Commit 184f1938 authored by Sean MacLennan's avatar Sean MacLennan Committed by Greg Kroah-Hartman

staging/rtl8192e: Add lib80211.h to rtllib.h

Add lib80211.h header file to rtllib.h and get it compiling.
Signed-off-by: default avatarSean MacLennan <seanm@seanm.ca>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 70cd5337
......@@ -42,6 +42,7 @@
#include <linux/netdevice.h>
#include <linux/if_arp.h> /* ARPHRD_ETHER */
#include <net/lib80211.h>
#define MAX_PRECMD_CNT 16
#define MAX_RFDEPENDCMD_CNT 16
......@@ -870,69 +871,6 @@ enum _REG_PREAMBLE_MODE {
#define WLAN_ERP_USE_PROTECTION (1<<1)
#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
/* Status codes */
enum rtllib_statuscode {
WLAN_STATUS_SUCCESS = 0,
WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
WLAN_STATUS_CAPS_UNSUPPORTED = 10,
WLAN_STATUS_REASSOC_NO_ASSOC = 11,
WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
WLAN_STATUS_CHALLENGE_FAIL = 15,
WLAN_STATUS_AUTH_TIMEOUT = 16,
WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
WLAN_STATUS_ASSOC_DENIED_RATES = 18,
/* 802.11b */
WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
/* 802.11h */
WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
/* 802.11g */
WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
/* 802.11i */
WLAN_STATUS_INVALID_IE = 40,
WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
WLAN_STATUS_INVALID_AKMP = 43,
WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
};
/* Reason codes */
enum rtllib_reasoncode {
WLAN_REASON_UNSPECIFIED = 1,
WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
WLAN_REASON_DEAUTH_LEAVING = 3,
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
WLAN_REASON_DISASSOC_AP_BUSY = 5,
WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
/* 802.11h */
WLAN_REASON_DISASSOC_BAD_POWER = 10,
WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
/* 802.11i */
WLAN_REASON_INVALID_IE = 13,
WLAN_REASON_MIC_FAILURE = 14,
WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
WLAN_REASON_IE_DIFFERENT = 17,
WLAN_REASON_INVALID_GROUP_CIPHER = 18,
WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
WLAN_REASON_INVALID_AKMP = 20,
WLAN_REASON_UNSUPP_RSN_VERSION = 21,
WLAN_REASON_INVALID_RSN_IE_CAP = 22,
WLAN_REASON_IEEE8021X_FAILED = 23,
WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
};
#define RTLLIB_STATMASK_SIGNAL (1<<0)
#define RTLLIB_STATMASK_RSSI (1<<1)
#define RTLLIB_STATMASK_NOISE (1<<2)
......@@ -1146,7 +1084,6 @@ struct rtllib_device;
#define SEC_ALG_TKIP 2
#define SEC_ALG_CCMP 4
#define WEP_KEYS 4
#define WEP_KEY_LEN 13
#define SCM_KEY_LEN 32
#define SCM_TEMPORAL_KEY_LENGTH 16
......@@ -1158,8 +1095,8 @@ struct rtllib_security {
auth_algo:4,
unicast_uses_group:1,
encrypt:1;
u8 key_sizes[WEP_KEYS];
u8 keys[WEP_KEYS][SCM_KEY_LEN];
u8 key_sizes[NUM_WEP_KEYS];
u8 keys[NUM_WEP_KEYS][SCM_KEY_LEN];
u8 level;
u16 flags;
} __packed;
......@@ -2252,7 +2189,7 @@ struct rtllib_device {
u16 pairwise_key_type;
u16 group_key_type;
struct list_head crypt_deinit_list;
struct rtllib_crypt_data *crypt[WEP_KEYS];
struct rtllib_crypt_data *crypt[NUM_WEP_KEYS];
int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
struct sw_cam_table swcamtable[TOTAL_CAM_ENTRY];
......
......@@ -199,7 +199,7 @@ void free_rtllib(struct net_device *dev)
del_timer_sync(&ieee->crypt_deinit_timer);
rtllib_crypt_deinit_entries(ieee, 1);
for (i = 0; i < WEP_KEYS; i++) {
for (i = 0; i < NUM_WEP_KEYS; i++) {
struct rtllib_crypt_data *crypt = ieee->crypt[i];
if (crypt) {
if (crypt->ops)
......
......@@ -3365,7 +3365,7 @@ static int rtllib_wpa_set_encryption(struct rtllib_device *ieee,
if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
if (param->u.crypt.idx >= WEP_KEYS)
if (param->u.crypt.idx >= NUM_WEP_KEYS)
return -EINVAL;
crypt = &ieee->crypt[param->u.crypt.idx];
} else {
......
......@@ -312,7 +312,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
key = erq->flags & IW_ENCODE_INDEX;
if (key) {
if (key > WEP_KEYS)
if (key > NUM_WEP_KEYS)
return -EINVAL;
key--;
key_provided = 1;
......@@ -334,7 +334,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
/* Check all the keys to see if any are still configured,
* and if no key index was provided, de-init them all */
for (i = 0; i < WEP_KEYS; i++) {
for (i = 0; i < NUM_WEP_KEYS; i++) {
if (ieee->crypt[i] != NULL) {
if (key_provided)
break;
......@@ -343,7 +343,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
}
}
if (i == WEP_KEYS) {
if (i == NUM_WEP_KEYS) {
sec.enabled = 0;
sec.level = SEC_LEVEL_0;
sec.flags |= SEC_ENABLED | SEC_LEVEL;
......@@ -486,7 +486,7 @@ int rtllib_wx_get_encode(struct rtllib_device *ieee,
key = erq->flags & IW_ENCODE_INDEX;
if (key) {
if (key > WEP_KEYS)
if (key > NUM_WEP_KEYS)
return -EINVAL;
key--;
} else {
......@@ -534,7 +534,7 @@ int rtllib_wx_set_encode_ext(struct rtllib_device *ieee,
};
idx = encoding->flags & IW_ENCODE_INDEX;
if (idx) {
if (idx < 1 || idx > WEP_KEYS)
if (idx < 1 || idx > NUM_WEP_KEYS)
return -EINVAL;
idx--;
} else{
......@@ -559,11 +559,11 @@ int rtllib_wx_set_encode_ext(struct rtllib_device *ieee,
if (*crypt)
rtllib_crypt_delayed_deinit(ieee, crypt);
for (i = 0; i < WEP_KEYS; i++) {
for (i = 0; i < NUM_WEP_KEYS; i++) {
if (ieee->crypt[i] != NULL)
break;
}
if (i == WEP_KEYS) {
if (i == NUM_WEP_KEYS) {
sec.enabled = 0;
sec.level = SEC_LEVEL_0;
sec.flags |= SEC_LEVEL;
......@@ -692,7 +692,7 @@ int rtllib_wx_get_encode_ext(struct rtllib_device *ieee,
idx = encoding->flags & IW_ENCODE_INDEX;
if (idx) {
if (idx < 1 || idx > WEP_KEYS)
if (idx < 1 || idx > NUM_WEP_KEYS)
return -EINVAL;
idx--;
} else {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment