Commit 16e8e807 authored by Stephan Gerhold's avatar Stephan Gerhold Committed by Bjorn Andersson

arm64: dts: qcom: Add device tree for Longcheer L8150

Longcheer L8150 is a smartphone based on MSM8916 which is
used in several rebrands like the Snapdragon 410
Android One devices or the Wileyfox Swift.

Add a device tree for L8150 with initial support for:
  - SDHCI (internal and external storage)
  - USB Device Mode
  - UART
  - Regulators
Co-developed-by: default avatarNikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: default avatarNikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 1329c1ab
......@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
......
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
#include "msm8916.dtsi"
#include "pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Longcheer L8150";
compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0";
};
soc {
sdhci@7824000 {
status = "okay";
vmmc-supply = <&pm8916_l8>;
vqmmc-supply = <&pm8916_l5>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
sdhci@7864000 {
status = "okay";
vmmc-supply = <&pm8916_l11>;
vqmmc-supply = <&pm8916_l12>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
non-removable;
};
serial@78b0000 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
};
usb@78d9000 {
status = "okay";
dr_mode = "peripheral";
extcon = <&usb_vbus>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy {
extcon = <&usb_vbus>;
v1p8-supply = <&pm8916_l7>;
v3p3-supply = <&pm8916_l13>;
};
};
};
/*
* Attempting to enable these devices causes a "synchronous
* external abort". Suspected cause is that the debug power
* domain is not enabled by default on this device.
* Disable these devices for now to avoid the crash.
*
* See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/
*/
tpiu@820000 { status = "disabled"; };
funnel@821000 { status = "disabled"; };
replicator@824000 { status = "disabled"; };
etf@825000 { status = "disabled"; };
etr@826000 { status = "disabled"; };
funnel@841000 { status = "disabled"; };
debug@850000 { status = "disabled"; };
debug@852000 { status = "disabled"; };
debug@854000 { status = "disabled"; };
debug@856000 { status = "disabled"; };
etm@85c000 { status = "disabled"; };
etm@85d000 { status = "disabled"; };
etm@85e000 { status = "disabled"; };
etm@85f000 { status = "disabled"; };
};
// FIXME: Use extcon device provided by charger driver when available
usb_vbus: usb-vbus {
compatible = "linux,extcon-usb-gpio";
vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_vbus_default>;
};
};
&msmgpio {
usb_vbus_default: usb-vbus-default {
pinmux {
function = "gpio";
pins = "gpio62";
};
pinconf {
pins = "gpio62";
bias-pull-up;
};
};
};
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
s1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1300000>;
};
s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
};
s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2100000>;
};
l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1287500>;
};
l4 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l8 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2900000>;
};
l9 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l10 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2800000>;
};
l11 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
l13 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
l18 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment