arm64: dts: ls1088ardb: update PHY nodes with IRQ information

Describe the IRQs for both the QSGMII PHYs and the 10GBASE-R PHY found
on the LS1088ARDB board.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts

@@ -83,34 +83,42 @@ &emdio1 {
 	status = "okay";
 
 	mdio1_phy5: ethernet-phy@c {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0xc>;
 	};
 
 	mdio1_phy6: ethernet-phy@d {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0xd>;
 	};
 
 	mdio1_phy7: ethernet-phy@e {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0xe>;
 	};
 
 	mdio1_phy8: ethernet-phy@f {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0xf>;
 	};
 
 	mdio1_phy1: ethernet-phy@1c {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x1c>;
 	};
 
 	mdio1_phy2: ethernet-phy@1d {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x1d>;
 	};
 
 	mdio1_phy3: ethernet-phy@1e {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x1e>;
 	};
 
 	mdio1_phy4: ethernet-phy@1f {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x1f>;
 	};
 };
@@ -120,6 +128,7 @@ &emdio2 {
 
 	mdio2_aquantia_phy: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x0>;
 	};
 };