Revert "MIPS: ralink: fix cpu clock of mt7621 and add dt clk devices"

Commit e6046b5e ("MIPS: ralink: fix cpu clock of mt7621 and add dt
clk devices") includes a file that doesn't exist, causing build
failures... Revert it.

References: https://lore.kernel.org/linux-mips/CAJsYDVJvviz8a2oVmb0XL3OB+=Eecu-3kC9T9vsmxpuC_BqDSA@mail.gmail.com/Signed-off-by: Paul Burton <paul.burton@mips.com>

arch/mips/include/asm/mach-ralink/mt7621.h

@@ -19,10 +19,6 @@
 #define SYSC_REG_CHIP_REV		0x0c
 #define SYSC_REG_SYSTEM_CONFIG0		0x10
 #define SYSC_REG_SYSTEM_CONFIG1		0x14
-#define SYSC_REG_CLKCFG0		0x2c
-#define SYSC_REG_CUR_CLK_STS		0x44
-
-#define MEMC_REG_CPU_PLL		0x648
 
 #define CHIP_REV_PKG_MASK		0x1
 #define CHIP_REV_PKG_SHIFT		16
@@ -30,22 +26,6 @@
 #define CHIP_REV_VER_SHIFT		8
 #define CHIP_REV_ECO_MASK		0xf
 
-#define XTAL_MODE_SEL_MASK		0x7
-#define XTAL_MODE_SEL_SHIFT		6
-
-#define CPU_CLK_SEL_MASK		0x3
-#define CPU_CLK_SEL_SHIFT		30
-
-#define CUR_CPU_FDIV_MASK		0x1f
-#define CUR_CPU_FDIV_SHIFT		8
-#define CUR_CPU_FFRAC_MASK		0x1f
-#define CUR_CPU_FFRAC_SHIFT		0
-
-#define CPU_PLL_PREDIV_MASK		0x3
-#define CPU_PLL_PREDIV_SHIFT		12
-#define CPU_PLL_FBDIV_MASK		0x7f
-#define CPU_PLL_FBDIV_SHIFT		4
-
 #define MT7621_DRAM_BASE                0x0
 #define MT7621_DDR2_SIZE_MIN		32
 #define MT7621_DDR2_SIZE_MAX		256

arch/mips/ralink/mt7621.c

@@ -9,22 +9,22 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <dt-bindings/clock/mt7621-clk.h>
 
 #include <asm/mipsregs.h>
 #include <asm/smp-ops.h>
 #include <asm/mips-cps.h>
 #include <asm/mach-ralink/ralink_regs.h>
 #include <asm/mach-ralink/mt7621.h>
-#include <asm/time.h>
 
 #include <pinmux.h>
 
 #include "common.h"
 
+#define SYSC_REG_SYSCFG		0x10
+#define SYSC_REG_CPLL_CLKCFG0	0x2c
+#define SYSC_REG_CUR_CLK_STS	0x44
+#define CPU_CLK_SEL		(BIT(30) | BIT(31))
+
 #define MT7621_GPIO_MODE_UART1		1
 #define MT7621_GPIO_MODE_I2C		2
 #define MT7621_GPIO_MODE_UART3_MASK	0x3
@@ -110,89 +110,49 @@ static struct rt2880_pmx_group mt7621_pinmux_data[] = {
 	{ 0 }
 };
 
-static struct clk *clks[MT7621_CLK_MAX];
-static struct clk_onecell_data clk_data = {
-	.clks = clks,
-	.clk_num = ARRAY_SIZE(clks),
-};
-
 phys_addr_t mips_cpc_default_phys_base(void)
 {
 	panic("Cannot detect cpc address");
 }
 
-static struct clk *__init mt7621_add_sys_clkdev(
-	const char *id, unsigned long rate)
-{
-	struct clk *clk;
-	int err;
-
-	clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
-	if (IS_ERR(clk))
-		panic("failed to allocate %s clock structure", id);
-
-	err = clk_register_clkdev(clk, id, NULL);
-	if (err)
-		panic("unable to register %s clock device", id);
-
-	return clk;
-}
-
 void __init ralink_clk_init(void)
 {
-	const static u32 prediv_tbl[] = {0, 1, 2, 2};
-	u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
-	u32 pll, prediv, fbdiv;
-	u32 xtal_clk, cpu_clk, bus_clk;
-
-	syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
-	xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
+	int cpu_fdiv = 0;
+	int cpu_ffrac = 0;
+	int fbdiv = 0;
+	u32 clk_sts, syscfg;
+	u8 clk_sel = 0, xtal_mode;
+	u32 cpu_clk;
 
-	clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0);
-	clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK;
-
-	curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
-	ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK;
-	ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK;
-
-	if (xtal_sel <= 2)
-		xtal_clk = 20 * 1000 * 1000;
-	else if (xtal_sel <= 5)
-		xtal_clk = 40 * 1000 * 1000;
-	else
-		xtal_clk = 25 * 1000 * 1000;
+	if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
+		clk_sel = 1;
 
 	switch (clk_sel) {
 	case 0:
-		cpu_clk = 500 * 1000 * 1000;
+		clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
+		cpu_fdiv = ((clk_sts >> 8) & 0x1F);
+		cpu_ffrac = (clk_sts & 0x1F);
+		cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
 		break;
+
 	case 1:
-		pll = rt_memc_r32(MEMC_REG_CPU_PLL);
-		fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK;
-		prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK;
-		cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv];
+		fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
+		syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
+		xtal_mode = (syscfg >> 6) & 0x7;
+		if (xtal_mode >= 6) {
+			/* 25Mhz Xtal */
+			cpu_clk = 25 * fbdiv * 1000 * 1000;
+		} else if (xtal_mode >= 3) {
+			/* 40Mhz Xtal */
+			cpu_clk = 40 * fbdiv * 1000 * 1000;
+		} else {
+			/* 20Mhz Xtal */
+			cpu_clk = 20 * fbdiv * 1000 * 1000;
+		}
 		break;
-	default:
-		cpu_clk = xtal_clk;
 	}
-
-	cpu_clk = cpu_clk / ffiv * ffrac;
-	bus_clk = cpu_clk / 4;
-
-	clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk);
-	clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk);
-
-	pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000);
-	mips_hpt_frequency = cpu_clk / 2;
 }
 
-static void __init mt7621_clocks_init_dt(struct device_node *np)
-{
-	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-}
-
-CLK_OF_DECLARE(mt7621_clk, "mediatek,mt7621-pll", mt7621_clocks_init_dt);
-
 void __init ralink_of_remap(void)
 {
 	rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");

arch/mips/ralink/timer-gic.c

@@ -11,14 +11,14 @@
 
 #include <linux/of.h>
 #include <linux/clk-provider.h>
-#include <asm/time.h>
+#include <linux/clocksource.h>
 
 #include "common.h"
 
 void __init plat_time_init(void)
 {
 	ralink_of_remap();
-	ralink_clk_init();
+
 	of_clk_init(NULL);
 	timer_probe();
 }