Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Fix compile warning in wm8750.c
  ASoC: omap: Update e-mail address of Jarkko Nikula
  ASoC: SAMSUNG: Add I2S0 internal dma driver
  ASoC: Terminate WM8750 SPI device ID table
  ASoC: Add missing break in WM8994 probe
  ALSA: snd-usb-caiaq: Correct offset fields of outbound iso_frame_desc
  ALSA: azt3328 - adjust error handling code to include debugging code
  ALSA: hda - Add CONFIG_SND_HDA_POWER_SAVE to stac_vrefout_set()
  ALSA: usb-audio - Add quirk for BOSS Micro BR-80
  ASoC: Fix typo in wm8750 spi_ids
  ASoC: Fix warning in Speyside WM8962
  ASoC: Fix SPI driver binding for WM8987
  ASoC: Fix binding of WM8750 on Jive
  ASoC: WM8903: Free IRQ on device removal
  ASoC: Tegra: wm8903 machine driver: Allow re-insertion of module
  ASoC: Tegra: tegra_pcm_deallocate_dma_buffer: Don't OOPS

MAINTAINERS

@@ -4604,7 +4604,7 @@ F:	arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
 F:	arch/arm/mach-omap2/clockdomain44xx.c
 
 OMAP AUDIO SUPPORT
-M:	Jarkko Nikula <jhnikula@gmail.com>
+M:	Jarkko Nikula <jarkko.nikula@bitmer.com>
 L:	alsa-devel@alsa-project.org (subscribers-only)
 L:	linux-omap@vger.kernel.org
 S:	Maintained

include/sound/tlv320aic3x.h

 /*
  * Platform data for Texas Instruments TLV320AIC3x codec
  *
- * Author: Jarkko Nikula <jhnikula@gmail.com>
+ * Author: Jarkko Nikula <jarkko.nikula@bitmer.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

sound/pci/azt3328.c

@@ -2625,16 +2625,19 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 	int err;
 
 	snd_azf3328_dbgcallenter();
-	if (dev >= SNDRV_CARDS)
-		return -ENODEV;
+	if (dev >= SNDRV_CARDS) {
+		err = -ENODEV;
+		goto out;
+	}
 	if (!enable[dev]) {
 		dev++;
-		return -ENOENT;
+		err = -ENOENT;
+		goto out;
 	}
 
 	err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
 	if (err < 0)
-		return err;
+		goto out;
 
 	strcpy(card->driver, "AZF3328");
 	strcpy(card->shortname, "Aztech AZF3328 (PCI168)");

sound/pci/hda/patch_sigmatel.c

@@ -673,6 +673,7 @@ static int stac92xx_smux_enum_put(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+#ifdef CONFIG_SND_HDA_POWER_SAVE
 static int stac_vrefout_set(struct hda_codec *codec,
 					hda_nid_t nid, unsigned int new_vref)
 {
@@ -696,6 +697,7 @@ static int stac_vrefout_set(struct hda_codec *codec,
 
 	return 1;
 }
+#endif
 
 static unsigned int stac92xx_vref_set(struct hda_codec *codec,
 					hda_nid_t nid, unsigned int new_vref)

sound/soc/codecs/wm8750.c

@@ -778,11 +778,19 @@ static int __devexit wm8750_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct spi_device_id wm8750_spi_ids[] = {
+	{ "wm8750", 0 },
+	{ "wm8987", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, wm8750_spi_ids);
+
 static struct spi_driver wm8750_spi_driver = {
 	.driver = {
 		.name	= "wm8750-codec",
 		.owner	= THIS_MODULE,
 	},
+	.id_table	= wm8750_spi_ids,
 	.probe		= wm8750_spi_probe,
 	.remove		= __devexit_p(wm8750_spi_remove),
 };

sound/soc/codecs/wm8903.c

@@ -2046,8 +2046,13 @@ static int wm8903_probe(struct snd_soc_codec *codec)
 /* power down chip */
 static int wm8903_remove(struct snd_soc_codec *codec)
 {
+	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+
 	wm8903_free_gpio(codec);
 	wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	if (wm8903->irq)
+		free_irq(wm8903->irq, codec);
+
 	return 0;
 }
 

sound/soc/codecs/wm8994.c

@@ -2981,6 +2981,7 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 			wm8994->hubs.dcs_readback_mode = 1;
 			break;
 		}
+		break;
 
 	case WM8958:
 		wm8994->hubs.dcs_readback_mode = 1;

sound/soc/omap/n810.c

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Contact: Jarkko Nikula <jarkko.nikula@bitmer.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -402,6 +402,6 @@ static void __exit n810_soc_exit(void)
 module_init(n810_soc_init);
 module_exit(n810_soc_exit);
 
-MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
+MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>");
 MODULE_DESCRIPTION("ALSA SoC Nokia N810");
 MODULE_LICENSE("GPL");

sound/soc/omap/omap-mcbsp.c

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Contact: Jarkko Nikula <jarkko.nikula@bitmer.com>
  *          Peter Ujfalusi <peter.ujfalusi@ti.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -780,6 +780,6 @@ static void __exit snd_omap_mcbsp_exit(void)
 }
 module_exit(snd_omap_mcbsp_exit);
 
-MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
+MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>");
 MODULE_DESCRIPTION("OMAP I2S SoC Interface");
 MODULE_LICENSE("GPL");

sound/soc/omap/omap-mcbsp.h

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Contact: Jarkko Nikula <jarkko.nikula@bitmer.com>
  *          Peter Ujfalusi <peter.ujfalusi@ti.com>
  *
  * This program is free software; you can redistribute it and/or

sound/soc/omap/omap-pcm.c

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Contact: Jarkko Nikula <jarkko.nikula@bitmer.com>
  *          Peter Ujfalusi <peter.ujfalusi@ti.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -436,6 +436,6 @@ static void __exit snd_omap_pcm_exit(void)
 }
 module_exit(snd_omap_pcm_exit);
 
-MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
+MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@bitmer.com>");
 MODULE_DESCRIPTION("OMAP PCM DMA module");
 MODULE_LICENSE("GPL");

sound/soc/omap/omap-pcm.h

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Contact: Jarkko Nikula <jarkko.nikula@bitmer.com>
  *          Peter Ujfalusi <peter.ujfalusi@ti.com>
  *
  * This program is free software; you can redistribute it and/or

sound/soc/omap/rx51.c

@@ -5,7 +5,7 @@
  *
  * Contact: Peter Ujfalusi <peter.ujfalusi@ti.com>
  *          Eduardo Valentin <eduardo.valentin@nokia.com>
- *          Jarkko Nikula <jhnikula@gmail.com>
+ *          Jarkko Nikula <jarkko.nikula@bitmer.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License

sound/soc/samsung/Makefile

 # S3c24XX Platform Support
 snd-soc-s3c24xx-objs := dma.o
+snd-soc-idma-objs := idma.o
 snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
 snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
 snd-soc-ac97-objs := ac97.o
@@ -16,6 +17,7 @@ obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
 obj-$(CONFIG_SND_SAMSUNG_SPDIF) += snd-soc-samsung-spdif.o
 obj-$(CONFIG_SND_SAMSUNG_PCM) += snd-soc-pcm.o
 obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o
+obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-idma.o
 
 # S3C24XX Machine Support
 snd-soc-jive-wm8750-objs := jive_wm8750.o

sound/soc/samsung/idma.h

+/*
+ * sound/soc/samsung/idma.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
+ *		http://www.samsung.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __SND_SOC_SAMSUNG_IDMA_H_
+#define __SND_SOC_SAMSUNG_IDMA_H_
+
+extern void idma_reg_addr_init(void *regs, dma_addr_t addr);
+
+/* dma_state */
+#define LPAM_DMA_STOP	0
+#define LPAM_DMA_START	1
+
+#define MAX_IDMA_PERIOD (128 * 1024)
+#define MAX_IDMA_BUFFER (160 * 1024)
+
+#endif /* __SND_SOC_SAMSUNG_IDMA_H_ */

sound/soc/samsung/jive_wm8750.c

@@ -131,7 +131,7 @@ static struct snd_soc_dai_link jive_dai = {
 	.cpu_dai_name	= "s3c2412-i2s",
 	.codec_dai_name = "wm8750-hifi",
 	.platform_name	= "samsung-audio",
-	.codec_name	= "wm8750-codec.0-0x1a",
+	.codec_name	= "wm8750-codec.0-001a",
 	.init		= jive_wm8750_init,
 	.ops		= &jive_ops,
 };

sound/soc/samsung/speyside_wm8962.c

@@ -37,7 +37,7 @@ static int speyside_wm8962_set_bias_level(struct snd_soc_card *card,
 						     44100 * 256,
 						     SND_SOC_CLOCK_IN);
 			if (ret < 0) {
-				pr_err("Failed to set SYSCLK: %d\n");
+				pr_err("Failed to set SYSCLK: %d\n", ret);
 				return ret;
 			}
 		}

sound/soc/tegra/tegra_pcm.c

@@ -309,9 +309,14 @@ static int tegra_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
 
 static void tegra_pcm_deallocate_dma_buffer(struct snd_pcm *pcm, int stream)
 {
-	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
-	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+
+	substream = pcm->streams[stream].substream;
+	if (!substream)
+		return;
 
