mtd: lpddr: Move function print_drs_error to lpddr_cmds.c

Function print_drs_error is only used in drivers/mtd/lpddr/lpddr_cmds.c
so, better to move it there.

Also, notice that there's no need for inline as the function is used
once.  Lastly, fix the following checkpatch warning:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+static void print_drs_error(unsigned dsr)
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/e0063cbd65f3b47be1db34efc494ea3047634d88.1588016644.git.gustavo@embeddedor.com

drivers/mtd/lpddr/lpddr_cmds.c

@@ -94,6 +94,34 @@ struct mtd_info *lpddr_cmdset(struct map_info *map)
 }
 EXPORT_SYMBOL(lpddr_cmdset);
 
+static void print_drs_error(unsigned int dsr)
+{
+	int prog_status = (dsr & DSR_RPS) >> 8;
+
+	if (!(dsr & DSR_AVAILABLE))
+		pr_notice("DSR.15: (0) Device not Available\n");
+	if ((prog_status & 0x03) == 0x03)
+		pr_notice("DSR.9,8: (11) Attempt to program invalid half with 41h command\n");
+	else if (prog_status & 0x02)
+		pr_notice("DSR.9,8: (10) Object Mode Program attempt in region with Control Mode data\n");
+	else if (prog_status &  0x01)
+		pr_notice("DSR.9,8: (01) Program attempt in region with Object Mode data\n");
+	if (!(dsr & DSR_READY_STATUS))
+		pr_notice("DSR.7: (0) Device is Busy\n");
+	if (dsr & DSR_ESS)
+		pr_notice("DSR.6: (1) Erase Suspended\n");
+	if (dsr & DSR_ERASE_STATUS)
+		pr_notice("DSR.5: (1) Erase/Blank check error\n");
+	if (dsr & DSR_PROGRAM_STATUS)
+		pr_notice("DSR.4: (1) Program Error\n");
+	if (dsr & DSR_VPPS)
+		pr_notice("DSR.3: (1) Vpp low detect, operation aborted\n");
+	if (dsr & DSR_PSS)
+		pr_notice("DSR.2: (1) Program suspended\n");
+	if (dsr & DSR_DPS)
+		pr_notice("DSR.1: (1) Aborted Erase/Program attempt on locked block\n");
+}
+
 static int wait_for_ready(struct map_info *map, struct flchip *chip,
 		unsigned int chip_op_time)
 {

include/linux/mtd/pfow.h

@@ -121,32 +121,4 @@ static inline void send_pfow_command(struct map_info *map,
 	map_write(map, CMD(LPDDR_START_EXECUTION),
 			map->pfow_base + PFOW_COMMAND_EXECUTE);
 }
-
-static inline void print_drs_error(unsigned dsr)
-{
-	int prog_status = (dsr & DSR_RPS) >> 8;
-
-	if (!(dsr & DSR_AVAILABLE))
-		pr_notice("DSR.15: (0) Device not Available\n");
-	if ((prog_status & 0x03) == 0x03)
-		pr_notice("DSR.9,8: (11) Attempt to program invalid half with 41h command\n");
-	else if (prog_status & 0x02)
-		pr_notice("DSR.9,8: (10) Object Mode Program attempt in region with Control Mode data\n");
-	else if (prog_status &  0x01)
-		pr_notice("DSR.9,8: (01) Program attempt in region with Object Mode data\n");
-	if (!(dsr & DSR_READY_STATUS))
-		pr_notice("DSR.7: (0) Device is Busy\n");
-	if (dsr & DSR_ESS)
-		pr_notice("DSR.6: (1) Erase Suspended\n");
-	if (dsr & DSR_ERASE_STATUS)
-		pr_notice("DSR.5: (1) Erase/Blank check error\n");
-	if (dsr & DSR_PROGRAM_STATUS)
-		pr_notice("DSR.4: (1) Program Error\n");
-	if (dsr & DSR_VPPS)
-		pr_notice("DSR.3: (1) Vpp low detect, operation aborted\n");
-	if (dsr & DSR_PSS)
-		pr_notice("DSR.2: (1) Program suspended\n");
-	if (dsr & DSR_DPS)
-		pr_notice("DSR.1: (1) Aborted Erase/Program attempt on locked block\n");
-}
 #endif /* __LINUX_MTD_PFOW_H */