media: get rid of i2c-addr.h

In the past, the same I2C address were used on multiple places.
After I2C rebinding changes, this is no longer needed. So, we
can just get rid of this header, placing the I2C address where
they belong, e. g. either at bttv driver or at tvtuner.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/i2c/tda7432.c

@@ -36,7 +36,6 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-ctrls.h>
-#include <media/i2c-addr.h>
 
 #ifndef VIDEO_AUDIO_BALANCE
 # define VIDEO_AUDIO_BALANCE 32

drivers/media/i2c/tvaudio.c

@@ -40,8 +40,6 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-ctrls.h>
 
-#include <media/i2c-addr.h>
-
 /* ---------------------------------------------------------------------- */
 /* insmod args                                                            */
 

drivers/media/pci/bt8xx/bttv-cards.c

@@ -141,6 +141,13 @@ MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
 
+
+/* I2C addresses list */
+#define I2C_ADDR_TDA7432	0x8a
+#define I2C_ADDR_MSP3400	0x80
+#define I2C_ADDR_MSP3400_ALT	0x88
+
+
 /* ----------------------------------------------------------------------- */
 /* list of card IDs for bt878+ cards                                       */
 

drivers/media/pci/bt8xx/bttv.h

@@ -18,7 +18,6 @@
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 #include <media/v4l2-device.h>
-#include <media/i2c-addr.h>
 #include <media/tuner.h>
 
 /* ---------------------------------------------------------- */

drivers/media/usb/em28xx/em28xx-cards.c

@@ -36,7 +36,6 @@
 #include <media/i2c/saa7115.h>
 #include <dt-bindings/media/tvp5150.h>
 #include <media/i2c/tvaudio.h>
-#include <media/i2c-addr.h>
 #include <media/tveeprom.h>
 #include <media/v4l2-common.h>
 #include <sound/ac97_codec.h>

drivers/media/usb/tm6000/tm6000-cards.c

@@ -13,7 +13,6 @@
 #include <media/v4l2-common.h>
 #include <media/tuner.h>
 #include <media/i2c/tvaudio.h>
-#include <media/i2c-addr.h>
 #include <media/rc-map.h>
 
 #include "tm6000.h"

include/media/i2c-addr.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *	V4L I2C address list
- *
- *
- *	Copyright (C) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
- *	Based on a previous mapping by
- *	Ralph Metzler (rjkm@thp.uni-koeln.de)
- *	Gerd Knorr <kraxel@goldbach.in-berlin.de>
- *
- */
-
-/* bttv address list */
-#define I2C_ADDR_TDA7432	0x8a
-#define I2C_ADDR_TDA8425	0x82
-#define I2C_ADDR_TDA9840	0x84
-#define I2C_ADDR_TDA9874	0xb0 /* also used by 9875 */
-#define I2C_ADDR_TDA9875	0xb0
-#define I2C_ADDR_MSP3400	0x80
-#define I2C_ADDR_MSP3400_ALT	0x88
-#define I2C_ADDR_TEA6300	0x80 /* also used by 6320 */
-
-/*
- * i2c bus addresses for the chips supported by tvaudio.c
- */
-
-#define I2C_ADDR_TDA8425	0x82
-#define I2C_ADDR_TDA9840	0x84 /* also used by TA8874Z */
-#define I2C_ADDR_TDA985x_L	0xb4 /* also used by 9873 */
-#define I2C_ADDR_TDA985x_H	0xb6
-#define I2C_ADDR_TDA9874	0xb0 /* also used by 9875 */
-
-#define I2C_ADDR_TEA6300	0x80 /* also used by 6320 */
-#define I2C_ADDR_TEA6420	0x98
-
-#define I2C_ADDR_PIC16C54	0x96 /* PV951 */

include/media/i2c/tvaudio.h

@@ -21,7 +21,22 @@
 #ifndef _TVAUDIO_H
 #define _TVAUDIO_H
 
-#include <media/i2c-addr.h>
+/*
+ * i2c bus addresses for the chips supported by tvaudio.c
+ */
+
+#define I2C_ADDR_TDA8425	0x82
+#define I2C_ADDR_TDA9840	0x84
+#define I2C_ADDR_TDA9874	0xb0 /* also used by 9875 */
+#define I2C_ADDR_TDA9875	0xb0
+#define I2C_ADDR_TDA8425	0x82
+#define I2C_ADDR_TDA9840	0x84 /* also used by TA8874Z */
+#define I2C_ADDR_TDA985x_L	0xb4 /* also used by 9873 */
+#define I2C_ADDR_TDA985x_H	0xb6
+#define I2C_ADDR_TDA9874	0xb0 /* also used by 9875 */
+#define I2C_ADDR_TEA6300	0x80 /* also used by 6320 */
+#define I2C_ADDR_TEA6420	0x98
+#define I2C_ADDR_PIC16C54	0x96 /* PV951 */
 
 /* The tvaudio module accepts the following inputs: */
 #define TVAUDIO_INPUT_TUNER  0