Commit 194a8352 authored by Jiaxun Yang's avatar Jiaxun Yang Committed by Thomas Bogendoerfer

MIPS: Loongson: Move arch cflags to MIPS top level Makefile

Arch cflags should be independent to Platform.
Signed-off-by: default avatarJiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: default avatarThomas Bogendoerfer <tsbogend@alpha.franken.de>
parent b6007ff8
...@@ -181,9 +181,47 @@ endif ...@@ -181,9 +181,47 @@ endif
cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap
cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -Wa,--trap
cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -Wa,--trap
# Some -march= flags enable MMI instructions, and GCC complains about that
# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi)
ifdef CONFIG_CPU_LOONGSON64
cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap
cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
endif
cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi)
cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
endif
#
# Some versions of binutils, not currently mainline as of 2019/02/04, support
# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
# description).
#
# We disable this in order to prevent the assembler meddling with the
# instruction that labels refer to, ie. if we label an ll instruction:
#
# 1: ll v0, 0(a0)
#
# ...then with the assembler fix applied the label may actually point at a sync
# instruction inserted by the assembler, and if we were using the label in an
# exception table the table would no longer contain the address of the ll
# instruction.
#
# Avoid this by explicitly disabling that assembler behaviour. If upstream
# binutils does not merge support for the flag then we can revisit & remove
# this later - for now it ensures vendor toolchains don't cause problems.
#
cflags-$(CONFIG_CPU_LOONGSON64) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
# For smartmips configurations, there are hundreds of warnings due to ISA overrides # For smartmips configurations, there are hundreds of warnings due to ISA overrides
# in assembly and header files. smartmips is only supported for MIPS32r1 onwards # in assembly and header files. smartmips is only supported for MIPS32r1 onwards
......
...@@ -2,41 +2,6 @@ ...@@ -2,41 +2,6 @@
# Loongson Processors' Support # Loongson Processors' Support
# #
cflags-$(CONFIG_CPU_LOONGSON2EF) += -Wa,--trap
cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e
cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f
#
# Some versions of binutils, not currently mainline as of 2019/02/04, support
# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
# description).
#
# We disable this in order to prevent the assembler meddling with the
# instruction that labels refer to, ie. if we label an ll instruction:
#
# 1: ll v0, 0(a0)
#
# ...then with the assembler fix applied the label may actually point at a sync
# instruction inserted by the assembler, and if we were using the label in an
# exception table the table would no longer contain the address of the ll
# instruction.
#
# Avoid this by explicitly disabling that assembler behaviour. If upstream
# binutils does not merge support for the flag then we can revisit & remove
# this later - for now it ensures vendor toolchains don't cause problems.
#
cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
# Enable the workarounds for Loongson2f
ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
endif
# Some -march= flags enable MMI instructions, and GCC complains about that
# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
cflags-y += $(call cc-option,-mno-loongson-mmi)
# #
# Loongson Machines' Support # Loongson Machines' Support
# #
......
#
# Loongson Processors' Support
#
cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap
ifdef CONFIG_CPU_LOONGSON64
cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
endif
# Some -march= flags enable MMI instructions, and GCC complains about that
# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
cflags-y += $(call cc-option,-mno-loongson-mmi)
# #
# Loongson Machines' Support # Loongson Machines' Support
# #
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment