Commit 1a4049dd authored by Paul Gortmaker's avatar Paul Gortmaker Committed by James Bottomley

[SCSI] aci7xxx_old: delete decade+ obsolete driver

After getting warnings in an allyesconfig build[1] from this
driver, I decided to remind myself just how old it was, and
whether it warranted fixing.  In the Kconfig help text, I found:

  "This driver will eventually be phased out entirely"

Going back to the history archive, I see the line was added[2]
in Feb 2002, when we moved from v2.4.2.1 ---> v2.4.2.2

So, with over a decade of notification, and multiple major releases
since then, I think we can justify removing this.  Currently we have
people wasting time building it during routine testing, and then
wasting more time re-researching the known reported warnings, only to
find that nobody really is willing to integrate the fixes[3] for it.

A quick search didn't seem to indicate any active user base for it.
If someone happens to have a quirky _old_ card that the eleven year
old "new" driver doesn't work with, then it is entirely reasonable
that they stick with a kernel version that predates this removal.

[1] drivers/scsi/aic7xxx_old.c: In function ‘aic7xxx_register’:
    drivers/scsi/aic7xxx_old.c:7901:5: warning: case value ‘257’ not in enumerated type ‘ahc_chip’ [-Wswitch]
    drivers/scsi/aic7xxx_old.c:7898:5: warning: case value ‘513’ not in enumerated type ‘ahc_chip’ [-Wswitch]
    drivers/scsi/aic7xxx_old.c: In function ‘aic7xxx_load_seeprom’:
    drivers/scsi/aic7xxx_old.c:8517:5: warning: case value ‘257’ not in enumerated type ‘ahc_chip’ [-Wswitch]
    drivers/scsi/aic7xxx_old.c:8510:5: warning: case value ‘513’ not in enumerated type ‘ahc_chip’ [-Wswitch]

[2] http://git.kernel.org/cgit/linux/kernel/git/tglx/history.git commit 44e8778c

[3] https://lkml.org/lkml/2012/10/29/215Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: default avatarHannes Reinecke <hare@suse.de>
Acked-by: default avatarDoug Ledford <dledford@redhat.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 59ab3c93
...@@ -42,8 +42,6 @@ aic79xx.txt ...@@ -42,8 +42,6 @@ aic79xx.txt
- Adaptec Ultra320 SCSI host adapters - Adaptec Ultra320 SCSI host adapters
aic7xxx.txt aic7xxx.txt
- info on driver for Adaptec controllers - info on driver for Adaptec controllers
aic7xxx_old.txt
- info on driver for Adaptec controllers, old generation
arcmsr_spec.txt arcmsr_spec.txt
- ARECA FIRMWARE SPEC (for IOP331 adapter) - ARECA FIRMWARE SPEC (for IOP331 adapter)
dc395x.txt dc395x.txt
......
This diff is collapsed.
...@@ -484,7 +484,6 @@ M: Hannes Reinecke <hare@suse.de> ...@@ -484,7 +484,6 @@ M: Hannes Reinecke <hare@suse.de>
L: linux-scsi@vger.kernel.org L: linux-scsi@vger.kernel.org
S: Maintained S: Maintained
F: drivers/scsi/aic7xxx/ F: drivers/scsi/aic7xxx/
F: drivers/scsi/aic7xxx_old/
AIMSLAB FM RADIO RECEIVER DRIVER AIMSLAB FM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl> M: Hans Verkuil <hverkuil@xs4all.nl>
......
...@@ -499,47 +499,6 @@ config SCSI_AACRAID ...@@ -499,47 +499,6 @@ config SCSI_AACRAID
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
config SCSI_AIC7XXX_OLD
tristate "Adaptec AIC7xxx support (old driver)"
depends on (ISA || EISA || PCI ) && SCSI
help
WARNING This driver is an older aic7xxx driver and is no longer
under active development. Adaptec, Inc. is writing a new driver to
take the place of this one, and it is recommended that whenever
possible, people should use the new Adaptec written driver instead
of this one. This driver will eventually be phased out entirely.
This is support for the various aic7xxx based Adaptec SCSI
controllers. These include the 274x EISA cards; 284x VLB cards;
2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
motherboard based SCSI controllers from Adaptec. It does not support
the AAA-13x RAID controllers from Adaptec, nor will it likely ever
support them. It does not support the 2920 cards from Adaptec that
use the Future Domain SCSI controller chip. For those cards, you
need the "Future Domain 16xx SCSI support" driver.
In general, if the controller is based on an Adaptec SCSI controller
chip from the aic777x series or the aic78xx series, this driver
should work. The only exception is the 7810 which is specifically
not supported (that's the RAID controller chip on the AAA-13x
cards).
Note that the AHA2920 SCSI host adapter is *not* supported by this
driver; choose "Future Domain 16xx SCSI support" instead if you have
one of those.
Information on the configuration options for this controller can be
found by checking the help file for each of the available
configuration options. You should read
<file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
contacting the maintainer with any questions. The SCSI-HOWTO,
available from <http://www.tldp.org/docs.html#howto>, can also
be of great help.
To compile this driver as a module, choose M here: the
module will be called aic7xxx_old.
source "drivers/scsi/aic7xxx/Kconfig.aic79xx" source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig" source "drivers/scsi/aic94xx/Kconfig"
source "drivers/scsi/mvsas/Kconfig" source "drivers/scsi/mvsas/Kconfig"
......
...@@ -70,7 +70,6 @@ obj-$(CONFIG_SCSI_AHA1740) += aha1740.o ...@@ -70,7 +70,6 @@ obj-$(CONFIG_SCSI_AHA1740) += aha1740.o
obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/ obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/
obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/ obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
obj-$(CONFIG_SCSI_AACRAID) += aacraid/ obj-$(CONFIG_SCSI_AACRAID) += aacraid/
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
obj-$(CONFIG_SCSI_PM8001) += pm8001/ obj-$(CONFIG_SCSI_PM8001) += pm8001/
obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_ISCI) += isci/
......
This diff is collapsed.
/*+M*************************************************************************
* Adaptec AIC7xxx device driver for Linux.
*
* Copyright (c) 1994 John Aycock
* The University of Calgary Department of Computer Science.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* $Id: aic7xxx.h,v 3.2 1996/07/23 03:37:26 deang Exp $
*-M*************************************************************************/
#ifndef _aic7xxx_h
#define _aic7xxx_h
#define AIC7XXX_H_VERSION "5.2.0"
#endif /* _aic7xxx_h */
This diff is collapsed.
This diff is collapsed.
/*+M*************************************************************************
* Adaptec AIC7xxx device driver proc support for Linux.
*
* Copyright (c) 1995, 1996 Dean W. Gehnert
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* ----------------------------------------------------------------
* o Modified from the EATA-DMA /proc support.
* o Additional support for device block statistics provided by
* Matthew Jacob.
* o Correction of overflow by Heinz Mauelshagen
* o Adittional corrections by Doug Ledford
*
* Dean W. Gehnert, deang@teleport.com, 05/01/96
*
* $Id: aic7xxx_proc.c,v 4.1 1997/06/97 08:23:42 deang Exp $
*-M*************************************************************************/
#define HDRB \
" 0 - 4K 4 - 16K 16 - 64K 64 - 256K 256K - 1M 1M+"
/*+F*************************************************************************
* Function:
* aic7xxx_show_info
*
* Description:
* Return information to handle /proc support for the driver.
*-F*************************************************************************/
int
aic7xxx_show_info(struct seq_file *m, struct Scsi_Host *HBAptr)
{
struct aic7xxx_host *p;
struct aic_dev_data *aic_dev;
struct scsi_device *sdptr;
unsigned char i;
unsigned char tindex;
for(p=first_aic7xxx; p && p->host != HBAptr; p=p->next)
;
if (!p)
{
seq_printf(m, "Can't find adapter for host number %d\n", HBAptr->host_no);
return 0;
}
p = (struct aic7xxx_host *) HBAptr->hostdata;
seq_printf(m, "Adaptec AIC7xxx driver version: ");
seq_printf(m, "%s/", AIC7XXX_C_VERSION);
seq_printf(m, "%s", AIC7XXX_H_VERSION);
seq_printf(m, "\n");
seq_printf(m, "Adapter Configuration:\n");
seq_printf(m, " SCSI Adapter: %s\n",
board_names[p->board_name_index]);
if (p->flags & AHC_TWIN)
seq_printf(m, " Twin Channel Controller ");
else
{
char *channel = "";
char *ultra = "";
char *wide = "Narrow ";
if (p->flags & AHC_MULTI_CHANNEL)
{
channel = " Channel A";
if (p->flags & (AHC_CHNLB|AHC_CHNLC))
channel = (p->flags & AHC_CHNLB) ? " Channel B" : " Channel C";
}
if (p->features & AHC_WIDE)
wide = "Wide ";
if (p->features & AHC_ULTRA3)
{
switch(p->chip & AHC_CHIPID_MASK)
{
case AHC_AIC7892:
case AHC_AIC7899:
ultra = "Ultra-160/m LVD/SE ";
break;
default:
ultra = "Ultra-3 LVD/SE ";
break;
}
}
else if (p->features & AHC_ULTRA2)
ultra = "Ultra-2 LVD/SE ";
else if (p->features & AHC_ULTRA)
ultra = "Ultra ";
seq_printf(m, " %s%sController%s ",
ultra, wide, channel);
}
switch(p->chip & ~AHC_CHIPID_MASK)
{
case AHC_VL:
seq_printf(m, "at VLB slot %d\n", p->pci_device_fn);
break;
case AHC_EISA:
seq_printf(m, "at EISA slot %d\n", p->pci_device_fn);
break;
default:
seq_printf(m, "at PCI %d/%d/%d\n", p->pci_bus,
PCI_SLOT(p->pci_device_fn), PCI_FUNC(p->pci_device_fn));
break;
}
if( !(p->maddr) )
{
seq_printf(m, " Programmed I/O Base: %lx\n", p->base);
}
else
{
seq_printf(m, " PCI MMAPed I/O Base: 0x%lx\n", p->mbase);
}
if( (p->chip & (AHC_VL | AHC_EISA)) )
{
seq_printf(m, " BIOS Memory Address: 0x%08x\n", p->bios_address);
}
seq_printf(m, " Adapter SEEPROM Config: %s\n",
(p->flags & AHC_SEEPROM_FOUND) ? "SEEPROM found and used." :
((p->flags & AHC_USEDEFAULTS) ? "SEEPROM not found, using defaults." :
"SEEPROM not found, using leftover BIOS values.") );
seq_printf(m, " Adaptec SCSI BIOS: %s\n",
(p->flags & AHC_BIOS_ENABLED) ? "Enabled" : "Disabled");
seq_printf(m, " IRQ: %d\n", HBAptr->irq);
seq_printf(m, " SCBs: Active %d, Max Active %d,\n",
p->activescbs, p->max_activescbs);
seq_printf(m, " Allocated %d, HW %d, "
"Page %d\n", p->scb_data->numscbs, p->scb_data->maxhscbs,
p->scb_data->maxscbs);
if (p->flags & AHC_EXTERNAL_SRAM)
seq_printf(m, " Using External SCB SRAM\n");
seq_printf(m, " Interrupts: %ld", p->isr_count);
if (p->chip & AHC_EISA)
{
seq_printf(m, " %s\n",
(p->pause & IRQMS) ? "(Level Sensitive)" : "(Edge Triggered)");
}
else
{
seq_printf(m, "\n");
}
seq_printf(m, " BIOS Control Word: 0x%04x\n",
p->bios_control);
seq_printf(m, " Adapter Control Word: 0x%04x\n",
p->adapter_control);
seq_printf(m, " Extended Translation: %sabled\n",
(p->flags & AHC_EXTEND_TRANS_A) ? "En" : "Dis");
seq_printf(m, "Disconnect Enable Flags: 0x%04x\n", p->discenable);
if (p->features & (AHC_ULTRA | AHC_ULTRA2))
{
seq_printf(m, " Ultra Enable Flags: 0x%04x\n", p->ultraenb);
}
seq_printf(m, "Default Tag Queue Depth: %d\n", aic7xxx_default_queue_depth);
seq_printf(m, " Tagged Queue By Device array for aic7xxx host "
"instance %d:\n", p->instance);
seq_printf(m, " {");
for(i=0; i < (MAX_TARGETS - 1); i++)
seq_printf(m, "%d,",aic7xxx_tag_info[p->instance].tag_commands[i]);
seq_printf(m, "%d}\n",aic7xxx_tag_info[p->instance].tag_commands[i]);
seq_printf(m, "\n");
seq_printf(m, "Statistics:\n\n");
list_for_each_entry(aic_dev, &p->aic_devs, list)
{
sdptr = aic_dev->SDptr;
tindex = sdptr->channel << 3 | sdptr->id;
seq_printf(m, "(scsi%d:%d:%d:%d)\n",
p->host_no, sdptr->channel, sdptr->id, sdptr->lun);
seq_printf(m, " Device using %s/%s",
(aic_dev->cur.width == MSG_EXT_WDTR_BUS_16_BIT) ?
"Wide" : "Narrow",
(aic_dev->cur.offset != 0) ?
"Sync transfers at " : "Async transfers.\n" );
if (aic_dev->cur.offset != 0)
{
struct aic7xxx_syncrate *sync_rate;
unsigned char options = aic_dev->cur.options;
int period = aic_dev->cur.period;
int rate = (aic_dev->cur.width ==
MSG_EXT_WDTR_BUS_16_BIT) ? 1 : 0;
sync_rate = aic7xxx_find_syncrate(p, &period, 0, &options);
if (sync_rate != NULL)
{
seq_printf(m, "%s MByte/sec, offset %d\n",
sync_rate->rate[rate],
aic_dev->cur.offset );
}
else
{
seq_printf(m, "3.3 MByte/sec, offset %d\n",
aic_dev->cur.offset );
}
}
seq_printf(m, " Transinfo settings: ");
seq_printf(m, "current(%d/%d/%d/%d), ",
aic_dev->cur.period,
aic_dev->cur.offset,
aic_dev->cur.width,
aic_dev->cur.options);
seq_printf(m, "goal(%d/%d/%d/%d), ",
aic_dev->goal.period,
aic_dev->goal.offset,
aic_dev->goal.width,
aic_dev->goal.options);
seq_printf(m, "user(%d/%d/%d/%d)\n",
p->user[tindex].period,
p->user[tindex].offset,
p->user[tindex].width,
p->user[tindex].options);
if(sdptr->simple_tags)
{
seq_printf(m, " Tagged Command Queueing Enabled, Ordered Tags %s, Depth %d/%d\n", sdptr->ordered_tags ? "Enabled" : "Disabled", sdptr->queue_depth, aic_dev->max_q_depth);
}
if(aic_dev->barrier_total)
seq_printf(m, " Total transfers %ld:\n (%ld/%ld/%ld/%ld reads/writes/REQ_BARRIER/Ordered Tags)\n",
aic_dev->r_total+aic_dev->w_total, aic_dev->r_total, aic_dev->w_total,
aic_dev->barrier_total, aic_dev->ordered_total);
else
seq_printf(m, " Total transfers %ld:\n (%ld/%ld reads/writes)\n",
aic_dev->r_total+aic_dev->w_total, aic_dev->r_total, aic_dev->w_total);
seq_printf(m, "%s\n", HDRB);
seq_printf(m, " Reads:");
for (i = 0; i < ARRAY_SIZE(aic_dev->r_bins); i++)
{
seq_printf(m, " %10ld", aic_dev->r_bins[i]);
}
seq_printf(m, "\n");
seq_printf(m, " Writes:");
for (i = 0; i < ARRAY_SIZE(aic_dev->w_bins); i++)
{
seq_printf(m, " %10ld", aic_dev->w_bins[i]);
}
seq_printf(m, "\n");
seq_printf(m, "\n\n");
}
return 0;
}
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
* adjust the settings for this buffer only. This must remain at the end
* of the file.
* ---------------------------------------------------------------------------
* Local variables:
* c-indent-level: 2
* c-brace-imaginary-offset: 0
* c-brace-offset: -2
* c-argdecl-indent: 2
* c-label-offset: -2
* c-continued-statement-offset: 2
* c-continued-brace-offset: 0
* indent-tabs-mode: nil
* tab-width: 8
* End:
*/
This diff is collapsed.
This diff is collapsed.
/* Messages (1 byte) */ /* I/T (M)andatory or (O)ptional */
#define MSG_CMDCOMPLETE 0x00 /* M/M */
#define MSG_EXTENDED 0x01 /* O/O */
#define MSG_SAVEDATAPOINTER 0x02 /* O/O */
#define MSG_RESTOREPOINTERS 0x03 /* O/O */
#define MSG_DISCONNECT 0x04 /* O/O */
#define MSG_INITIATOR_DET_ERR 0x05 /* M/M */
#define MSG_ABORT 0x06 /* O/M */
#define MSG_MESSAGE_REJECT 0x07 /* M/M */
#define MSG_NOOP 0x08 /* M/M */
#define MSG_PARITY_ERROR 0x09 /* M/M */
#define MSG_LINK_CMD_COMPLETE 0x0a /* O/O */
#define MSG_LINK_CMD_COMPLETEF 0x0b /* O/O */
#define MSG_BUS_DEV_RESET 0x0c /* O/M */
#define MSG_ABORT_TAG 0x0d /* O/O */
#define MSG_CLEAR_QUEUE 0x0e /* O/O */
#define MSG_INIT_RECOVERY 0x0f /* O/O */
#define MSG_REL_RECOVERY 0x10 /* O/O */
#define MSG_TERM_IO_PROC 0x11 /* O/O */
/* Messages (2 byte) */
#define MSG_SIMPLE_Q_TAG 0x20 /* O/O */
#define MSG_HEAD_OF_Q_TAG 0x21 /* O/O */
#define MSG_ORDERED_Q_TAG 0x22 /* O/O */
#define MSG_IGN_WIDE_RESIDUE 0x23 /* O/O */
/* Identify message */ /* M/M */
#define MSG_IDENTIFYFLAG 0x80
#define MSG_IDENTIFY_DISCFLAG 0x40
#define MSG_IDENTIFY(lun, disc) (((disc) ? 0xc0 : MSG_IDENTIFYFLAG) | (lun))
#define MSG_ISIDENTIFY(m) ((m) & MSG_IDENTIFYFLAG)
/* Extended messages (opcode and length) */
#define MSG_EXT_SDTR 0x01
#define MSG_EXT_SDTR_LEN 0x03
#define MSG_EXT_WDTR 0x03
#define MSG_EXT_WDTR_LEN 0x02
#define MSG_EXT_WDTR_BUS_8_BIT 0x00
#define MSG_EXT_WDTR_BUS_16_BIT 0x01
#define MSG_EXT_WDTR_BUS_32_BIT 0x02
#define MSG_EXT_PPR 0x04
#define MSG_EXT_PPR_LEN 0x06
#define MSG_EXT_PPR_OPTION_ST 0x00
#define MSG_EXT_PPR_OPTION_DT_CRC 0x02
#define MSG_EXT_PPR_OPTION_DT_UNITS 0x03
#define MSG_EXT_PPR_OPTION_DT_CRC_QUICK 0x04
#define MSG_EXT_PPR_OPTION_DT_UNITS_QUICK 0x05
/*
* Instruction formats for the sequencer program downloaded to
* Aic7xxx SCSI host adapters
*
* Copyright (c) 1997, 1998 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Where this Software is combined with software released under the terms of
* the GNU General Public License ("GPL") and the terms of the GPL would require the
* combined work to also be released under the terms of the GPL, the terms
* and conditions of this License will apply in addition to those of the
* GPL with the exception of any terms or conditions of this License that
* conflict with, or are expressly prohibited by, the GPL.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: sequencer.h,v 1.3 1997/09/27 19:37:31 gibbs Exp $
*/
#ifdef __LITTLE_ENDIAN_BITFIELD
struct ins_format1 {
unsigned int
immediate : 8,
source : 9,
destination : 9,
ret : 1,
opcode : 4,
parity : 1;
};
struct ins_format2 {
unsigned int
shift_control : 8,
source : 9,
destination : 9,
ret : 1,
opcode : 4,
parity : 1;
};
struct ins_format3 {
unsigned int
immediate : 8,
source : 9,
address : 10,
opcode : 4,
parity : 1;
};
#elif defined(__BIG_ENDIAN_BITFIELD)
struct ins_format1 {
unsigned int
parity : 1,
opcode : 4,
ret : 1,
destination : 9,
source : 9,
immediate : 8;
};
struct ins_format2 {
unsigned int
parity : 1,
opcode : 4,
ret : 1,
destination : 9,
source : 9,
shift_control : 8;
};
struct ins_format3 {
unsigned int
parity : 1,
opcode : 4,
address : 10,
source : 9,
immediate : 8;
};
#endif
union ins_formats {
struct ins_format1 format1;
struct ins_format2 format2;
struct ins_format3 format3;
unsigned char bytes[4];
unsigned int integer;
};
struct instruction {
union ins_formats format;
unsigned int srcline;
struct symbol *patch_label;
struct {
struct instruction *stqe_next;
} links;
};
#define AIC_OP_OR 0x0
#define AIC_OP_AND 0x1
#define AIC_OP_XOR 0x2
#define AIC_OP_ADD 0x3
#define AIC_OP_ADC 0x4
#define AIC_OP_ROL 0x5
#define AIC_OP_BMOV 0x6
#define AIC_OP_JMP 0x8
#define AIC_OP_JC 0x9
#define AIC_OP_JNC 0xa
#define AIC_OP_CALL 0xb
#define AIC_OP_JNE 0xc
#define AIC_OP_JNZ 0xd
#define AIC_OP_JE 0xe
#define AIC_OP_JZ 0xf
/* Pseudo Ops */
#define AIC_OP_SHL 0x10
#define AIC_OP_SHR 0x20
#define AIC_OP_ROR 0x30
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment