Commit 19971f5e authored by Yangbo Lu's avatar Yangbo Lu Committed by David S. Miller

enetc: add PTP clock driver

This patch is to add PTP clock driver for ENETC.
The driver reused QorIQ PTP clock driver.
Signed-off-by: default avatarYangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ad6e1be6
...@@ -17,3 +17,15 @@ config FSL_ENETC_VF ...@@ -17,3 +17,15 @@ config FSL_ENETC_VF
virtual function (VF) devices enabled by the ENETC PF driver. virtual function (VF) devices enabled by the ENETC PF driver.
If compiled as module (M), the module name is fsl-enetc-vf. If compiled as module (M), the module name is fsl-enetc-vf.
config FSL_ENETC_PTP_CLOCK
tristate "ENETC PTP clock driver"
depends on PTP_1588_CLOCK_QORIQ && (FSL_ENETC || FSL_ENETC_VF)
default y
help
This driver adds support for using the ENETC 1588 timer
as a PTP clock. This clock is only useful if your PTP
programs are getting hardware time stamps on the PTP Ethernet
packets using the SO_TIMESTAMPING API.
If compiled as module (M), the module name is fsl-enetc-ptp.
...@@ -13,3 +13,6 @@ fsl-enetc-vf-$(CONFIG_FSL_ENETC_VF) += enetc.o enetc_cbdr.o \ ...@@ -13,3 +13,6 @@ fsl-enetc-vf-$(CONFIG_FSL_ENETC_VF) += enetc.o enetc_cbdr.o \
enetc_ethtool.o enetc_ethtool.o
fsl-enetc-vf-objs := enetc_vf.o $(fsl-enetc-vf-y) fsl-enetc-vf-objs := enetc_vf.o $(fsl-enetc-vf-y)
endif endif
obj-$(CONFIG_FSL_ENETC_PTP_CLOCK) += fsl-enetc-ptp.o
fsl-enetc-ptp-$(CONFIG_FSL_ENETC_PTP_CLOCK) += enetc_ptp.o
...@@ -4,8 +4,9 @@ ...@@ -4,8 +4,9 @@
#include <linux/bitops.h> #include <linux/bitops.h>
/* ENETC device IDs */ /* ENETC device IDs */
#define ENETC_DEV_ID_PF 0xe100 #define ENETC_DEV_ID_PF 0xe100
#define ENETC_DEV_ID_VF 0xef00 #define ENETC_DEV_ID_VF 0xef00
#define ENETC_DEV_ID_PTP 0xee02
/* ENETC register block BAR */ /* ENETC register block BAR */
#define ENETC_BAR_REGS 0 #define ENETC_BAR_REGS 0
......
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* Copyright 2019 NXP */
#include <linux/module.h>
#include <linux/of.h>
#include <linux/fsl/ptp_qoriq.h>
#include "enetc.h"
static struct ptp_clock_info enetc_ptp_caps = {
.owner = THIS_MODULE,
.name = "ENETC PTP clock",
.max_adj = 512000,
.n_alarm = 0,
.n_ext_ts = 2,
.n_per_out = 0,
.n_pins = 0,
.pps = 1,
.adjfine = ptp_qoriq_adjfine,
.adjtime = ptp_qoriq_adjtime,
.gettime64 = ptp_qoriq_gettime,
.settime64 = ptp_qoriq_settime,
.enable = ptp_qoriq_enable,
};
static int enetc_ptp_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct ptp_qoriq *ptp_qoriq;
void __iomem *base;
int err, len, n;
if (pdev->dev.of_node && !of_device_is_available(pdev->dev.of_node)) {
dev_info(&pdev->dev, "device is disabled, skipping\n");
return -ENODEV;
}
err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev, "device enable failed\n");
return err;
}
/* set up for high or low dma */
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (err) {
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev,
"DMA configuration failed: 0x%x\n", err);
goto err_dma;
}
}
err = pci_request_mem_regions(pdev, KBUILD_MODNAME);
if (err) {
dev_err(&pdev->dev, "pci_request_regions failed err=%d\n", err);
goto err_pci_mem_reg;
}
pci_set_master(pdev);
ptp_qoriq = kzalloc(sizeof(*ptp_qoriq), GFP_KERNEL);
if (!ptp_qoriq) {
err = -ENOMEM;
goto err_alloc_ptp;
}
len = pci_resource_len(pdev, ENETC_BAR_REGS);
base = ioremap(pci_resource_start(pdev, ENETC_BAR_REGS), len);
if (!base) {
err = -ENXIO;
dev_err(&pdev->dev, "ioremap() failed\n");
goto err_ioremap;
}
/* Allocate 1 interrupt */
n = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX);
if (n != 1) {
err = -EPERM;
goto err_irq;
}
ptp_qoriq->irq = pci_irq_vector(pdev, 0);
err = request_irq(ptp_qoriq->irq, ptp_qoriq_isr, 0, DRIVER, ptp_qoriq);
if (err) {
dev_err(&pdev->dev, "request_irq() failed!\n");
goto err_irq;
}
ptp_qoriq->dev = &pdev->dev;
err = ptp_qoriq_init(ptp_qoriq, base, enetc_ptp_caps);
if (err)
goto err_no_clock;
pci_set_drvdata(pdev, ptp_qoriq);
return 0;
err_no_clock:
free_irq(ptp_qoriq->irq, ptp_qoriq);
err_irq:
iounmap(base);
err_ioremap:
kfree(ptp_qoriq);
err_alloc_ptp:
pci_release_mem_regions(pdev);
err_pci_mem_reg:
err_dma:
pci_disable_device(pdev);
return err;
}
static void enetc_ptp_remove(struct pci_dev *pdev)
{
struct ptp_qoriq *ptp_qoriq = pci_get_drvdata(pdev);
ptp_qoriq_free(ptp_qoriq);
kfree(ptp_qoriq);
pci_release_mem_regions(pdev);
pci_disable_device(pdev);
}
static const struct pci_device_id enetc_ptp_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, ENETC_DEV_ID_PTP) },
{ 0, } /* End of table. */
};
MODULE_DEVICE_TABLE(pci, enetc_ptp_id_table);
static struct pci_driver enetc_ptp_driver = {
.name = KBUILD_MODNAME,
.id_table = enetc_ptp_id_table,
.probe = enetc_ptp_probe,
.remove = enetc_ptp_remove,
};
module_pci_driver(enetc_ptp_driver);
MODULE_DESCRIPTION("ENETC PTP clock driver");
MODULE_LICENSE("Dual BSD/GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment