ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>

This removes <mach/hardware.h> and <mach/db8500-regs.h>
from the Ux500, merging them into the local include
"db8500-regs.h" in mach-ux500. There is some impact
outside the ux500 machine, but most of it is dealt with
in earlier patches.

Contains portions of a clean-up patch from Arnd Bergmann.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/mach-ux500/board-mop500-audio.c

@@ -11,7 +11,6 @@
 #include <linux/platform_data/dma-ste-dma40.h>
 
 #include <mach/devices.h>
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <linux/platform_data/asoc-ux500-msp.h>
 

arch/arm/mach-ux500/board-mop500-pins.c

@@ -13,8 +13,6 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/hardware.h>
-
 #include "pins-db8500.h"
 #include "board-mop500.h"
 

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -15,8 +15,8 @@
 
 #include <asm/mach-types.h>
 #include <mach/devices.h>
-#include <mach/hardware.h>
 
+#include "db8500-regs.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
 #include "ste-dma40-db8500.h"

arch/arm/mach-ux500/board-mop500-uib.c

@@ -11,7 +11,6 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 
-#include <mach/hardware.h>
 #include "board-mop500.h"
 #include "id.h"
 

arch/arm/mach-ux500/board-mop500.c

@@ -41,13 +41,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
 #include <linux/platform_data/crypto-ux500.h>
 
 #include "ste-dma40-db8500.h"
+#include "db8500-regs.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"

arch/arm/mach-ux500/cache-l2x0.c

@@ -9,8 +9,8 @@
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <mach/hardware.h>
 
+#include "db8500-regs.h"
 #include "id.h"
 
 static void __iomem *l2x0_base;

arch/arm/mach-ux500/cpu-db8500.c

@@ -28,15 +28,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 
-#include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <mach/db8500-regs.h>
 #include <mach/irqs.h>
 
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
-
+#include "db8500-regs.h"
 #include "board-mop500.h"
 #include "id.h"
 

arch/arm/mach-ux500/cpu.c

@@ -24,11 +24,11 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 
 #include "board-mop500.h"
+#include "db8500-regs.h"
 #include "id.h"
 
 /*

arch/arm/mach-ux500/cpuidle.c

@@ -21,6 +21,8 @@
 #include <asm/cpuidle.h>
 #include <asm/proc-fns.h>
 
+#include "db8500-regs.h"
+
 static atomic_t master = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(master_lock);
 static DEFINE_PER_CPU(struct cpuidle_device, ux500_cpuidle_device);

arch/arm/mach-ux500/include/mach/db8500-regs.h → arch/arm/mach-ux500/db8500-regs.h

@@ -170,4 +170,32 @@
 /* SoC identification number information */
 #define U8500_BB_UID_BASE      (U8500_BACKUPRAM1_BASE + 0xFC0)
 
+/* Offsets to specific addresses in some IP blocks for DMA */
+#define MSP_TX_RX_REG_OFFSET	0
+#define CRYP1_RX_REG_OFFSET	0x10
+#define CRYP1_TX_REG_OFFSET	0x8
+#define HASH1_TX_REG_OFFSET	0x4
+
+/*
+ * Macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL	0xf0000000
+#define U8500_IO_PHYSICAL	0xa0000000
+/* This is where we map in the ROM to check ASIC IDs */
+#define UX500_VIRT_ROM		0xf0000000
+
+/* This macro is used in assembly, so no cast */
+#define IO_ADDRESS(x)           \
+	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+
+/* typesafe io address */
+#define __io_address(n)		IOMEM(IO_ADDRESS(n))
+
+/* Used by some plat-nomadik code */
+#define io_p2v(n)		__io_address(n)
+
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
 #endif

arch/arm/mach-ux500/devices-common.c

@@ -13,7 +13,6 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 
 #include "devices-common.h"

arch/arm/mach-ux500/devices-db8500.c

@@ -15,10 +15,10 @@
 #include <linux/platform_data/dma-ste-dma40.h>
 #include <linux/mfd/dbx500-prcmu.h>
 
-#include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/irqs.h>
 
+#include "db8500-regs.h"
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
 

arch/arm/mach-ux500/devices-db8500.h

@@ -10,6 +10,7 @@
 
 #include <linux/platform_data/usb-musb-ux500.h>
 #include <mach/irqs.h>
+#include "db8500-regs.h"
 #include "devices-common.h"
 
 struct ske_keypad_platform_data;

arch/arm/mach-ux500/devices.c

@@ -11,9 +11,10 @@
 #include <linux/io.h>
 #include <linux/amba/bus.h>
 
-#include <mach/hardware.h>
 #include <mach/setup.h>
 
+#include "db8500-regs.h"
+
 void __init amba_add_devices(struct amba_device *devs[], int num)
 {
 	int i;

arch/arm/mach-ux500/id.c

@@ -14,9 +14,9 @@
 #include <asm/cacheflush.h>
 #include <asm/mach/map.h>
 
-#include <mach/hardware.h>
 #include <mach/setup.h>
 
+#include "db8500-regs.h"
 #include "id.h"
 
 struct dbx500_asic_id dbx500_id;

