Commit 194e57fd authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This patch set is a lot of driver updates for qla4xxx, bfa, hpsa,
  qla2xxx.  It also removes the aic7xxx_old driver (which has been
  deprecated for nearly a decade) and adds support for deadlines in
  error handling"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (75 commits)
  [SCSI] hpsa: allow SCSI mid layer to handle unit attention
  [SCSI] hpsa: do not require board "not ready" status after hard reset
  [SCSI] hpsa: enable unit attention reporting
  [SCSI] hpsa: rename scsi prefetch field
  [SCSI] hpsa: use workqueue instead of kernel thread for lockup detection
  [SCSI] ipr: increase dump size in ipr driver
  [SCSI] mac_scsi: Fix crash on out of memory
  [SCSI] st: fix enlarge_buffer
  [SCSI] qla1280: Annotate timer on stack so object debug does not complain
  [SCSI] qla4xxx: Update driver version to 5.04.00-k3
  [SCSI] qla4xxx: Recreate chap data list during get chap operation
  [SCSI] qla4xxx: Add support for ISCSI_PARAM_LOCAL_IPADDR sysfs attr
  [SCSI] libiscsi: Add local_ipaddr parameter in iscsi_conn struct
  [SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for iscsi_connection
  [SCSI] qla4xxx: Add host statistics support
  [SCSI] scsi_transport_iscsi: Add host statistics support
  [SCSI] qla4xxx: Added support for Diagnostics MBOX command
  [SCSI] bfa: Driver version upgrade to 3.2.23.0
  [SCSI] bfa: change FC_ELS_TOV to 20sec
  [SCSI] bfa: Observed auto D-port mode instead of manual
  ...
parents e1ba8459 4b1a9a5e
......@@ -42,8 +42,6 @@ aic79xx.txt
- Adaptec Ultra320 SCSI host adapters
aic7xxx.txt
- info on driver for Adaptec controllers
aic7xxx_old.txt
- info on driver for Adaptec controllers, old generation
arcmsr_spec.txt
- ARECA FIRMWARE SPEC (for IOP331 adapter)
dc395x.txt
......
This diff is collapsed.
......@@ -42,20 +42,14 @@ discussion.
Once LLDD gets hold of a scmd, either the LLDD will complete the
command by calling scsi_done callback passed from midlayer when
invoking hostt->queuecommand() or SCSI midlayer will time it out.
invoking hostt->queuecommand() or the block layer will time it out.
[1-2-1] Completing a scmd w/ scsi_done
For all non-EH commands, scsi_done() is the completion callback. It
does the following.
1. Delete timeout timer. If it fails, it means that timeout timer
has expired and is going to finish the command. Just return.
2. Link scmd to per-cpu scsi_done_q using scmd->en_entry
3. Raise SCSI_SOFTIRQ
just calls blk_complete_request() to delete the block layer timer and
raise SCSI_SOFTIRQ
SCSI_SOFTIRQ handler scsi_softirq calls scsi_decide_disposition() to
determine what to do with the command. scsi_decide_disposition()
......@@ -64,10 +58,12 @@ with the command.
- SUCCESS
scsi_finish_command() is invoked for the command. The
function does some maintenance choirs and notify completion by
calling scmd->done() callback, which, for fs requests, would
be HLD completion callback - sd:sd_rw_intr, sr:rw_intr,
st:st_intr.
function does some maintenance chores and then calls
scsi_io_completion() to finish the I/O.
scsi_io_completion() then notifies the block layer on
the completed request by calling blk_end_request and
friends or figures out what to do with the remainder
of the data in case of an error.
- NEEDS_RETRY
- ADD_TO_MLQUEUE
......@@ -86,33 +82,45 @@ function
1. invokes optional hostt->eh_timed_out() callback. Return value can
be one of
- EH_HANDLED
This indicates that eh_timed_out() dealt with the timeout. The
scmd is passed to __scsi_done() and thus linked into per-cpu
scsi_done_q. Normal command completion described in [1-2-1]
follows.
- BLK_EH_HANDLED
This indicates that eh_timed_out() dealt with the timeout.
The command is passed back to the block layer and completed
via __blk_complete_requests().
*NOTE* After returning BLK_EH_HANDLED the SCSI layer is
assumed to be finished with the command, and no other
functions from the SCSI layer will be called. So this
should typically only be returned if the eh_timed_out()
handler raced with normal completion.
- EH_RESET_TIMER
- BLK_EH_RESET_TIMER
This indicates that more time is required to finish the
command. Timer is restarted. This action is counted as a
retry and only allowed scmd->allowed + 1(!) times. Once the
limit is reached, action for EH_NOT_HANDLED is taken instead.
limit is reached, action for BLK_EH_NOT_HANDLED is taken instead.
*NOTE* This action is racy as the LLDD could finish the scmd
after the timeout has expired but before it's added back. In
such cases, scsi_done() would think that timeout has occurred
and return without doing anything. We lose completion and the
command will time out again.
- EH_NOT_HANDLED
This is the same as when eh_timed_out() callback doesn't exist.
- BLK_EH_NOT_HANDLED
eh_timed_out() callback did not handle the command.
Step #2 is taken.
2. If the host supports asynchronous completion (as indicated by the
no_async_abort setting in the host template) scsi_abort_command()
is invoked to schedule an asynchrous abort. If that fails
Step #3 is taken.
2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the
command. See [1-3] for more information.
[1-3] Asynchronous command aborts
After a timeout occurs a command abort is scheduled from
scsi_abort_command(). If the abort is successful the command
will either be retried (if the number of retries is not exhausted)
or terminated with DID_TIME_OUT.
Otherwise scsi_eh_scmd_add() is invoked for the command.
See [1-4] for more information.
[1-3] How EH takes over
[1-4] How EH takes over
scmds enter EH via scsi_eh_scmd_add(), which does the following.
......@@ -320,7 +328,8 @@ scmd->allowed.
<<scsi_eh_abort_cmds>>
This action is taken for each timed out command.
This action is taken for each timed out command when
no_async_abort is enabled in the host template.
hostt->eh_abort_handler() is invoked for each scmd. The
handler returns SUCCESS if it has succeeded to make LLDD and
all related hardware forget about the scmd.
......
......@@ -882,8 +882,11 @@ Details:
*
* Calling context: kernel thread
*
* Notes: Invoked from scsi_eh thread. No other commands will be
* queued on current host during eh.
* Notes: If 'no_async_abort' is defined this callback
* will be invoked from scsi_eh thread. No other commands
* will then be queued on current host during eh.
* Otherwise it will be called whenever scsi_times_out()
* is called due to a command timeout.
*
* Optionally defined in: LLD
**/
......@@ -1257,6 +1260,8 @@ of interest:
address space
use_clustering - 1=>SCSI commands in mid level's queue can be merged,
0=>disallow SCSI command merging
no_async_abort - 1=>Asynchronous aborts are not supported
0=>Timed-out commands will be aborted asynchronously
hostt - pointer to driver's struct scsi_host_template from which
this struct Scsi_Host instance was spawned
hostt->proc_name - name of LLD. This is the driver name that sysfs uses
......
......@@ -484,7 +484,6 @@ M: Hannes Reinecke <hare@suse.de>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/aic7xxx/
F: drivers/scsi/aic7xxx_old/
AIMSLAB FM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
......@@ -6931,8 +6930,7 @@ S: Maintained
F: drivers/scsi/qla1280.[ch]
QLOGIC QLA2XXX FC-SCSI DRIVER
M: Andrew Vasquez <andrew.vasquez@qlogic.com>
M: linux-driver@qlogic.com
M: qla2xxx-upstream@qlogic.com
L: linux-scsi@vger.kernel.org
S: Supported
F: Documentation/scsi/LICENSE.qla2xxx
......@@ -7492,8 +7490,9 @@ F: include/scsi/srp.h
SCSI SG DRIVER
M: Doug Gilbert <dgilbert@interlog.com>
L: linux-scsi@vger.kernel.org
W: http://www.torque.net/sg
W: http://sg.danny.cz/sg
S: Maintained
F: Documentation/scsi/scsi-generic.txt
F: drivers/scsi/sg.c
F: include/scsi/sg.h
......
......@@ -499,47 +499,6 @@ config SCSI_AACRAID
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
config SCSI_AIC7XXX_OLD
tristate "Adaptec AIC7xxx support (old driver)"
depends on (ISA || EISA || PCI ) && SCSI
help
WARNING This driver is an older aic7xxx driver and is no longer
under active development. Adaptec, Inc. is writing a new driver to
take the place of this one, and it is recommended that whenever
possible, people should use the new Adaptec written driver instead
of this one. This driver will eventually be phased out entirely.
This is support for the various aic7xxx based Adaptec SCSI
controllers. These include the 274x EISA cards; 284x VLB cards;
2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
motherboard based SCSI controllers from Adaptec. It does not support
the AAA-13x RAID controllers from Adaptec, nor will it likely ever
support them. It does not support the 2920 cards from Adaptec that
use the Future Domain SCSI controller chip. For those cards, you
need the "Future Domain 16xx SCSI support" driver.
In general, if the controller is based on an Adaptec SCSI controller
chip from the aic777x series or the aic78xx series, this driver
should work. The only exception is the 7810 which is specifically
not supported (that's the RAID controller chip on the AAA-13x
cards).
Note that the AHA2920 SCSI host adapter is *not* supported by this
driver; choose "Future Domain 16xx SCSI support" instead if you have
one of those.
Information on the configuration options for this controller can be
found by checking the help file for each of the available
configuration options. You should read
<file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
contacting the maintainer with any questions. The SCSI-HOWTO,
available from <http://www.tldp.org/docs.html#howto>, can also
be of great help.
To compile this driver as a module, choose M here: the
module will be called aic7xxx_old.
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig"
source "drivers/scsi/mvsas/Kconfig"
......
......@@ -70,7 +70,6 @@ obj-$(CONFIG_SCSI_AHA1740) += aha1740.o
obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/
obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
obj-$(CONFIG_SCSI_PM8001) += pm8001/
obj-$(CONFIG_SCSI_ISCI) += isci/
......
This diff is collapsed.
/*+M*************************************************************************
* Adaptec AIC7xxx device driver for Linux.
*
* Copyright (c) 1994 John Aycock
* The University of Calgary Department of Computer Science.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* $Id: aic7xxx.h,v 3.2 1996/07/23 03:37:26 deang Exp $
*-M*************************************************************************/
#ifndef _aic7xxx_h
#define _aic7xxx_h
#define AIC7XXX_H_VERSION "5.2.0"
#endif /* _aic7xxx_h */
This diff is collapsed.
This diff is collapsed.
/*+M*************************************************************************
* Adaptec AIC7xxx device driver proc support for Linux.
*
* Copyright (c) 1995, 1996 Dean W. Gehnert
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* ----------------------------------------------------------------
* o Modified from the EATA-DMA /proc support.
* o Additional support for device block statistics provided by
* Matthew Jacob.
* o Correction of overflow by Heinz Mauelshagen
* o Adittional corrections by Doug Ledford
*
* Dean W. Gehnert, deang@teleport.com, 05/01/96
*
* $Id: aic7xxx_proc.c,v 4.1 1997/06/97 08:23:42 deang Exp $
*-M*************************************************************************/
#define HDRB \
" 0 - 4K 4 - 16K 16 - 64K 64 - 256K 256K - 1M 1M+"
/*+F*************************************************************************
* Function:
* aic7xxx_show_info
*
* Description:
* Return information to handle /proc support for the driver.
*-F*************************************************************************/
int
aic7xxx_show_info(struct seq_file *m, struct Scsi_Host *HBAptr)
{
struct aic7xxx_host *p;
struct aic_dev_data *aic_dev;
struct scsi_device *sdptr;
unsigned char i;
unsigned char tindex;
for(p=first_aic7xxx; p && p->host != HBAptr; p=p->next)
;
if (!p)
{
seq_printf(m, "Can't find adapter for host number %d\n", HBAptr->host_no);
return 0;
}
p = (struct aic7xxx_host *) HBAptr->hostdata;
seq_printf(m, "Adaptec AIC7xxx driver version: ");
seq_printf(m, "%s/", AIC7XXX_C_VERSION);
seq_printf(m, "%s", AIC7XXX_H_VERSION);
seq_printf(m, "\n");
seq_printf(m, "Adapter Configuration:\n");
seq_printf(m, " SCSI Adapter: %s\n",
board_names[p->board_name_index]);
if (p->flags & AHC_TWIN)
seq_printf(m, " Twin Channel Controller ");
else
{
char *channel = "";
char *ultra = "";
