scsi: hisi_sas: Prevent parallel FLR and controller reset

If we issue a controller reset command during executing a FLR a hung task
may be found:

 Call trace:
  __switch_to+0x158/0x1cc
  __schedule+0x2e8/0x85c
  schedule+0x7c/0x110
  schedule_timeout+0x190/0x1cc
  __down+0x7c/0xd4
  down+0x5c/0x7c
  hisi_sas_task_exec+0x510/0x680 [hisi_sas_main]
  hisi_sas_queue_command+0x24/0x30 [hisi_sas_main]
  smp_execute_task_sg+0xf4/0x23c [libsas]
  sas_smp_phy_control+0x110/0x1e0 [libsas]
  transport_sas_phy_reset+0xc8/0x190 [libsas]
  phy_reset_work+0x2c/0x40 [libsas]
  process_one_work+0x1dc/0x48c
  worker_thread+0x15c/0x464
  kthread+0x160/0x170
  ret_from_fork+0x10/0x18

This is a race condition which occurs when the FLR completes first.

Here the host HISI_SAS_RESETTING_BIT flag out gets of sync as
HISI_SAS_RESETTING_BIT is not always cleared with the hisi_hba.sem held, so
now only set/unset HISI_SAS_RESETTING_BIT under hisi_hba.sem .

Link: https://lore.kernel.org/r/1639579061-179473-7-git-send-email-john.garry@huawei.comSigned-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/hisi_sas/hisi_sas_main.c

@@ -1574,7 +1574,6 @@ void hisi_sas_controller_reset_prepare(struct hisi_hba *hisi_hba)
 {
 	struct Scsi_Host *shost = hisi_hba->shost;
 
-	down(&hisi_hba->sem);
 	hisi_hba->phy_state = hisi_hba->hw->get_phys_state(hisi_hba);
 
 	scsi_block_requests(shost);
@@ -1599,9 +1598,9 @@ void hisi_sas_controller_reset_done(struct hisi_hba *hisi_hba)
 	if (hisi_hba->reject_stp_links_msk)
 		hisi_sas_terminate_stp_reject(hisi_hba);
 	hisi_sas_reset_init_all_devices(hisi_hba);
-	up(&hisi_hba->sem);
 	scsi_unblock_requests(shost);
 	clear_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags);
+	up(&hisi_hba->sem);
 
 	hisi_sas_rescan_topology(hisi_hba, hisi_hba->phy_state);
 }
@@ -1612,8 +1611,11 @@ static int hisi_sas_controller_prereset(struct hisi_hba *hisi_hba)
 	if (!hisi_hba->hw->soft_reset)
 		return -1;
 
-	if (test_and_set_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags))
+	down(&hisi_hba->sem);
+	if (test_and_set_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags)) {
+		up(&hisi_hba->sem);
 		return -1;
+	}
 
 	if (hisi_sas_debugfs_enable && hisi_hba->debugfs_itct[0].itct)
 		hisi_hba->hw->debugfs_snapshot_regs(hisi_hba);

drivers/scsi/hisi_sas/hisi_sas_v3_hw.c

@@ -4848,6 +4848,7 @@ static void hisi_sas_reset_prepare_v3_hw(struct pci_dev *pdev)
 	int rc;
 
 	dev_info(dev, "FLR prepare\n");
+	down(&hisi_hba->sem);
 	set_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags);
 	hisi_sas_controller_reset_prepare(hisi_hba);