATE_60] = 14,
[MCP3422_SRATE_15] = 16,
[MCP3422_SRATE_3] = 18 };
[MCP3422_SRATE_240] = 11,
[MCP3422_SRATE_60] = 13,
[MCP3422_SRATE_15] = 15,
[MCP3422_SRATE_3] = 17 };
/* Client data (each client gets its own) */
struct mcp3422 {
......
......@@ -229,12 +229,15 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev,
unsigned long flags,
const struct iio_buffer_setup_ops *setup_ops)
{
struct iio_buffer *buffer;
int ret;
indio_dev->buffer = iio_kfifo_allocate(indio_dev);
if (!indio_dev->buffer)
buffer = iio_kfifo_allocate(indio_dev);
if (!buffer)
return -ENOMEM;
iio_device_attach_buffer(indio_dev, buffer);
ret = request_threaded_irq(irq, pollfunc_th, pollfunc_bh,
flags, indio_dev->name, indio_dev);
if (ret)
......
......@@ -55,11 +55,10 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
return 0;
}
void hid_sensor_remove_trigger(struct iio_dev *indio_dev)
void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
{
iio_trigger_unregister(indio_dev->trig);
iio_trigger_free(indio_dev->trig);
indio_dev->trig = NULL;
iio_trigger_unregister(attrb->trigger);
iio_trigger_free(attrb->trigger);
}
EXPORT_SYMBOL(hid_sensor_remove_trigger);
......@@ -90,7 +89,7 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
dev_err(&indio_dev->dev, "Trigger Register Failed\n");
goto error_free_trig;
}
indio_dev->trig = trig;
indio_dev->trig = attrb->trigger = trig;
return ret;
......
......@@ -21,6 +21,6 @@
int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
struct hid_sensor_common *attrb);
void hid_sensor_remove_trigger(struct iio_dev *indio_dev);
void hid_sensor_remove_trigger(struct hid_sensor_common *attrb);
#endif
......@@ -348,7 +348,7 @@ static int hid_gyro_3d_probe(struct platform_device *pdev)
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
hid_sensor_remove_trigger(indio_dev);
hid_sensor_remove_trigger(&gyro_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
......@@ -361,10 +361,11 @@ static int hid_gyro_3d_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
iio_device_unregister(indio_dev);
hid_sensor_remove_trigger(indio_dev);
hid_sensor_remove_trigger(&gyro_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
......
......@@ -81,6 +81,8 @@ config SENSORS_LM3533
config TCS3472
tristate "TAOS TCS3472 color light-to-digital converter"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for the TAOS TCS3472
family of color light-to-digital converters with IR filter.
......
......@@ -314,7 +314,7 @@ static int hid_als_probe(struct platform_device *pdev)
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
hid_sensor_remove_trigger(indio_dev);
hid_sensor_remove_trigger(&als_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
......@@ -327,10 +327,11 @@ static int hid_als_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct als_state *als_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
iio_device_unregister(indio_dev);
hid_sensor_remove_trigger(indio_dev);
hid_sensor_remove_trigger(&als_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
......
......@@ -19,6 +19,8 @@ config AK8975
config MAG3110
tristate "Freescale MAG3110 3-Axis Magnetometer"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the Freescale MAG3110 3-Axis
magnetometer.
......
......@@ -351,7 +351,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
hid_sensor_remove_trigger(indio_dev);
hid_sensor_remove_trigger(&magn_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
......@@ -364,10 +364,11 @@ static int hid_magn_3d_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct magn_3d_state *magn_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
iio_device_unregister(indio_dev);
hid_sensor_remove_trigger(indio_dev);
hid_sensor_remove_trigger(&magn_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
......
......@@ -250,7 +250,12 @@ static irqreturn_t mag3110_trigger_handler(int irq, void *p)
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = idx, \
.scan_type = IIO_ST('s', 16, 16, IIO_BE), \
.scan_type = { \
.sign = 's', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_BE, \
}, \
}
static const struct iio_chan_spec mag3110_channels[] = {
......
......@@ -6,6 +6,8 @@ menu "Magnetometer sensors"
config SENSORS_HMC5843
tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here to add support for the Honeywell HMC5843, HMC5883 and
HMC5883L 3-Axis Magnetometer (digital compass).
......
......@@ -21,6 +21,8 @@
#include <linux/hid.h>
#include <linux/hid-sensor-ids.h>
#include <linux/iio/iio.h>
#include <linux/iio/trigger.h>
/**
* struct hid_sensor_hub_attribute_info - Attribute info
......@@ -184,6 +186,7 @@ struct hid_sensor_common {
struct platform_device *pdev;
unsigned usage_id;
bool data_ready;
struct iio_trigger *trigger;
struct hid_sensor_hub_attribute_info poll;
struct hid_sensor_hub_attribute_info report_state;
struct hid_sensor_hub_attribute_info power_state;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment