ARM: dts: colibri-imx6ull: Disable usb over-current

Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.

This will prevent the warning "No over current polarity defined" from
being printed on boot.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6ull-colibri-aster.dtsi

@@ -130,11 +130,13 @@ &uart5 {
 };
 
 &usbotg1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi

@@ -106,11 +106,13 @@ &uart5 {
 };
 
 &usbotg1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };

arch/arm/boot/dts/imx6ull-colibri-iris.dtsi

@@ -117,11 +117,13 @@ &uart5 {
 };
 
 &usbotg1 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };