Commit 1954ee55 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus-1' of...

Merge branch 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig

* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
  kconfig: simplification of scripts/extract-ikconfig
parents a85821fc 7b76bfc8
...@@ -69,7 +69,6 @@ av_permissions.h ...@@ -69,7 +69,6 @@ av_permissions.h
bbootsect bbootsect
bin2c bin2c
binkernel.spec binkernel.spec
binoffset
bootsect bootsect
bounds.h bounds.h
bsetup bsetup
......
...@@ -6,5 +6,4 @@ kallsyms ...@@ -6,5 +6,4 @@ kallsyms
pnmtologo pnmtologo
bin2c bin2c
unifdef unifdef
binoffset
ihex2fw ihex2fw
/***************************************************************************
* binoffset.c
* (C) 2002 Randy Dunlap <rdunlap@xenotime.net>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
# binoffset.c:
# - searches a (binary) file for a specified (binary) pattern
# - returns the offset of the located pattern or ~0 if not found
# - exits with exit status 0 normally or non-0 if pattern is not found
# or any other error occurs.
****************************************************************/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/mman.h>
#define VERSION "0.1"
#define BUF_SIZE (16 * 1024)
#define PAT_SIZE 100
char *progname;
char *inputname;
int inputfd;
unsigned int bix; /* buf index */
unsigned char patterns [PAT_SIZE] = {0}; /* byte-sized pattern array */
int pat_len; /* actual number of pattern bytes */
unsigned char *madr; /* mmap address */
size_t filesize;
int num_matches = 0;
off_t firstloc = 0;
void usage (void)
{
fprintf (stderr, "%s ver. %s\n", progname, VERSION);
fprintf (stderr, "usage: %s filename pattern_bytes\n",
progname);
fprintf (stderr, " [prints location of pattern_bytes in file]\n");
exit (1);
}
void get_pattern (int pat_count, char *pats [])
{
int ix, err, tmp;
#ifdef DEBUG
fprintf (stderr,"get_pattern: count = %d\n", pat_count);
for (ix = 0; ix < pat_count; ix++)
fprintf (stderr, " pat # %d: [%s]\n", ix, pats[ix]);
#endif
for (ix = 0; ix < pat_count; ix++) {
tmp = 0;
err = sscanf (pats[ix], "%5i", &tmp);
if (err != 1 || tmp > 0xff) {
fprintf (stderr, "pattern or value error in pattern # %d [%s]\n",
ix, pats[ix]);
usage ();
}
patterns [ix] = tmp;
}
pat_len = pat_count;
}
void search_pattern (void)
{
for (bix = 0; bix < filesize; bix++) {
if (madr[bix] == patterns[0]) {
if (memcmp (&madr[bix], patterns, pat_len) == 0) {
if (num_matches == 0)
firstloc = bix;
num_matches++;
}
}
}
}
#ifdef NOTDEF
size_t get_filesize (int fd)
{
off_t end_off = lseek (fd, 0, SEEK_END);
lseek (fd, 0, SEEK_SET);
return (size_t) end_off;
}
#endif
size_t get_filesize (int fd)
{
int err;
struct stat stat;
err = fstat (fd, &stat);
fprintf (stderr, "filesize: %ld\n", err < 0 ? (long)err : stat.st_size);
if (err < 0)
return err;
return (size_t) stat.st_size;
}
int main (int argc, char *argv [])
{
progname = argv[0];
if (argc < 3)
usage ();
get_pattern (argc - 2, argv + 2);
inputname = argv[1];
inputfd = open (inputname, O_RDONLY);
if (inputfd == -1) {
fprintf (stderr, "%s: cannot open '%s'\n",
progname, inputname);
exit (3);
}
filesize = get_filesize (inputfd);
madr = mmap (0, filesize, PROT_READ, MAP_PRIVATE, inputfd, 0);
if (madr == MAP_FAILED) {
fprintf (stderr, "mmap error = %d\n", errno);
close (inputfd);
exit (4);
}
search_pattern ();
if (munmap (madr, filesize))
fprintf (stderr, "munmap error = %d\n", errno);
if (close (inputfd))
fprintf (stderr, "%s: error %d closing '%s'\n",
progname, errno, inputname);
fprintf (stderr, "number of pattern matches = %d\n", num_matches);
if (num_matches == 0)
firstloc = ~0;
printf ("%ld\n", firstloc);
fprintf (stderr, "%ld\n", firstloc);
exit (num_matches ? 0 : 2);
}
/* end binoffset.c */
#!/bin/sh #!/bin/sh
# extracts .config info from a [b]zImage file # ----------------------------------------------------------------------
# uses: binoffset (new), dd, zcat, strings, grep # extract-ikconfig - Extract the .config file from a kernel image
# $arg1 is [b]zImage filename #
# This will only work when the kernel was compiled with CONFIG_IKCONFIG.
binoffset="./scripts/binoffset" #
test -e $binoffset || cc -o $binoffset ./scripts/binoffset.c || exit 1 # The obscure use of the "tr" filter is to work around older versions of
# "grep" that report the byte offset of the line instead of the pattern.
IKCFG_ST="0x49 0x4b 0x43 0x46 0x47 0x5f 0x53 0x54" #
IKCFG_ED="0x49 0x4b 0x43 0x46 0x47 0x5f 0x45 0x44" # (c) 2009, Dick Streefland <dick@streefland.net>
dump_config() { # Licensed under the terms of the GNU General Public License.
file="$1" # ----------------------------------------------------------------------
start=`$binoffset $file $IKCFG_ST 2>/dev/null` gz1='\037\213\010'
[ "$?" != "0" ] && start="-1" gz2='01'
if [ "$start" -eq "-1" ]; then cf1='IKCFG_ST\037\213\010'
return cf2='0123456789'
fi
end=`$binoffset $file $IKCFG_ED 2>/dev/null` dump_config()
[ "$?" != "0" ] && end="-1"
if [ "$end" -eq "-1" ]; then
return
fi
start=`expr $start + 8`
size=`expr $end - $start`
dd if="$file" ibs=1 skip="$start" count="$size" 2>/dev/null | zcat
clean_up
exit 0
}
usage()
{
echo " usage: extract-ikconfig [b]zImage_filename"
}
clean_up()
{ {
if [ "$TMPFILE" != "" ]; then if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"`
rm -f $TMPFILE then
pos=${pos%%:*}
tail -c+$(($pos+8)) "$1" | zcat -q
exit 0
fi fi
} }
if [ $# -lt 1 ] # Check invocation:
me=${0##*/}
img=$1
if [ $# -ne 1 -o ! -s "$img" ]
then then
usage echo "Usage: $me <kernel-image>" >&2
exit 1 exit 2
fi fi
TMPFILE=`mktemp -t ikconfig-XXXXXX` || exit 1 # Initial attempt for uncompressed images or objects:
image="$1" dump_config "$img"
# vmlinux: Attempt to dump the configuration from the file directly # That didn't work, so decompress and try again:
dump_config "$image" tmp=/tmp/ikconfig$$
trap "rm -f $tmp" 0
GZHDR1="0x1f 0x8b 0x08 0x00" for pos in `tr "$gz1\n$gz2" "\n$gz2=" < "$img" | grep -abo "^$gz2"`
GZHDR2="0x1f 0x8b 0x08 0x08" do
pos=${pos%%:*}
ELFHDR="0x7f 0x45 0x4c 0x46" tail -c+$pos "$img" | zcat 2> /dev/null > $tmp
dump_config $tmp
# vmlinux.gz: Check for a compressed images done
off=`$binoffset "$image" $GZHDR1 2>/dev/null`
[ "$?" != "0" ] && off="-1" # Bail out:
if [ "$off" -eq "-1" ]; then echo "$me: Cannot find kernel config." >&2
off=`$binoffset "$image" $GZHDR2 2>/dev/null`
[ "$?" != "0" ] && off="-1"
fi
if [ "$off" -eq "0" ]; then
zcat <"$image" >"$TMPFILE"
dump_config "$TMPFILE"
elif [ "$off" -ne "-1" ]; then
(dd ibs="$off" skip=1 count=0 && dd bs=512k) <"$image" 2>/dev/null | \
zcat >"$TMPFILE"
dump_config "$TMPFILE"
# check if this is simply an ELF file
else
off=`$binoffset "$image" $ELFHDR 2>/dev/null`
[ "$?" != "0" ] && off="-1"
if [ "$off" -eq "0" ]; then
dump_config "$image"
fi
fi
echo "ERROR: Unable to extract kernel configuration information."
echo " This kernel image may not have the config info."
clean_up
exit 1 exit 1
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment