[ALSA] Add snd-miro driver

Added snd-miro driver for miroSOUND PCM by Martin Langer.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1014,6 +1014,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-miro
+  ---------------
+
+    Module for Miro soundcards: miroSOUND PCM 1 pro, 
+				miroSOUND PCM 12,
+				miroSOUND PCM 20 Radio.
+
+    port	- Port # (0x530,0x604,0xe80,0xf40)
+    irq		- IRQ # (5,7,9,10,11)
+    dma1	- 1st dma # (0,1,3)
+    dma2	- 2nd dma # (0,1)
+    mpu_port	- MPU-401 port # (0x300,0x310,0x320,0x330)
+    mpu_irq	- MPU-401 irq # (5,7,9,10)
+    fm_port	- FM Port # (0x388)
+    wss		- enable WSS mode
+    ide		- enable onboard ide support
+
   Module snd-mixart
   -----------------
 

sound/isa/Kconfig

@@ -292,6 +292,20 @@ config SND_OPTI93X
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-opti93x.
 
+config SND_MIRO
+	tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver"
+	depends on SND
+	select SND_OPL4_LIB
+	select SND_CS4231_LIB
+	select SND_MPU401_UART
+	select SND_PCM
+	help
+	  Say 'Y' or 'M' to include support for Miro miroSOUND PCM1 pro, 
+	  miroSOUND PCM12 and miroSOUND PCM20 Radio soundcards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called snd-miro.
+
 config SND_SB8
 	tristate "Sound Blaster 1.0/2.0/Pro (8-bit)"
 	depends on SND

sound/isa/opti9xx/Makefile

@@ -6,8 +6,10 @@
 snd-opti92x-ad1848-objs := opti92x-ad1848.o
 snd-opti92x-cs4231-objs := opti92x-cs4231.o
 snd-opti93x-objs := opti93x.o
+snd-miro-objs := miro.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_OPTI92X_AD1848) += snd-opti92x-ad1848.o
 obj-$(CONFIG_SND_OPTI92X_CS4231) += snd-opti92x-cs4231.o
 obj-$(CONFIG_SND_OPTI93X) += snd-opti93x.o
+obj-$(CONFIG_SND_MIRO) += snd-miro.o

sound/isa/opti9xx/miro.h

+#ifndef _MIRO_H_
+#define _MIRO_H_
+
+#define ACI_REG_COMMAND		0	/* write register offset */
+#define ACI_REG_STATUS		1	/* read register offset */
+#define ACI_REG_BUSY		2	/* busy register offset */
+#define ACI_REG_RDS		2	/* PCM20: RDS register offset */
+#define ACI_MINTIME		500	/* ACI time out limit */
+
+#define ACI_SET_MUTE		0x0d
+#define ACI_SET_POWERAMP	0x0f
+#define ACI_SET_TUNERMUTE	0xa3
+#define ACI_SET_TUNERMONO	0xa4
+#define ACI_SET_IDE		0xd0
+#define ACI_SET_WSS		0xd1
+#define ACI_SET_SOLOMODE	0xd2
+#define ACI_SET_PREAMP		0x03
+#define ACI_GET_PREAMP		0x21
+#define ACI_WRITE_TUNE		0xa7
+#define ACI_READ_TUNERSTEREO	0xa8
+#define ACI_READ_TUNERSTATION	0xa9
+#define ACI_READ_VERSION	0xf1
+#define ACI_READ_IDCODE		0xf2
+#define ACI_INIT		0xff
+#define ACI_STATUS		0xf0
+#define ACI_S_GENERAL		0x00
+#define ACI_ERROR_OP		0xdf
+
+/* ACI Mixer */
+
+/* These are the values for the right channel GET registers.
+   Add an offset of 0x01 for the left channel register.
+   (left=right+0x01) */
+
+#define ACI_GET_MASTER		0x03
+#define ACI_GET_MIC		0x05
+#define ACI_GET_LINE		0x07
+#define ACI_GET_CD		0x09
+#define ACI_GET_SYNTH		0x0b
+#define ACI_GET_PCM		0x0d
+#define ACI_GET_LINE1		0x10	/* Radio on PCM20 */
+#define ACI_GET_LINE2		0x12
+
+#define ACI_GET_EQ1		0x22	/* from Bass ... */
+#define ACI_GET_EQ2		0x24
+#define ACI_GET_EQ3		0x26
+#define ACI_GET_EQ4		0x28
+#define ACI_GET_EQ5		0x2a
+#define ACI_GET_EQ6		0x2c
+#define ACI_GET_EQ7		0x2e	/* ... to Treble */
+
+/* And these are the values for the right channel SET registers.
+   For left channel access you have to add an offset of 0x08.
+   MASTER is an exception, which needs an offset of 0x01 */
+
+#define ACI_SET_MASTER		0x00
+#define ACI_SET_MIC		0x30
+#define ACI_SET_LINE		0x31
+#define ACI_SET_CD		0x34
+#define ACI_SET_SYNTH		0x33
+#define ACI_SET_PCM		0x32
+#define ACI_SET_LINE1		0x35	/* Radio on PCM20 */
+#define ACI_SET_LINE2		0x36
+
+#define ACI_SET_EQ1		0x40	/* from Bass ... */
+#define ACI_SET_EQ2		0x41
+#define ACI_SET_EQ3		0x42
+#define ACI_SET_EQ4		0x43
+#define ACI_SET_EQ5		0x44
+#define ACI_SET_EQ6		0x45
+#define ACI_SET_EQ7		0x46	/* ... to Treble */
+
+#endif  /* _MIRO_H_ */