arch/arm/mach-ux500/include/mach/hardware.h

-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * U8500 hardware definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-/*
- * Macros to get at IO space when running virtually
- * We dont map all the peripherals, let ioremap do
- * this for us. We map only very basic peripherals here.
- */
-#define U8500_IO_VIRTUAL	0xf0000000
-#define U8500_IO_PHYSICAL	0xa0000000
-/* This is where we map in the ROM to check ASIC IDs */
-#define UX500_VIRT_ROM		0xf0000000
-
-/* This macro is used in assembly, so no cast */
-#define IO_ADDRESS(x)           \
-	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
-
-/* typesafe io address */
-#define __io_address(n)		IOMEM(IO_ADDRESS(n))
-
-/* Used by some plat-nomadik code */
-#define io_p2v(n)		__io_address(n)
-
-#include <mach/db8500-regs.h>
-
-#define MSP_TX_RX_REG_OFFSET	0
-#define CRYP1_RX_REG_OFFSET	0x10
-#define CRYP1_TX_REG_OFFSET	0x8
-#define HASH1_TX_REG_OFFSET	0x4
-
-#ifndef __ASSEMBLY__
-
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-
-#endif				/* __ASSEMBLY__ */
-#endif				/* __MACH_HARDWARE_H */

arch/arm/mach-ux500/include/mach/irqs.h

@@ -10,8 +10,6 @@
 #ifndef ASM_ARCH_IRQS_H
 #define ASM_ARCH_IRQS_H
 
-#include <mach/hardware.h>
-
 #define IRQ_LOCALTIMER			29
 #define IRQ_LOCALWDOG			30
 

arch/arm/mach-ux500/include/mach/uncompress.h

@@ -22,7 +22,8 @@
 #include <asm/mach-types.h>
 #include <linux/io.h>
 #include <linux/amba/serial.h>
-#include <mach/hardware.h>
+/* TODO: This goes away in multiplatform boot, this file gets deleted */
+#include "../../db8500-regs.h"
 
 void __iomem *ux500_uart_base;
 

arch/arm/mach-ux500/platsmp.c

@@ -22,9 +22,9 @@
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
-#include <mach/hardware.h>
 #include <mach/setup.h>
 
+#include "db8500-regs.h"
 #include "id.h"
 
 /* This is called from headsmp.S to wakeup the secondary core */

arch/arm/mach-ux500/pm.c

@@ -13,7 +13,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/arm-ux500-pm.h>
 
-#include <mach/hardware.h>
+#include "db8500-regs.h"
 
 /* ARM WFI Standby signal register */
 #define PRCM_ARM_WFI_STANDBY    (prcmu_base + 0x130)

arch/arm/mach-ux500/timer.c

@@ -14,9 +14,9 @@
 #include <asm/smp_twd.h>
 
 #include <mach/setup.h>
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#include "db8500-regs.h"
 #include "id.h"
 
 #ifdef CONFIG_HAVE_ARM_TWD

arch/arm/mach-ux500/usb.c

@@ -10,7 +10,7 @@
 #include <linux/platform_data/usb-musb-ux500.h>
 #include <linux/platform_data/dma-ste-dma40.h>
 
-#include <mach/hardware.h>
+#include "db8500-regs.h"
 
 #define MUSB_DMA40_RX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \

drivers/clk/ux500/clk-prcc.c

@@ -13,7 +13,6 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/types.h>
-#include <mach/hardware.h>
 
 #include "clk.h"
 

drivers/clocksource/clksrc-dbx500-prcmu.c

@@ -18,7 +18,6 @@
 #include <asm/sched_clock.h>
 
 #include <mach/setup.h>
-#include <mach/hardware.h>
 
 #define RATE_32K		32768
 

drivers/crypto/ux500/cryp/cryp.c

@@ -12,8 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <mach/hardware.h>
-
 #include "cryp_p.h"
 #include "cryp.h"
 

drivers/crypto/ux500/cryp/cryp_core.c

@@ -32,7 +32,6 @@
 #include <crypto/scatterwalk.h>
 
 #include <linux/platform_data/crypto-ux500.h>
-#include <mach/hardware.h>
 
 #include "cryp_p.h"
 #include "cryp.h"

drivers/crypto/ux500/hash/hash_core.c

@@ -32,7 +32,6 @@
 #include <crypto/algapi.h>
 
 #include <linux/platform_data/crypto-ux500.h>
-#include <mach/hardware.h>
 
 #include "hash_alg.h"
 

sound/soc/ux500/mop500_ab8500.c

@@ -17,8 +17,6 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
-
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/pcm.h>

sound/soc/ux500/ux500_msp_dai.c

@@ -21,8 +21,6 @@
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/platform_data/asoc-ux500-msp.h>
 
-#include <mach/hardware.h>
-
 #include <sound/soc.h>
 #include <sound/soc-dai.h>
 

sound/soc/ux500/ux500_msp_i2s.c

@@ -22,8 +22,6 @@
 #include <linux/of.h>
 #include <linux/platform_data/asoc-ux500-msp.h>
 
-#include <mach/hardware.h>
-
 #include <sound/soc.h>
 
 #include "ux500_msp_i2s.h"