Commit 16cd6276 authored by Sam Ravnborg's avatar Sam Ravnborg

dt-bindings: display: convert innolux,p097pfg to DT Schema

Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Cc: Lin Huang <hl@rock-chips.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-11-sam@ravnborg.org
parent ba98fc38
Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
Required properties:
- compatible: should be "innolux,p097pfg"
- reg: DSI virtual channel of the peripheral
- avdd-supply: phandle of the regulator that provides positive voltage
- avee-supply: phandle of the regulator that provides negative voltage
- enable-gpios: panel enable gpio
Optional properties:
- backlight: phandle of the backlight device attached to the panel
Example:
&mipi_dsi {
panel@0 {
compatible = "innolux,p079zca";
reg = <0>;
avdd-supply = <...>;
avee-supply = <...>;
backlight = <&backlight>;
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
};
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/innolux,p097pfg.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
maintainers:
- Lin Huang <hl@rock-chips.com>
allOf:
- $ref: panel-common.yaml#
properties:
compatible:
const: innolux,p097pfg
backlight: true
enable-gpios: true
reg: true
avdd-supply:
description: The regulator that provides positive voltage
avee-supply:
description: The regulator that provides negative voltage
required:
- compatible
- reg
- avdd-supply
- avee-supply
- enable-gpios
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
dsi {
#address-cells = <1>;
#size-cells = <0>;
panel@0 {
compatible = "innolux,p097pfg";
reg = <0>;
avdd-supply = <&avdd>;
avee-supply = <&avee>;
backlight = <&backlight>;
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
};
...
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment