Commit 17364b80 authored by Dmitry Bezrukov's avatar Dmitry Bezrukov Committed by David S. Miller

net: usb: aqc111: Driver skeleton for Aquantia AQtion USB to 5GbE

Initialize usb_driver structure skeleton
Signed-off-by: default avatarDmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: default avatarIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 712ee16c
...@@ -613,4 +613,16 @@ config USB_NET_CH9200 ...@@ -613,4 +613,16 @@ config USB_NET_CH9200
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called ch9200. module will be called ch9200.
config USB_NET_AQC111
tristate "Aquantia AQtion USB to 5/2.5GbE Controllers support"
depends on USB_USBNET
select CRC32
default y
help
This option adds support for Aquantia AQtion USB
Ethernet adapters based on AQC111U/AQC112 chips.
This driver should work with at least the following devices:
* Aquantia AQtion USB to 5GbE
endif # USB_NET_DRIVERS endif # USB_NET_DRIVERS
...@@ -40,3 +40,4 @@ obj-$(CONFIG_USB_VL600) += lg-vl600.o ...@@ -40,3 +40,4 @@ obj-$(CONFIG_USB_VL600) += lg-vl600.o
obj-$(CONFIG_USB_NET_QMI_WWAN) += qmi_wwan.o obj-$(CONFIG_USB_NET_QMI_WWAN) += qmi_wwan.o
obj-$(CONFIG_USB_NET_CDC_MBIM) += cdc_mbim.o obj-$(CONFIG_USB_NET_CDC_MBIM) += cdc_mbim.o
obj-$(CONFIG_USB_NET_CH9200) += ch9200.o obj-$(CONFIG_USB_NET_CH9200) += ch9200.o
obj-$(CONFIG_USB_NET_AQC111) += aqc111.o
// SPDX-License-Identifier: GPL-2.0-or-later
/* Aquantia Corp. Aquantia AQtion USB to 5GbE Controller
* Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
* Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
* Copyright (C) 2002-2003 TiVo Inc.
* Copyright (C) 2017-2018 ASIX
* Copyright (C) 2018 Aquantia Corp.
*/
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
static const struct driver_info aqc111_info = {
.description = "Aquantia AQtion USB to 5GbE Controller",
};
#define AQC111_USB_ETH_DEV(vid, pid, table) \
USB_DEVICE_INTERFACE_CLASS((vid), (pid), USB_CLASS_VENDOR_SPEC), \
.driver_info = (unsigned long)&(table) \
}, \
{ \
USB_DEVICE_AND_INTERFACE_INFO((vid), (pid), \
USB_CLASS_COMM, \
USB_CDC_SUBCLASS_ETHERNET, \
USB_CDC_PROTO_NONE), \
.driver_info = (unsigned long)&(table),
static const struct usb_device_id products[] = {
{AQC111_USB_ETH_DEV(0x2eca, 0xc101, aqc111_info)},
{ },/* END */
};
MODULE_DEVICE_TABLE(usb, products);
static struct usb_driver aq_driver = {
.name = "aqc111",
.id_table = products,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
};
module_usb_driver(aq_driver);
MODULE_DESCRIPTION("Aquantia AQtion USB to 5/2.5GbE Controllers");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment