igb: Do not call netif_device_detach() when PCIe link goes missing
When the driver notices that PCIe link is gone by reading 0xffffffff from a register it clears hw->hw_addr and then calls netif_device_detach(). This happens when the PCIe device is physically unplugged for example the user disconnected the Thunderbolt cable. However, netif_device_detach() prevents netif_unregister() from bringing the device down properly including tearing down MSI-X vectors. This triggers following crash during the driver removal: igb 0000:0b:00.0 enp11s0f0: PCIe link lost, device now detached ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:352! invalid opcode: 0000 [#1] PREEMPT SMP PTI ... Call Trace: pci_disable_msix+0xc9/0xf0 igb_reset_interrupt_capability+0x58/0x60 [igb] igb_remove+0x90/0x100 [igb] pci_device_remove+0x31/0xa0 device_release_driver_internal+0x152/0x210 pci_stop_bus_device+0x78/0xa0 pci_stop_bus_device+0x38/0xa0 pci_stop_bus_device+0x38/0xa0 pci_stop_bus_device+0x26/0xa0 pci_stop_bus_device+0x38/0xa0 pci_stop_and_remove_bus_device+0x9/0x20 trim_stale_devices+0xee/0x130 ? _raw_spin_unlock_irqrestore+0xf/0x30 trim_stale_devices+0x8f/0x130 ? _raw_spin_unlock_irqrestore+0xf/0x30 trim_stale_devices+0xa1/0x130 ? get_slot_status+0x8b/0xc0 acpiphp_check_bridge.part.7+0xf9/0x140 acpiphp_hotplug_notify+0x170/0x1f0 ... To prevent the crash do not call netif_device_detach() in igb_rd32(). This should be fine because hw->hw_addr is set to NULL preventing future hardware access of the now missing device. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198181Reported-by: Ferenc Boldog <ferenc.boldog@gmail.com> Reported-by: Nikolay Bogoychev <nheart@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Showing
Please register or sign in to comment