+	buf = &substream->dma_buffer;
 	if (!buf->area)
 		return;
 

sound/soc/tegra/tegra_wm8903.c

@@ -56,6 +56,7 @@
 #define GPIO_HP_MUTE    BIT(1)
 #define GPIO_INT_MIC_EN BIT(2)
 #define GPIO_EXT_MIC_EN BIT(3)
+#define GPIO_HP_DET     BIT(4)
 
 struct tegra_wm8903 {
 	struct tegra_asoc_utils_data util_data;
@@ -304,6 +305,7 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
 		snd_soc_jack_add_gpios(&tegra_wm8903_hp_jack,
 					1,
 					&tegra_wm8903_hp_jack_gpio);
+		machine->gpio_requested |= GPIO_HP_DET;
 	}
 
 	snd_soc_jack_new(codec, "Mic Jack", SND_JACK_MICROPHONE,
@@ -429,10 +431,10 @@ static int __devexit tegra_wm8903_driver_remove(struct platform_device *pdev)
 	struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card);
 	struct tegra_wm8903_platform_data *pdata = machine->pdata;
 
-	snd_soc_unregister_card(card);
-
-	tegra_asoc_utils_fini(&machine->util_data);
-
+	if (machine->gpio_requested & GPIO_HP_DET)
+		snd_soc_jack_free_gpios(&tegra_wm8903_hp_jack,
+					1,
+					&tegra_wm8903_hp_jack_gpio);
 	if (machine->gpio_requested & GPIO_EXT_MIC_EN)
 		gpio_free(pdata->gpio_ext_mic_en);
 	if (machine->gpio_requested & GPIO_INT_MIC_EN)
@@ -441,6 +443,11 @@ static int __devexit tegra_wm8903_driver_remove(struct platform_device *pdev)
 		gpio_free(pdata->gpio_hp_mute);
 	if (machine->gpio_requested & GPIO_SPKR_EN)
 		gpio_free(pdata->gpio_spkr_en);
+	machine->gpio_requested = 0;
+
+	snd_soc_unregister_card(card);
+
+	tegra_asoc_utils_fini(&machine->util_data);
 
 	kfree(machine);
 

sound/usb/caiaq/audio.c

@@ -614,6 +614,7 @@ static void read_completed(struct urb *urb)
 	struct snd_usb_caiaqdev *dev;
 	struct urb *out;
 	int frame, len, send_it = 0, outframe = 0;
+	size_t offset = 0;
 
 	if (urb->status || !info)
 		return;
@@ -634,7 +635,8 @@ static void read_completed(struct urb *urb)
 		len = urb->iso_frame_desc[outframe].actual_length;
 		out->iso_frame_desc[outframe].length = len;
 		out->iso_frame_desc[outframe].actual_length = 0;
-		out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame;
+		out->iso_frame_desc[outframe].offset = offset;
+		offset += len;
 
 		if (len > 0) {
 			spin_lock(&dev->spinlock);
@@ -650,7 +652,7 @@ static void read_completed(struct urb *urb)
 	}
 
 	if (send_it) {
-		out->number_of_packets = FRAMES_PER_URB;
+		out->number_of_packets = outframe;
 		out->transfer_flags = URB_ISO_ASAP;
 		usb_submit_urb(out, GFP_ATOMIC);
 	}

sound/usb/quirks-table.h

@@ -1707,6 +1707,40 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 		}
 	}
 },
+{
+	USB_DEVICE(0x0582, 0x0130),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		/* .vendor_name = "BOSS", */
+		/* .product_name = "MICRO BR-80", */
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_IGNORE_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 3,
+				.type = QUIRK_MIDI_FIXED_ENDPOINT,
+				.data = & (const struct snd_usb_midi_endpoint_info) {
+					.out_cables = 0x0001,
+					.in_cables  = 0x0001
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 /* Guillemot devices */
 {