char *wide = "Narrow ";
if (p->flags & AHC_MULTI_CHANNEL)
{
channel = " Channel A";
if (p->flags & (AHC_CHNLB|AHC_CHNLC))
channel = (p->flags & AHC_CHNLB) ? " Channel B" : " Channel C";
}
if (p->features & AHC_WIDE)
wide = "Wide ";
if (p->features & AHC_ULTRA3)
{
switch(p->chip & AHC_CHIPID_MASK)
{
case AHC_AIC7892:
case AHC_AIC7899:
ultra = "Ultra-160/m LVD/SE ";
break;
default:
ultra = "Ultra-3 LVD/SE ";
break;
}
}
else if (p->features & AHC_ULTRA2)
ultra = "Ultra-2 LVD/SE ";
else if (p->features & AHC_ULTRA)
ultra = "Ultra ";
seq_printf(m, " %s%sController%s ",
ultra, wide, channel);
}
switch(p->chip & ~AHC_CHIPID_MASK)
{
case AHC_VL:
seq_printf(m, "at VLB slot %d\n", p->pci_device_fn);
break;
case AHC_EISA:
seq_printf(m, "at EISA slot %d\n", p->pci_device_fn);
break;
default:
seq_printf(m, "at PCI %d/%d/%d\n", p->pci_bus,
PCI_SLOT(p->pci_device_fn), PCI_FUNC(p->pci_device_fn));
break;
}
if( !(p->maddr) )
{
seq_printf(m, " Programmed I/O Base: %lx\n", p->base);
}
else
{
seq_printf(m, " PCI MMAPed I/O Base: 0x%lx\n", p->mbase);
}
if( (p->chip & (AHC_VL | AHC_EISA)) )
{
seq_printf(m, " BIOS Memory Address: 0x%08x\n", p->bios_address);
}
seq_printf(m, " Adapter SEEPROM Config: %s\n",
(p->flags & AHC_SEEPROM_FOUND) ? "SEEPROM found and used." :
((p->flags & AHC_USEDEFAULTS) ? "SEEPROM not found, using defaults." :
"SEEPROM not found, using leftover BIOS values.") );
seq_printf(m, " Adaptec SCSI BIOS: %s\n",
(p->flags & AHC_BIOS_ENABLED) ? "Enabled" : "Disabled");
seq_printf(m, " IRQ: %d\n", HBAptr->irq);
seq_printf(m, " SCBs: Active %d, Max Active %d,\n",
p->activescbs, p->max_activescbs);
seq_printf(m, " Allocated %d, HW %d, "
"Page %d\n", p->scb_data->numscbs, p->scb_data->maxhscbs,
p->scb_data->maxscbs);
if (p->flags & AHC_EXTERNAL_SRAM)
seq_printf(m, " Using External SCB SRAM\n");
seq_printf(m, " Interrupts: %ld", p->isr_count);
if (p->chip & AHC_EISA)
{
seq_printf(m, " %s\n",
(p->pause & IRQMS) ? "(Level Sensitive)" : "(Edge Triggered)");
}
else
{
seq_printf(m, "\n");
}
seq_printf(m, " BIOS Control Word: 0x%04x\n",
p->bios_control);
seq_printf(m, " Adapter Control Word: 0x%04x\n",
p->adapter_control);
seq_printf(m, " Extended Translation: %sabled\n",
(p->flags & AHC_EXTEND_TRANS_A) ? "En" : "Dis");
seq_printf(m, "Disconnect Enable Flags: 0x%04x\n", p->discenable);
if (p->features & (AHC_ULTRA | AHC_ULTRA2))
{
seq_printf(m, " Ultra Enable Flags: 0x%04x\n", p->ultraenb);
}
seq_printf(m, "Default Tag Queue Depth: %d\n", aic7xxx_default_queue_depth);
seq_printf(m, " Tagged Queue By Device array for aic7xxx host "
"instance %d:\n", p->instance);
seq_printf(m, " {");
for(i=0; i < (MAX_TARGETS - 1); i++)
seq_printf(m, "%d,",aic7xxx_tag_info[p->instance].tag_commands[i]);
seq_printf(m, "%d}\n",aic7xxx_tag_info[p->instance].tag_commands[i]);
seq_printf(m, "\n");
seq_printf(m, "Statistics:\n\n");
list_for_each_entry(aic_dev, &p->aic_devs, list)
{
sdptr = aic_dev->SDptr;
tindex = sdptr->channel << 3 | sdptr->id;
seq_printf(m, "(scsi%d:%d:%d:%d)\n",
p->host_no, sdptr->channel, sdptr->id, sdptr->lun);
seq_printf(m, " Device using %s/%s",
(aic_dev->cur.width == MSG_EXT_WDTR_BUS_16_BIT) ?
"Wide" : "Narrow",
(aic_dev->cur.offset != 0) ?
"Sync transfers at " : "Async transfers.\n" );
if (aic_dev->cur.offset != 0)
{
struct aic7xxx_syncrate *sync_rate;
unsigned char options = aic_dev->cur.options;
int period = aic_dev->cur.period;
int rate = (aic_dev->cur.width ==
MSG_EXT_WDTR_BUS_16_BIT) ? 1 : 0;
sync_rate = aic7xxx_find_syncrate(p, &period, 0, &options);
if (sync_rate != NULL)
{
seq_printf(m, "%s MByte/sec, offset %d\n",
sync_rate->rate[rate],
aic_dev->cur.offset );
}
else
{
seq_printf(m, "3.3 MByte/sec, offset %d\n",
aic_dev->cur.offset );
}
}
seq_printf(m, " Transinfo settings: ");
seq_printf(m, "current(%d/%d/%d/%d), ",
aic_dev->cur.period,
aic_dev->cur.offset,
aic_dev->cur.width,
aic_dev->cur.options);
seq_printf(m, "goal(%d/%d/%d/%d), ",
aic_dev->goal.period,
aic_dev->goal.offset,
aic_dev->goal.width,
aic_dev->goal.options);
seq_printf(m, "user(%d/%d/%d/%d)\n",
p->user[tindex].period,
p->user[tindex].offset,
p->user[tindex].width,
p->user[tindex].options);
if(sdptr->simple_tags)
{
seq_printf(m, " Tagged Command Queueing Enabled, Ordered Tags %s, Depth %d/%d\n", sdptr->ordered_tags ? "Enabled" : "Disabled", sdptr->queue_depth, aic_dev->max_q_depth);
}
if(aic_dev->barrier_total)
seq_printf(m, " Total transfers %ld:\n (%ld/%ld/%ld/%ld reads/writes/REQ_BARRIER/Ordered Tags)\n",
aic_dev->r_total+aic_dev->w_total, aic_dev->r_total, aic_dev->w_total,
aic_dev->barrier_total, aic_dev->ordered_total);
else
seq_printf(m, " Total transfers %ld:\n (%ld/%ld reads/writes)\n",
aic_dev->r_total+aic_dev->w_total, aic_dev->r_total, aic_dev->w_total);
seq_printf(m, "%s\n", HDRB);
seq_printf(m, " Reads:");
for (i = 0; i < ARRAY_SIZE(aic_dev->r_bins); i++)
{
seq_printf(m, " %10ld", aic_dev->r_bins[i]);
}
seq_printf(m, "\n");
seq_printf(m, " Writes:");
for (i = 0; i < ARRAY_SIZE(aic_dev->w_bins); i++)
{
seq_printf(m, " %10ld", aic_dev->w_bins[i]);
}
seq_printf(m, "\n");
seq_printf(m, "\n\n");
}
return 0;
}
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
* adjust the settings for this buffer only. This must remain at the end
* of the file.
* ---------------------------------------------------------------------------
* Local variables:
* c-indent-level: 2
* c-brace-imaginary-offset: 0
* c-brace-offset: -2
* c-argdecl-indent: 2
* c-label-offset: -2
* c-continued-statement-offset: 2
* c-continued-brace-offset: 0
* indent-tabs-mode: nil
* tab-width: 8
* End:
*/
This diff is collapsed.
This diff is collapsed.
/* Messages (1 byte) */ /* I/T (M)andatory or (O)ptional */
#define MSG_CMDCOMPLETE 0x00 /* M/M */
#define MSG_EXTENDED 0x01 /* O/O */
#define MSG_SAVEDATAPOINTER 0x02 /* O/O */
#define MSG_RESTOREPOINTERS 0x03 /* O/O */
#define MSG_DISCONNECT 0x04 /* O/O */
#define MSG_INITIATOR_DET_ERR 0x05 /* M/M */
#define MSG_ABORT 0x06 /* O/M */
#define MSG_MESSAGE_REJECT 0x07 /* M/M */
#define MSG_NOOP 0x08 /* M/M */
#define MSG_PARITY_ERROR 0x09 /* M/M */
#define MSG_LINK_CMD_COMPLETE 0x0a /* O/O */
#define MSG_LINK_CMD_COMPLETEF 0x0b /* O/O */
#define MSG_BUS_DEV_RESET 0x0c /* O/M */
#define MSG_ABORT_TAG 0x0d /* O/O */
#define MSG_CLEAR_QUEUE 0x0e /* O/O */
#define MSG_INIT_RECOVERY 0x0f /* O/O */
#define MSG_REL_RECOVERY 0x10 /* O/O */
#define MSG_TERM_IO_PROC 0x11 /* O/O */
/* Messages (2 byte) */
#define MSG_SIMPLE_Q_TAG 0x20 /* O/O */
#define MSG_HEAD_OF_Q_TAG 0x21 /* O/O */
#define MSG_ORDERED_Q_TAG 0x22 /* O/O */
#define MSG_IGN_WIDE_RESIDUE 0x23 /* O/O */
/* Identify message */ /* M/M */
#define MSG_IDENTIFYFLAG 0x80
#define MSG_IDENTIFY_DISCFLAG 0x40
#define MSG_IDENTIFY(lun, disc) (((disc) ? 0xc0 : MSG_IDENTIFYFLAG) | (lun))
#define MSG_ISIDENTIFY(m) ((m) & MSG_IDENTIFYFLAG)
/* Extended messages (opcode and length) */
#define MSG_EXT_SDTR 0x01
#define MSG_EXT_SDTR_LEN 0x03
#define MSG_EXT_WDTR 0x03
#define MSG_EXT_WDTR_LEN 0x02
#define MSG_EXT_WDTR_BUS_8_BIT 0x00
#define MSG_EXT_WDTR_BUS_16_BIT 0x01
#define MSG_EXT_WDTR_BUS_32_BIT 0x02
#define MSG_EXT_PPR 0x04
#define MSG_EXT_PPR_LEN 0x06
#define MSG_EXT_PPR_OPTION_ST 0x00
#define MSG_EXT_PPR_OPTION_DT_CRC 0x02
#define MSG_EXT_PPR_OPTION_DT_UNITS 0x03
#define MSG_EXT_PPR_OPTION_DT_CRC_QUICK 0x04
#define MSG_EXT_PPR_OPTION_DT_UNITS_QUICK 0x05
/*
* Instruction formats for the sequencer program downloaded to
* Aic7xxx SCSI host adapters
*
* Copyright (c) 1997, 1998 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Where this Software is combined with software released under the terms of
* the GNU General Public License ("GPL") and the terms of the GPL would require the
* combined work to also be released under the terms of the GPL, the terms
* and conditions of this License will apply in addition to those of the
* GPL with the exception of any terms or conditions of this License that
* conflict with, or are expressly prohibited by, the GPL.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: sequencer.h,v 1.3 1997/09/27 19:37:31 gibbs Exp $
*/
#ifdef __LITTLE_ENDIAN_BITFIELD
struct ins_format1 {
unsigned int
immediate : 8,
source : 9,
destination : 9,
ret : 1,
opcode : 4,
parity : 1;
};
struct ins_format2 {
unsigned int
shift_control : 8,
source : 9,
destination : 9,
ret : 1,
opcode : 4,
parity : 1;
};
struct ins_format3 {
unsigned int
immediate : 8,
source : 9,
address : 10,
opcode : 4,
parity : 1;
};
#elif defined(__BIG_ENDIAN_BITFIELD)
struct ins_format1 {
unsigned int
parity : 1,
opcode : 4,
ret : 1,
destination : 9,
source : 9,
immediate : 8;
};
struct ins_format2 {
unsigned int
parity : 1,
opcode : 4,
ret : 1,
destination : 9,
source : 9,
shift_control : 8;
};
struct ins_format3 {
unsigned int
parity : 1,
opcode : 4,
address : 10,
source : 9,
immediate : 8;
};
#endif
union ins_formats {
struct ins_format1 format1;
struct ins_format2 format2;
struct ins_format3 format3;
unsigned char bytes[4];
unsigned int integer;
};
struct instruction {
union ins_formats format;
unsigned int srcline;
struct symbol *patch_label;
struct {
struct instruction *stqe_next;
} links;
};
#define AIC_OP_OR 0x0
#define AIC_OP_AND 0x1
#define AIC_OP_XOR 0x2
#define AIC_OP_ADD 0x3
#define AIC_OP_ADC 0x4
#define AIC_OP_ROL 0x5
#define AIC_OP_BMOV 0x6
#define AIC_OP_JMP 0x8
#define AIC_OP_JC 0x9
#define AIC_OP_JNC 0xa
#define AIC_OP_CALL 0xb
#define AIC_OP_JNE 0xc
#define AIC_OP_JNZ 0xd
#define AIC_OP_JE 0xe
#define AIC_OP_JZ 0xf
/* Pseudo Ops */
#define AIC_OP_SHL 0x10
#define AIC_OP_SHR 0x20
#define AIC_OP_ROR 0x30
......@@ -541,10 +541,8 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba,
ip_type = BE2_IPV6;
len = mgmt_get_if_info(phba, ip_type, &if_info);
if (len) {
kfree(if_info);
if (len)
return len;
}
switch (param) {
case ISCSI_NET_PARAM_IPV4_ADDR:
......@@ -569,7 +567,7 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba,
break;
case ISCSI_NET_PARAM_VLAN_ID:
if (if_info->vlan_priority == BEISCSI_VLAN_DISABLE)
return -EINVAL;
len = -EINVAL;
else
len = sprintf(buf, "%d\n",
(if_info->vlan_priority &
......@@ -577,7 +575,7 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba,
break;
case ISCSI_NET_PARAM_VLAN_PRIORITY:
if (if_info->vlan_priority == BEISCSI_VLAN_DISABLE)
return -EINVAL;
len = -EINVAL;
else
len = sprintf(buf, "%d\n",
((if_info->vlan_priority >> 13) &
......
......@@ -1367,10 +1367,6 @@ bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr,
struct bfa_iocfc_s *iocfc = &bfa->iocfc;
bfa_status_t status;
iocfc->faa_args.faa_attr = attr;
iocfc->faa_args.faa_cb.faa_cbfn = cbfn;
iocfc->faa_args.faa_cb.faa_cbarg = cbarg;
status = bfa_faa_validate_request(bfa);
if (status != BFA_STATUS_OK)
return status;
......@@ -1378,6 +1374,10 @@ bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr,
if (iocfc->faa_args.busy == BFA_TRUE)
return BFA_STATUS_DEVBUSY;
iocfc->faa_args.faa_attr = attr;
iocfc->faa_args.faa_cb.faa_cbfn = cbfn;
iocfc->faa_args.faa_cb.faa_cbarg = cbarg;
iocfc->faa_args.busy = BFA_TRUE;
memset(&faa_attr_req, 0, sizeof(struct bfi_faa_query_s));
bfi_h2i_set(faa_attr_req.mh, BFI_MC_IOCFC,
......
......@@ -132,6 +132,7 @@ enum bfa_status {
BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if persists,
* contact support */
BFA_STATUS_EPROTOCOL = 6, /* Protocol error */
BFA_STATUS_BADFLASH = 9, /* Flash is bad */
BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */
BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */
BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted */
......
......@@ -1026,7 +1026,7 @@ struct fc_alpabm_s {
#define FC_ED_TOV 2
#define FC_REC_TOV (FC_ED_TOV + 1)
#define FC_RA_TOV 10
#define FC_ELS_TOV ((2 * FC_RA_TOV) + 1)
#define FC_ELS_TOV (2 * FC_RA_TOV)
#define FC_FCCT_TOV (3 * FC_RA_TOV)
/*
......
......@@ -773,7 +773,20 @@ bfa_fcs_lport_uf_recv(struct bfa_fcs_lport_s *lport,
bfa_trc(lport->fcs, fchs->type);
if (!bfa_fcs_lport_is_online(lport)) {
bfa_stats(lport, uf_recv_drops);
/*
* In direct attach topology, it is possible to get a PLOGI
* before the lport is online due to port feature
* (QoS/Trunk/FEC/CR), so send a rjt
*/
if ((fchs->type == FC_TYPE_ELS) &&
(els_cmd->els_code == FC_ELS_PLOGI)) {
bfa_fcs_lport_send_ls_rjt(lport, fchs,
FC_LS_RJT_RSN_UNABLE_TO_PERF_CMD,
FC_LS_RJT_EXP_NO_ADDL_INFO);
bfa_stats(lport, plogi_rcvd);
} else
bfa_stats(lport, uf_recv_drops);
return;
}
......
This diff is collapsed.
......@@ -515,6 +515,8 @@ void bfa_flash_attach(struct bfa_flash_s *flash, struct bfa_ioc_s *ioc,
void *dev, struct bfa_trc_mod_s *trcmod, bfa_boolean_t mincfg);
void bfa_flash_memclaim(struct bfa_flash_s *flash,
u8 *dm_kva, u64 dm_pa, bfa_boolean_t mincfg);
bfa_status_t bfa_flash_raw_read(void __iomem *pci_bar_kva,
u32 offset, char *buf, u32 len);
/*
* DIAG module specific
......@@ -888,7 +890,7 @@ void bfa_ioc_enable(struct bfa_ioc_s *ioc);
void bfa_ioc_disable(struct bfa_ioc_s *ioc);
bfa_boolean_t bfa_ioc_intx_claim(struct bfa_ioc_s *ioc);
void bfa_ioc_boot(struct bfa_ioc_s *ioc, u32 boot_type,
bfa_status_t bfa_ioc_boot(struct bfa_ioc_s *ioc, u32 boot_type,
u32 boot_env);
void bfa_ioc_isr(struct bfa_ioc_s *ioc, struct bfi_mbmsg_s *msg);
void bfa_ioc_error_isr(struct bfa_ioc_s *ioc);
......@@ -919,6 +921,7 @@ bfa_status_t bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata,
int *trclen);
bfa_status_t bfa_ioc_debug_fwcore(struct bfa_ioc_s *ioc, void *buf,
u32 *offset, int *buflen);
bfa_status_t bfa_ioc_fwsig_invalidate(struct bfa_ioc_s *ioc);
bfa_boolean_t bfa_ioc_sem_get(void __iomem *sem_reg);
void bfa_ioc_fwver_get(struct bfa_ioc_s *ioc,
struct bfi_ioc_image_hdr_s *fwhdr);
......@@ -956,6 +959,8 @@ bfa_status_t bfa_ablk_optrom_en(struct bfa_ablk_s *ablk,
bfa_status_t bfa_ablk_optrom_dis(struct bfa_ablk_s *ablk,
bfa_ablk_cbfn_t cbfn, void *cbarg);
bfa_status_t bfa_ioc_flash_img_get_chnk(struct bfa_ioc_s *ioc, u32 off,
u32 *fwimg);
/*
* bfa mfg wwn API functions
*/
......
......@@ -81,6 +81,29 @@ bfa_ioc_set_cb_hwif(struct bfa_ioc_s *ioc)
static bfa_boolean_t
bfa_ioc_cb_firmware_lock(struct bfa_ioc_s *ioc)
{
enum bfi_ioc_state alt_fwstate, cur_fwstate;
struct bfi_ioc_image_hdr_s fwhdr;
cur_fwstate = bfa_ioc_cb_get_cur_ioc_fwstate(ioc);
bfa_trc(ioc, cur_fwstate);
alt_fwstate = bfa_ioc_cb_get_alt_ioc_fwstate(ioc);
bfa_trc(ioc, alt_fwstate);
/*
* Uninit implies this is the only driver as of now.
*/
if (cur_fwstate == BFI_IOC_UNINIT)
return BFA_TRUE;
/*
* Check if another driver with a different firmware is active
*/
bfa_ioc_fwver_get(ioc, &fwhdr);
if (!bfa_ioc_fwver_cmp(ioc, &fwhdr) &&
alt_fwstate != BFI_IOC_DISABLED) {
bfa_trc(ioc, alt_fwstate);
return BFA_FALSE;
}
return BFA_TRUE;
}
......
......@@ -6758,7 +6758,7 @@ bfa_dport_scn(struct bfa_dport_s *dport, struct bfi_diag_dport_scn_s *msg)
dport->rp_pwwn = msg->info.teststart.pwwn;
dport->rp_nwwn = msg->info.teststart.nwwn;
dport->lpcnt = cpu_to_be32(msg->info.teststart.numfrm);
bfa_dport_result_start(dport, BFA_DPORT_OPMODE_AUTO);
bfa_dport_result_start(dport, msg->info.teststart.mode);
break;
case BFI_DPORT_SCN_SUBTESTSTART:
......
This diff is collapsed.
......@@ -228,6 +228,18 @@ bfad_iocmd_iocfc_get_attr(struct bfad_s *bfad, void *cmd)
return 0;
}
int
bfad_iocmd_ioc_fw_sig_inv(struct bfad_s *bfad, void *cmd)
{
struct bfa_bsg_gen_s *iocmd = (struct bfa_bsg_gen_s *)cmd;
unsigned long flags;
spin_lock_irqsave(&bfad->bfad_lock, flags);
iocmd->status = bfa_ioc_fwsig_invalidate(&bfad->bfa.ioc);
spin_unlock_irqrestore(&bfad->bfad_lock, flags);
return 0;
}
int
bfad_iocmd_iocfc_set_intr(struct bfad_s *bfad, void *cmd)
{
......@@ -2893,6 +2905,9 @@ bfad_iocmd_handler(struct bfad_s *bfad, unsigned int cmd, void *iocmd,
case IOCMD_IOC_PCIFN_CFG:
rc = bfad_iocmd_ioc_get_pcifn_cfg(bfad, iocmd);
break;
case IOCMD_IOC_FW_SIG_INV:
rc = bfad_iocmd_ioc_fw_sig_inv(bfad, iocmd);
break;
case IOCMD_PCIFN_CREATE:
rc = bfad_iocmd_pcifn_create(bfad, iocmd);
break;
......
......@@ -34,6 +34,7 @@ enum {
IOCMD_IOC_RESET_FWSTATS,
IOCMD_IOC_SET_ADAPTER_NAME,
IOCMD_IOC_SET_PORT_NAME,
IOCMD_IOC_FW_SIG_INV,
IOCMD_IOCFC_GET_ATTR,
IOCMD_IOCFC_SET_INTR,
IOCMD_PORT_ENABLE,
......
......@@ -57,7 +57,7 @@
#ifdef BFA_DRIVER_VERSION
#define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION
#else
#define BFAD_DRIVER_VERSION "3.2.21.1"
#define BFAD_DRIVER_VERSION "3.2.23.0"
#endif
#define BFAD_PROTO_NAME FCPI_NAME
......@@ -240,8 +240,8 @@ enum bfad_sm_event {
BFAD_E_KTHREAD_CREATE_FAILED = 2,
BFAD_E_INIT = 3,
BFAD_E_INIT_SUCCESS = 4,
BFAD_E_INIT_FAILED = 5,
BFAD_E_INTR_INIT_FAILED = 6,
BFAD_E_HAL_INIT_FAILED = 5,
BFAD_E_INIT_FAILED = 6,
BFAD_E_FCS_EXIT_COMP = 7,
BFAD_E_EXIT_COMP = 8,
BFAD_E_STOP = 9
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -356,7 +356,9 @@ struct CfgTable {
u32 TransMethodOffset;
u8 ServerName[16];
u32 HeartBeat;
u32 SCSI_Prefetch;
u32 driver_support;
#define ENABLE_SCSI_PREFETCH 0x100
#define ENABLE_UNIT_ATTN 0x01
u32 MaxScatterGatherElements;
u32 MaxLogicalUnits;
u32 MaxPhysicalDevices;
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -1527,7 +1527,6 @@ struct megasas_instance {
u32 *reply_queue;
dma_addr_t reply_queue_h;
unsigned long base_addr;
struct megasas_register_set __iomem *reg_set;
u32 *reply_post_host_index_addr[MR_MAX_MSIX_REG_ARRAY];
struct megasas_pd_list pd_list[MEGASAS_MAX_PD];
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment