Commit 19d52e94 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'omap-for-v5.6/dt-late-signed' of...

Merge tag 'omap-for-v5.6/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late

Late omap dts changes for v5.6 merge window

This series of changes mostly configures the cameras for dra7 and
am437x that have been pending for few months now because of waiting
for clock dependencies to clear. So these changes are based on earlier
dts changes with with Tero Kristo's for-5.6-ti-clk branch merged in.

Then there's a series of changes to configure powervr sgx target module
for am335x, am437x and dra7 that have been waiting to have the rstctrl
reset driver dependencies to clear.

Also included are few minor patches to configure 1-wire and coulomb
counter calibration interrupt for droid4.

* tag 'omap-for-v5.6/dt-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
  ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem
  ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt
  ARM: dts: Configure interconnect target module for am437x sgx
  ARM: dts: Configure sgx for dra7
  ARM: dts: Configure rstctrl reset for am335x SGX
  ARM: dts: dra7: Add ti-sysc node for VPE
  ARM: dts: dra7: add vpe clkctrl node
  ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
  ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
  ARM: dts: am43xx: add support for clkout1 clock
  arm: dts: dra76-evm: Add CAL and OV5640 nodes
  arm: dtsi: dra76x: Add CAL dtsi node
  arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
  ARM: dts: DRA72: Add CAL dtsi node
  ARM: dts: dra7-l4: Add ti-sysc node for CAM
  ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  ARM: dts: dra7: add cam clkctrl node
  ARM: dts: Add omap3-echo
  ARM: dts: Add dtsi files for AM3703, AM3715 and DM3725
  ARM: dts: am335x-icev2: Add support for OSD9616P0899-10 at i2c0
  ...

Link: https://lore.kernel.org/r/pull-1579896427-50330@atomide.com-3Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 955d8f3e 2256e6f6
...@@ -691,6 +691,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ ...@@ -691,6 +691,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
omap3-devkit8000.dtb \ omap3-devkit8000.dtb \
omap3-devkit8000-lcd43.dtb \ omap3-devkit8000-lcd43.dtb \
omap3-devkit8000-lcd70.dtb \ omap3-devkit8000-lcd70.dtb \
omap3-echo.dtb \
omap3-evm.dtb \ omap3-evm.dtb \
omap3-evm-37xx.dtb \ omap3-evm-37xx.dtb \
omap3-gta04a3.dtb \ omap3-gta04a3.dtb \
......
...@@ -113,7 +113,7 @@ switch10 { ...@@ -113,7 +113,7 @@ switch10 {
}; };
}; };
backlight { backlight: backlight {
compatible = "pwm-backlight"; compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 0>; pwms = <&ecap0 0 50000 0>;
brightness-levels = <0 51 53 56 62 75 101 152 255>; brightness-levels = <0 51 53 56 62 75 101 152 255>;
...@@ -121,35 +121,15 @@ backlight { ...@@ -121,35 +121,15 @@ backlight {
}; };
panel { panel {
compatible = "ti,tilcdc,panel"; compatible = "tfc,s9700rtwv43tr-01b";
status = "okay";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&lcd_pins_s0>; pinctrl-0 = <&lcd_pins_s0>;
panel-info { backlight = <&backlight>;
ac-bias = <255>;
ac-bias-intrpt = <0>;
dma-burst-sz = <16>;
bpp = <32>;
fdd = <0x80>;
sync-edge = <0>;
sync-ctrl = <1>;
raster-order = <0>;
fifo-th = <0>;
};
display-timings { port {
800x480p62 { panel_0: endpoint@0 {
clock-frequency = <30000000>; remote-endpoint = <&lcdc_0>;
hactive = <800>;
vactive = <480>;
hfront-porch = <39>;
hback-porch = <39>;
hsync-len = <47>;
vback-porch = <29>;
vfront-porch = <13>;
vsync-len = <2>;
hsync-active = <1>;
vsync-active = <1>;
}; };
}; };
}; };
...@@ -500,6 +480,12 @@ &lcdc { ...@@ -500,6 +480,12 @@ &lcdc {
status = "okay"; status = "okay";
blue-and-red-wiring = "crossed"; blue-and-red-wiring = "crossed";
port {
lcdc_0: endpoint@0 {
remote-endpoint = <&panel_0>;
};
};
}; };
&elm { &elm {
......
...@@ -183,36 +183,16 @@ sound_master: simple-audio-card,codec { ...@@ -183,36 +183,16 @@ sound_master: simple-audio-card,codec {
}; };
panel { panel {
compatible = "ti,tilcdc,panel"; compatible = "newhaven,nhd-4.3-480272ef-atxl";
pinctrl-names = "default", "sleep"; pinctrl-names = "default", "sleep";
pinctrl-0 = <&lcd_pins_default>; pinctrl-0 = <&lcd_pins_default>;
pinctrl-1 = <&lcd_pins_sleep>; pinctrl-1 = <&lcd_pins_sleep>;
backlight = <&lcd_bl>; backlight = <&lcd_bl>;
status = "okay";
panel-info { port {
ac-bias = <255>; panel_0: endpoint@0 {
ac-bias-intrpt = <0>; remote-endpoint = <&lcdc_0>;
dma-burst-sz = <16>;
bpp = <32>;
fdd = <0x80>;
sync-edge = <0>;
sync-ctrl = <1>;
raster-order = <0>;
fifo-th = <0>;
};
display-timings {
480x272 {
hactive = <480>;
vactive = <272>;
hback-porch = <43>;
hfront-porch = <8>;
hsync-len = <4>;
vback-porch = <12>;
vfront-porch = <4>;
vsync-len = <10>;
clock-frequency = <9000000>;
hsync-active = <0>;
vsync-active = <0>;
}; };
}; };
}; };
...@@ -725,6 +705,12 @@ &lcdc { ...@@ -725,6 +705,12 @@ &lcdc {
status = "okay"; status = "okay";
blue-and-red-wiring = "crossed"; blue-and-red-wiring = "crossed";
port {
lcdc_0: endpoint@0 {
remote-endpoint = <&panel_0>;
};
};
}; };
&rtc { &rtc {
......
...@@ -287,6 +287,19 @@ pca9536: gpio@41 { ...@@ -287,6 +287,19 @@ pca9536: gpio@41 {
gpio-controller; gpio-controller;
#gpio-cells = <2>; #gpio-cells = <2>;
}; };
/* osd9616p0899-10 */
display@3c {
compatible = "solomon,ssd1306fb-i2c";
reg = <0x3c>;
solomon,height = <16>;
solomon,width = <96>;
solomon,com-seq;
solomon,com-invdir;
solomon,page-offset = <0>;
solomon,prechargep1 = <2>;
solomon,prechargep2 = <13>;
};
}; };
&spi0 { &spi0 {
......
...@@ -496,6 +496,31 @@ aes: aes@0 { ...@@ -496,6 +496,31 @@ aes: aes@0 {
dma-names = "tx", "rx"; dma-names = "tx", "rx";
}; };
}; };
target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,
<0x5600fe10 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
clock-names = "fck";
resets = <&prm_gfx 0>;
reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x56000000 0x1000000>;
/*
* Closed source PowerVR driver, no child device
* binding or driver in mainline
*/
};
}; };
}; };
......
...@@ -74,7 +74,7 @@ davinci_emac: ethernet@5c000000 { ...@@ -74,7 +74,7 @@ davinci_emac: ethernet@5c000000 {
clock-names = "ick"; clock-names = "ick";
}; };
davinci_mdio: ethernet@5c030000 { davinci_mdio: mdio@5c030000 {
compatible = "ti,davinci_mdio"; compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio"; ti,hwmods = "davinci_mdio";
status = "disabled"; status = "disabled";
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
*/
#include "omap36xx.dtsi"
&iva {
status = "disabled";
};
&sgx_module {
status = "disabled";
};
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
*/
#include "omap36xx.dtsi"
&iva {
status = "disabled";
};
...@@ -445,6 +445,26 @@ pm_sram_data: pm-data-sram@1000 { ...@@ -445,6 +445,26 @@ pm_sram_data: pm-data-sram@1000 {
pool; pool;
}; };
}; };
target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,
<0x5600fe10 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
clock-names = "fck";
resets = <&prm_gfx 0>;
reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x56000000 0x1000000>;
};
}; };
}; };
......
...@@ -272,6 +272,12 @@ AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) ...@@ -272,6 +272,12 @@ AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>; >;
}; };
clkout1_pin: pinmux_clkout1_pin {
pinctrl-single,pins = <
0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* XDMA_EVENT_INTR0/CLKOUT1 */
>;
};
cpsw_default: cpsw_default { cpsw_default: cpsw_default {
pinctrl-single,pins = < pinctrl-single,pins = <
/* Slave 1 */ /* Slave 1 */
...@@ -593,6 +599,25 @@ &i2c1 { ...@@ -593,6 +599,25 @@ &i2c1 {
pinctrl-0 = <&i2c1_pins>; pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>; clock-frequency = <400000>;
ov2659@30 {
compatible = "ovti,ov2659";
reg = <0x30>;
pinctrl-names = "default";
pinctrl-0 = <&clkout1_pin>;
clocks = <&clkout1_mux_ck>;
clock-names = "xvclk";
assigned-clocks = <&clkout1_mux_ck>;
assigned-clock-parents = <&clkout1_osc_div_ck>;
port {
ov2659_1: endpoint {
remote-endpoint = <&vpfe0_ep>;
link-frequencies = /bits/ 64 <70000000>;
};
};
};
edt-ft5306@38 { edt-ft5306@38 {
status = "okay"; status = "okay";
compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
...@@ -877,7 +902,7 @@ &vpfe0 { ...@@ -877,7 +902,7 @@ &vpfe0 {
/* Camera port */ /* Camera port */
port { port {
vpfe0_ep: endpoint { vpfe0_ep: endpoint {
/* remote-endpoint = <&sensor>; add once we have it */ remote-endpoint = <&ov2659_1>;
ti,am437x-vpfe-interface = <0>; ti,am437x-vpfe-interface = <0>;
bus-width = <8>; bus-width = <8>;
hsync-active = <0>; hsync-active = <0>;
......
...@@ -145,6 +145,12 @@ sound0_master: simple-audio-card,codec { ...@@ -145,6 +145,12 @@ sound0_master: simple-audio-card,codec {
system-clock-frequency = <12000000>; system-clock-frequency = <12000000>;
}; };
}; };
audio_mstrclk: clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <12000000>;
};
}; };
&am43xx_pinmux { &am43xx_pinmux {
...@@ -696,6 +702,21 @@ tlv320aic3111: tlv320aic3111@18 { ...@@ -696,6 +702,21 @@ tlv320aic3111: tlv320aic3111@18 {
IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */ IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */ DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
}; };
ov2659@30 {
compatible = "ovti,ov2659";
reg = <0x30>;
clocks = <&audio_mstrclk>;
clock-names = "xvclk";
port {
ov2659_1: endpoint {
remote-endpoint = <&vpfe1_ep>;
link-frequencies = /bits/ 64 <70000000>;
};
};
};
}; };
&i2c2 { &i2c2 {
...@@ -962,7 +983,7 @@ &vpfe1 { ...@@ -962,7 +983,7 @@ &vpfe1 {
port { port {
vpfe1_ep: endpoint { vpfe1_ep: endpoint {
/* remote-endpoint = <&sensor>; add once we have it */ remote-endpoint = <&ov2659_1>;
ti,am437x-vpfe-interface = <0>; ti,am437x-vpfe-interface = <0>;
bus-width = <8>; bus-width = <8>;
hsync-active = <0>; hsync-active = <0>;
......
...@@ -704,6 +704,60 @@ usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 { ...@@ -704,6 +704,60 @@ usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
ti,bit-shift = <8>; ti,bit-shift = <8>;
reg = <0x2a48>; reg = <0x2a48>;
}; };
clkout1_osc_div_ck: clkout1-osc-div-ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sys_clkin_ck>;
ti,bit-shift = <20>;
ti,max-div = <4>;
reg = <0x4100>;
};
clkout1_src2_mux_ck: clkout1-src2-mux-ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
<&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
<&dpll_mpu_m2_ck>;
reg = <0x4100>;
};
clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&clkout1_src2_mux_ck>;
ti,bit-shift = <4>;
ti,max-div = <8>;
reg = <0x4100>;
};
clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&clkout1_src2_pre_div_ck>;
ti,bit-shift = <8>;
ti,max-div = <32>;
ti,index-power-of-two;
reg = <0x4100>;
};
clkout1_mux_ck: clkout1-mux-ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
<&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
ti,bit-shift = <16>;
reg = <0x4100>;
};
clkout1_ck: clkout1-ck {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkout1_mux_ck>;
ti,bit-shift = <23>;
reg = <0x4100>;
};
}; };
&prcm { &prcm {
......
...@@ -9,6 +9,7 @@ / { ...@@ -9,6 +9,7 @@ / {
aliases { aliases {
rtc0 = &tps659038_rtc; rtc0 = &tps659038_rtc;
rtc1 = &rtc; rtc1 = &rtc;
display0 = &hdmi0;
}; };
chosen { chosen {
...@@ -96,6 +97,48 @@ led-out7 { ...@@ -96,6 +97,48 @@ led-out7 {
default-state = "off"; default-state = "off";
}; };
}; };
hdmi0: connector@0 {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&tpd12s015_out>;
};
};
};
tpd12s015: encoder@0 {
compatible = "ti,tpd12s016", "ti,tpd12s015";
gpios = <0>, /* optional CT_CP_HPD */
<0>, /* optional LS_OE */
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* HPD */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tpd12s015_in: endpoint@0 {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
tpd12s015_out: endpoint@0 {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
}; };
&dra7_pmx_core { &dra7_pmx_core {
...@@ -485,3 +528,19 @@ partition@6 { ...@@ -485,3 +528,19 @@ partition@6 {
&cpu0 { &cpu0 {
vdd-supply = <&smps12_reg>; vdd-supply = <&smps12_reg>;
}; };
&hdmi {
status = "okay";
vdda-supply = <&ldo4_reg>;
port {
hdmi_out: endpoint {
remote-endpoint = <&tpd12s015_in>;
};
};
};
&dss {
status = "okay";
};
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
*/
#include "omap36xx.dtsi"
&sgx_module {
status = "disabled";
};
...@@ -4176,35 +4176,88 @@ usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */ ...@@ -4176,35 +4176,88 @@ usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */
}; };
target-module@170000 { /* 0x48970000, ap 21 0a.0 */ target-module@170000 { /* 0x48970000, ap 21 0a.0 */
compatible = "ti,sysc"; compatible = "ti,sysc-omap4", "ti,sysc";
status = "disabled"; reg = <0x170010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
ranges = <0x0 0x170000 0x10000>; ranges = <0x0 0x170000 0x10000>;
status = "disabled";
}; };
target-module@190000 { /* 0x48990000, ap 23 2e.0 */ target-module@190000 { /* 0x48990000, ap 23 2e.0 */
compatible = "ti,sysc"; compatible = "ti,sysc-omap4", "ti,sysc";
status = "disabled"; reg = <0x190010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
ranges = <0x0 0x190000 0x10000>; ranges = <0x0 0x190000 0x10000>;
status = "disabled";
}; };
target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */ target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */
compatible = "ti,sysc"; compatible = "ti,sysc-omap4", "ti,sysc";
status = "disabled"; reg = <0x1b0000 0x4>,
<0x1b0010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
ranges = <0x0 0x1b0000 0x10000>; ranges = <0x0 0x1b0000 0x10000>;
status = "disabled";
}; };
target-module@1d0000 { /* 0x489d0000, ap 27 30.0 */ target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
compatible = "ti,sysc"; compatible = "ti,sysc-omap4", "ti,sysc";
status = "disabled"; reg = <0x1d0010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
ranges = <0x0 0x1d0000 0x10000>; ranges = <0x0 0x1d0000 0x10000>;
vpe: vpe@0 {
compatible = "ti,dra7-vpe";
reg = <0x0000 0x120>,
<0x0700 0x80>,
<0x5700 0x18>,
<0xd000 0x400>;
reg-names = "vpe_top",
"sc",
"csc",
"vpdma";
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
};
}; };
}; };
}; };
......
...@@ -673,6 +673,24 @@ gpmc: gpmc@50000000 { ...@@ -673,6 +673,24 @@ gpmc: gpmc@50000000 {
status = "disabled"; status = "disabled";
}; };
target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5600fe00 0x4>,
<0x5600fe10 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x56000000 0x2000000>;
};
crossbar_mpu: crossbar@4a002a48 { crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar"; compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>; reg = <0x4a002a48 0x130>;
......
...@@ -187,6 +187,12 @@ vmmcwl_fixed: fixedregulator-mmcwl { ...@@ -187,6 +187,12 @@ vmmcwl_fixed: fixedregulator-mmcwl {
gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>; gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
enable-active-high; enable-active-high;
}; };
clk_ov5640_fixed: clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
}; };
&dra7_pmx_core { &dra7_pmx_core {
...@@ -269,6 +275,23 @@ p1 { ...@@ -269,6 +275,23 @@ p1 {
line-name = "vin6_sel_s0"; line-name = "vin6_sel_s0";
}; };
}; };
ov5640@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
clocks = <&clk_ov5640_fixed>;
clock-names = "xclk";
port {
csi2_cam0: endpoint {
remote-endpoint = <&csi2_phy0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
}; };
&uart1 { &uart1 {
...@@ -580,3 +603,11 @@ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { ...@@ -580,3 +603,11 @@ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
&pcie1_rc { &pcie1_rc {
status = "okay"; status = "okay";
}; };
&csi2_0 {
csi2_phy0: endpoint {
remote-endpoint = <&csi2_cam0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
...@@ -17,6 +17,48 @@ pmu { ...@@ -17,6 +17,48 @@ pmu {
}; };
}; };
&l4_per2 {
target-module@5b000 { /* 0x4845b000, ap 59 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x5b000 0x4>,
<0x5b010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>;
clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x5b000 0x1000>;
cal: cal@0 {
compatible = "ti,dra72-cal";
reg = <0x0000 0x400>,
<0x0800 0x40>,
<0x0900 0x40>;
reg-names = "cal_top",
"cal_rx_core0",
"cal_rx_core1";
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
ti,camerrx-control = <&scm_conf 0xE94>;
ports {
#address-cells = <1>;
#size-cells = <0>;
csi2_0: port@0 {
reg = <0>;
};
csi2_1: port@1 {
reg = <1>;
};
};
};
};
};
&dss { &dss {
reg = <0x58000000 0x80>, reg = <0x58000000 0x80>,
<0x58004054 0x4>, <0x58004054 0x4>,
......
...@@ -13,6 +13,13 @@ / { ...@@ -13,6 +13,13 @@ / {
model = "TI DRA762 EVM"; model = "TI DRA762 EVM";
compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"; compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
aliases {
display0 = &hdmi0;
sound0 = &sound0;
sound1 = &hdmi;
};
memory@0 { memory@0 {
device_type = "memory"; device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>; reg = <0x0 0x80000000 0x0 0x80000000>;
...@@ -116,6 +123,54 @@ aic_dvdd: fixedregulator-aic_dvdd { ...@@ -116,6 +123,54 @@ aic_dvdd: fixedregulator-aic_dvdd {
regulator-min-microvolt = <1800000>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>; regulator-max-microvolt = <1800000>;
}; };
clk_ov5640_fixed: clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&tpd12s015_out>;
};
};
};
tpd12s015: encoder {
compatible = "ti,tpd12s015";
gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>, /* gpio7_30, CT CP HPD */
<&gpio7 31 GPIO_ACTIVE_HIGH>, /* gpio7_31, LS OE */
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
}; };
&i2c1 { &i2c1 {
...@@ -317,6 +372,27 @@ tlv320aic3106: tlv320aic3106@19 { ...@@ -317,6 +372,27 @@ tlv320aic3106: tlv320aic3106@19 {
}; };
}; };
&i2c5 {
status = "okay";
clock-frequency = <400000>;
ov5640@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
clocks = <&clk_ov5640_fixed>;
clock-names = "xclk";
port {
csi2_cam0: endpoint {
remote-endpoint = <&csi2_phy0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
};
&cpu0 { &cpu0 {
vdd-supply = <&buck10_reg>; vdd-supply = <&buck10_reg>;
}; };
...@@ -411,6 +487,23 @@ &usb2_phy2 { ...@@ -411,6 +487,23 @@ &usb2_phy2 {
phy-supply = <&ldo3_reg>; phy-supply = <&ldo3_reg>;
}; };
&dss {
status = "ok";
vdda_video-supply = <&ldo5_reg>;
};
&hdmi {
status = "ok";
vdda-supply = <&ldo1_reg>;
port {
hdmi_out: endpoint {
remote-endpoint = <&tpd12s015_in>;
};
};
};
&qspi { &qspi {
spi-max-frequency = <96000000>; spi-max-frequency = <96000000>;
m25p80@0 { m25p80@0 {
...@@ -447,3 +540,11 @@ can-transceiver { ...@@ -447,3 +540,11 @@ can-transceiver {
max-bitrate = <5000000>; max-bitrate = <5000000>;
}; };
}; };
&csi2_0 {
csi2_phy0: endpoint {
remote-endpoint = <&csi2_cam0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
...@@ -41,6 +41,48 @@ m_can0: mcan@1a00 { ...@@ -41,6 +41,48 @@ m_can0: mcan@1a00 {
}; };
&l4_per3 {
target-module@1b0000 { /* 0x489b0000, ap 25 34.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x1b0000 0x4>,
<0x1b0010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>;
clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1b0000 0x10000>;
cal: cal@0 {
compatible = "ti,dra76-cal";
reg = <0x0000 0x400>,
<0x0800 0x40>,
<0x0900 0x40>;
reg-names = "cal_top",
"cal_rx_core0",
"cal_rx_core1";
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
ti,camerrx-control = <&scm_conf 0x6dc>;
ports {
#address-cells = <1>;
#size-cells = <0>;
csi2_0: port@0 {
reg = <0>;
};
csi2_1: port@1 {
reg = <1>;
};
};
};
};
};
/* MCAN interrupts are hard-wired to irqs 67, 68 */ /* MCAN interrupts are hard-wired to irqs 67, 68 */
&crossbar_mpu { &crossbar_mpu {
ti,irqs-skip = <10 67 68 133 139 140>; ti,irqs-skip = <10 67 68 133 139 140>;
......
...@@ -1591,10 +1591,10 @@ dsp2_clkctrl: dsp2-clkctrl@20 { ...@@ -1591,10 +1591,10 @@ dsp2_clkctrl: dsp2-clkctrl@20 {
rtc_cm: rtc-cm@700 { rtc_cm: rtc-cm@700 {
compatible = "ti,omap4-cm"; compatible = "ti,omap4-cm";
reg = <0x700 0x100>; reg = <0x700 0x60>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
ranges = <0 0x700 0x100>; ranges = <0 0x700 0x60>;
rtc_clkctrl: rtc-clkctrl@20 { rtc_clkctrl: rtc-clkctrl@20 {
compatible = "ti,clkctrl"; compatible = "ti,clkctrl";
...@@ -1603,6 +1603,20 @@ rtc_clkctrl: rtc-clkctrl@20 { ...@@ -1603,6 +1603,20 @@ rtc_clkctrl: rtc-clkctrl@20 {
}; };
}; };
vpe_cm: vpe-cm@760 {
compatible = "ti,omap4-cm";
reg = <0x760 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x760 0xc>;
vpe_clkctrl: vpe-clkctrl@0 {
compatible = "ti,clkctrl";
reg = <0x0 0xc>;
#clock-cells = <2>;
};
};
}; };
&cm_core { &cm_core {
...@@ -1720,6 +1734,20 @@ l3instr_clkctrl: l3instr-clkctrl@20 { ...@@ -1720,6 +1734,20 @@ l3instr_clkctrl: l3instr-clkctrl@20 {
}; };
}; };
cam_cm: cam-cm@1000 {
compatible = "ti,omap4-cm";
reg = <0x1000 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1000 0x100>;
cam_clkctrl: cam-clkctrl@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x2c>;
#clock-cells = <2>;
};
};
dss_cm: dss-cm@1100 { dss_cm: dss-cm@1100 {
compatible = "ti,omap4-cm"; compatible = "ti,omap4-cm";
reg = <0x1100 0x100>; reg = <0x1100 0x100>;
......
...@@ -27,11 +27,12 @@ cpcap_battery: battery { ...@@ -27,11 +27,12 @@ cpcap_battery: battery {
compatible = "motorola,cpcap-battery"; compatible = "motorola,cpcap-battery";
interrupts-extended = < interrupts-extended = <
&cpcap 6 0 &cpcap 5 0 &cpcap 3 0 &cpcap 6 0 &cpcap 5 0 &cpcap 3 0
&cpcap 20 0 &cpcap 54 0 &cpcap 20 0 &cpcap 54 0 &cpcap 57 0
>; >;
interrupt-names = interrupt-names =
"eol", "lowbph", "lowbpl", "eol", "lowbph", "lowbpl",
"chrgcurr1", "battdetb"; "chrgcurr1", "battdetb",
"cccal";
io-channels = <&cpcap_adc 0 &cpcap_adc 1 io-channels = <&cpcap_adc 0 &cpcap_adc 1
&cpcap_adc 5 &cpcap_adc 6>; &cpcap_adc 5 &cpcap_adc 6>;
io-channel-names = "battdetb", "battp", io-channel-names = "battdetb", "battp",
......
...@@ -249,6 +249,13 @@ hdmi_out: endpoint { ...@@ -249,6 +249,13 @@ hdmi_out: endpoint {
}; };
}; };
/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
&hdqw1w {
pinctrl-0 = <&hdq_pins>;
pinctrl-names = "default";
ti,mode = "1w";
};
&i2c1 { &i2c1 {
tmp105@48 { tmp105@48 {
compatible = "ti,tmp105"; compatible = "ti,tmp105";
...@@ -440,6 +447,13 @@ OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) ...@@ -440,6 +447,13 @@ OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
>; >;
}; };
hdq_pins: pinmux_hdq_pins {
pinctrl-single,pins = <
/* 0x4a100120 hdq_sio.hdq_sio aa27 */
OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
>;
};
/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
dss_hdmi_pins: pinmux_dss_hdmi_pins { dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = < pinctrl-single,pins = <
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2019 André Hentschel <nerv@dawncrow.de>
*/
/dts-v1/;
#include "dm3725.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Amazon Echo (first generation)";
compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3";
cpus {
cpu@0 {
cpu0-supply = <&vdd1_reg>;
};
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0xc600000>; /* 198 MB */
};
vcc5v: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vcc5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
vcc3v3: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vcc1v8: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <40>;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&button_pins>;
mute-button {
label = "mute";
linux,code = <KEY_MUTE>;
gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; /* GPIO_70 */
wakeup-source;
};
help-button {
label = "help";
linux,code = <KEY_HELP>;
gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; /* GPIO_72 */
wakeup-source;
};
};
rotary: rotary-encoder {
compatible = "rotary-encoder";
gpios = <
&gpio3 5 GPIO_ACTIVE_HIGH /* GPIO_69 */
&gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */
>;
linux,axis = <REL_X>;
rotary-encoder,relative-axis;
};
};
&i2c1 {
clock-frequency = <400000>;
tps: tps@2d {
reg = <0x2d>;
};
};
&i2c2 {
clock-frequency = <400000>;
lp5523A: lp5523A@32 {
compatible = "national,lp5523";
label = "q1";
reg = <0x32>;
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
chan0 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan1 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan2 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan3 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan4 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan5 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan6 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan7 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan8 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
};
lp5523B: lp5523B@33 {
compatible = "national,lp5523";
label = "q3";
reg = <0x33>;
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
chan0 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan1 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan2 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan3 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan4 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan5 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan6 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan7 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan8 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
};
lp5523C: lp5523C@34 {
compatible = "national,lp5523";
label = "q4";
reg = <0x34>;
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
chan0 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan1 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan2 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan3 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan4 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan5 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan6 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan7 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan8 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
};
lp5523D: lp552D@35 {
compatible = "national,lp5523";
label = "q2";
reg = <0x35>;
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
chan0 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan1 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan2 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan3 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan4 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan5 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan6 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan7 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
chan8 {
led-cur = /bits/ 8 <12>;
max-cur = /bits/ 8 <15>;
};
};
};
#include "tps65910.dtsi"
&omap3_pmx_core {
tps_pins: pinmux_tps_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
>;
};
button_pins: pinmux_button_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */
OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */
>;
};
};
&omap3_pmx_core2 {
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
>;
};
};
&mmc1 {
status = "okay";
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc_reg>;
};
&mmc2 {
status = "okay";
bus-width = <8>;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&vmmc_reg>;
};
&mmc3 {
status = "okay";
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vcc3v3>;
vqmmc-supply = <&vcc1v8>;
};
&tps {
pinctrl-names = "default";
pinctrl-0 = <&tps_pins>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
ti,en-ck32k-xtal;
ti,system-power-controller;
vcc1-supply = <&vcc5v>;
vcc2-supply = <&vcc5v>;
vcc3-supply = <&vcc5v>;
vcc4-supply = <&vcc5v>;
vcc5-supply = <&vcc5v>;
vcc6-supply = <&vcc5v>;
vcc7-supply = <&vcc5v>;
vccio-supply = <&vcc5v>;
regulators {
vio_reg: regulator@1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd1_reg: regulator@2 {
regulator-name = "vdd_mpu";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
vdd2_reg: regulator@3 {
regulator-name = "vdd_dsp";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vdd3_reg: regulator@4 {
regulator-name = "vdd_core";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
vdig1_reg: regulator@5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2700000>;
regulator-always-on;
};
vdig2_reg: regulator@6 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vpll_reg: regulator@7 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vdac_reg: regulator@8 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vaux1_reg: regulator@9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
vaux2_reg: regulator@10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vaux33_reg: regulator@11 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vmmc_reg: regulator@12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
};
};
...@@ -606,7 +606,7 @@ static struct clockdomain cam_7xx_clkdm = { ...@@ -606,7 +606,7 @@ static struct clockdomain cam_7xx_clkdm = {
.dep_bit = DRA7XX_CAM_STATDEP_SHIFT, .dep_bit = DRA7XX_CAM_STATDEP_SHIFT,
.wkdep_srcs = cam_wkup_sleep_deps, .wkdep_srcs = cam_wkup_sleep_deps,
.sleepdep_srcs = cam_wkup_sleep_deps, .sleepdep_srcs = cam_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP, .flags = CLKDM_CAN_SWSUP,
}; };
static struct clockdomain l4per_7xx_clkdm = { static struct clockdomain l4per_7xx_clkdm = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment