MIPS: Netlogic: Remove XLR early serial setup

The early serial code is not needed because we already have early
printk support provided by common/earlycons.c

This change also fixes the following build error that occurs when
CONFIG_SERIAL_8250 is not configured for Netlogic XLR boards:

arch/mips/built-in.o: In function `nlm_early_serial_setup':
setup.c:(.init.text+0x274): undefined reference to `early_serial_setup'
make: *** [vmlinux] Error 1
Reported-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6083/

arch/mips/include/asm/netlogic/xlr/xlr.h

@@ -35,11 +35,6 @@
 #ifndef _ASM_NLM_XLR_H
 #define _ASM_NLM_XLR_H
 
-/* Platform UART functions */
-struct uart_port;
-unsigned int nlm_xlr_uart_in(struct uart_port *, int);
-void nlm_xlr_uart_out(struct uart_port *, int, int);
-
 /* SMP helpers */
 void xlr_wakeup_secondary_cpus(void);
 

arch/mips/netlogic/xlr/platform.c

@@ -23,7 +23,7 @@
 #include <asm/netlogic/xlr/pic.h>
 #include <asm/netlogic/xlr/xlr.h>
 
-unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
+static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
 {
 	uint64_t uartbase;
 	unsigned int value;
@@ -41,7 +41,7 @@ unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
 	return value;
 }
 
-void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
+static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
 {
 	uint64_t uartbase;
 

arch/mips/netlogic/xlr/setup.c

@@ -60,25 +60,6 @@ unsigned int  nlm_threads_per_core = 1;
 struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
 cpumask_t nlm_cpumask = CPU_MASK_CPU0;
 
-static void __init nlm_early_serial_setup(void)
-{
-	struct uart_port s;
-	unsigned long uart_base;
-
-	uart_base = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
-	memset(&s, 0, sizeof(s));
-	s.flags		= ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
-	s.iotype	= UPIO_MEM32;
-	s.regshift	= 2;
-	s.irq		= PIC_UART_0_IRQ;
-	s.uartclk	= PIC_CLK_HZ;
-	s.serial_in	= nlm_xlr_uart_in;
-	s.serial_out	= nlm_xlr_uart_out;
-	s.mapbase	= uart_base;
-	s.membase	= (unsigned char __iomem *)uart_base;
-	early_serial_setup(&s);
-}
-
 static void nlm_linux_exit(void)
 {
 	uint64_t gpiobase;
@@ -215,7 +196,6 @@ void __init prom_init(void)
 	memcpy(reset_vec, (void *)nlm_reset_entry,
 			(nlm_reset_entry_end - nlm_reset_entry));
 
-	nlm_early_serial_setup();
 	build_arcs_cmdline(argv);
 	prom_add_memory();