Commit 1ac49427 authored by Marek Szyprowski's avatar Marek Szyprowski Committed by Krzysztof Kozlowski

ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board

Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI,
no eMMC, no built-in USB3.0 hub, no extension port pins, and no GPIO
button. USB3.0 ports are used for built-in JMicron USB to SATA bridge
and Gigabit R8152 ethernet chips. HC1 uses only passive cooling.
Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
parent a798f2f0
......@@ -176,6 +176,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
exynos5422-odroidhc1.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
exynos5422-odroidxu4.dtb \
......
/*
* Hardkernel Odroid XU3/XU4/HC1 boards core device tree source
*
* Copyright (c) 2017 Marek Szyprowski
* Copyright (c) 2013-2017 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include "exynos5800.dtsi"
#include "exynos5422-cpus.dtsi"
/ {
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x7EA00000>;
};
chosen {
stdout-path = "serial2:115200n8";
};
firmware@02073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
fixed-rate-clocks {
oscclk {
compatible = "samsung,exynos5420-oscclk";
clock-frequency = <24000000>;
};
};
};
&bus_wcore {
devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
<&nocp_mem1_0>, <&nocp_mem1_1>;
vdd-supply = <&buck3_reg>;
exynos,saturation-ratio = <100>;
status = "okay";
};
&bus_noc {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_fsys_apb {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_fsys {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_fsys2 {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_mfc {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_gen {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_peri {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_g2d {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_g2d_acp {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_jpeg {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_jpeg_apb {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_disp1_fimd {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_disp1 {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_gscl_scaler {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_mscl {
devfreq = <&bus_wcore>;
status = "okay";
};
&cpu0 {
cpu-supply = <&buck6_reg>;
};
&cpu4 {
cpu-supply = <&buck2_reg>;
};
&hsi2c_4 {
status = "okay";
s2mps11_pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
samsung,s2mps11-acokb-ground;
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps11_irq>;
s2mps11_osc: clocks {
#clock-cells = <1>;
clock-output-names = "s2mps11_ap",
"s2mps11_cp", "s2mps11_bt";
};
regulators {
ldo1_reg: LDO1 {
regulator-name = "vdd_ldo1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "vddq_mmc0";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo4_reg: LDO4 {
regulator-name = "vdd_adc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo5_reg: LDO5 {
regulator-name = "vdd_ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "vdd_ldo6";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "vdd_ldo7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "vdd_ldo8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo9_reg: LDO9 {
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "vdd_ldo12";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo13_reg: LDO13 {
regulator-name = "vddq_mmc2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-always-on;
};
ldo16_reg: LDO16 {
regulator-name = "vdd_ldo16";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
regulator-always-on;
};
ldo17_reg: LDO17 {
regulator-name = "tsp_avdd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo18_reg: LDO18 {
regulator-name = "vdd_emmc_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo19_reg: LDO19 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo24_reg: LDO24 {
regulator-name = "tsp_io";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo26_reg: LDO26 {
regulator-name = "vdd_ldo26";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "vdd_mem";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck6_reg: BUCK6 {
regulator-name = "vdd_kfc";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck7_reg: BUCK7 {
regulator-name = "vdd_1.0v_ldo";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck8_reg: BUCK8 {
regulator-name = "vdd_1.8v_ldo";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck9_reg: BUCK9 {
regulator-name = "vdd_2.8v_ldo";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3750000>;
regulator-always-on;
regulator-boot-on;
};
buck10_reg: BUCK10 {
regulator-name = "vdd_vmem";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
&mmc_2 {
status = "okay";
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
cap-sd-highspeed;
vmmc-supply = <&ldo19_reg>;
vqmmc-supply = <&ldo13_reg>;
};
&nocp_mem0_0 {
status = "okay";
};
&nocp_mem0_1 {
status = "okay";
};
&nocp_mem1_0 {
status = "okay";
};
&nocp_mem1_1 {
status = "okay";
};
&pinctrl_0 {
s2mps11_irq: s2mps11-irq {
samsung,pins = "gpx0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
&tmu_cpu0 {
vtmu-supply = <&ldo7_reg>;
};
&tmu_cpu1 {
vtmu-supply = <&ldo7_reg>;
};
&tmu_cpu2 {
vtmu-supply = <&ldo7_reg>;
};
&tmu_cpu3 {
vtmu-supply = <&ldo7_reg>;
};
&tmu_gpu {
vtmu-supply = <&ldo7_reg>;
};
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
&usbdrd_dwc3_0 {
dr_mode = "host";
};
/* usbdrd_dwc3_1 mode customized in each board */
&usbdrd3_0 {
vdd33-supply = <&ldo9_reg>;
vdd10-supply = <&ldo11_reg>;
};
&usbdrd3_1 {
vdd33-supply = <&ldo9_reg>;
vdd10-supply = <&ldo11_reg>;
};
/*
* Hardkernel Odroid HC1 board device tree source
*
* Copyright (c) 2017 Marek Szyprowski
* Copyright (c) 2017 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos5422-odroid-core.dtsi"
/ {
model = "Hardkernel Odroid HC1";
compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \
"samsung,exynos5";
pwmleds {
compatible = "pwm-leds";
blueled {
label = "blue:heartbeat";
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
max_brightness = <255>;
linux,default-trigger = "heartbeat";
};
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0 0>;
trips {
cpu0_alert0: cpu-alert-0 {
temperature = <70000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu0_alert1: cpu-alert-1 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu0_crit0: cpu-crit-0 {
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
/*
* When reaching cpu0_alert0, reduce CPU
* by 2 steps. On Exynos5422/5800 that would
* be: 1600 MHz and 1100 MHz.
*/
map0 {
trip = <&cpu0_alert0>;
cooling-device = <&cpu0 0 2>;
};
map1 {
trip = <&cpu0_alert0>;
cooling-device = <&cpu4 0 2>;
};
/*
* When reaching cpu0_alert1, reduce CPU
* further, down to 600 MHz (12 steps for big,
* 7 steps for LITTLE).
*/
map2 {
trip = <&cpu0_alert1>;
cooling-device = <&cpu0 3 7>;
};
map3 {
trip = <&cpu0_alert1>;
cooling-device = <&cpu4 3 12>;
};
};
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1 0>;
trips {
cpu1_alert0: cpu-alert-0 {
temperature = <70000>;
hysteresis = <10000>;
type = "active";
};
cpu1_alert1: cpu-alert-1 {
temperature = <85000>;
hysteresis = <10000>;
type = "active";
};
cpu1_crit0: cpu-crit-0 {
temperature = <120000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu1_alert0>;
cooling-device = <&cpu0 0 2>;
};
map1 {
trip = <&cpu1_alert0>;
cooling-device = <&cpu4 0 2>;
};
map2 {
trip = <&cpu1_alert1>;
cooling-device = <&cpu0 3 7>;
};
map3 {
trip = <&cpu1_alert1>;
cooling-device = <&cpu4 3 12>;
};
};
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2 0>;
trips {
cpu2_alert0: cpu-alert-0 {
temperature = <70000>;
hysteresis = <10000>;
type = "active";
};
cpu2_alert1: cpu-alert-1 {
temperature = <85000>;
hysteresis = <10000>;
type = "active";
};
cpu2_crit0: cpu-crit-0 {
temperature = <120000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu2_alert0>;
cooling-device = <&cpu0 0 2>;
};
map1 {
trip = <&cpu2_alert0>;
cooling-device = <&cpu4 0 2>;
};
map2 {
trip = <&cpu2_alert1>;
cooling-device = <&cpu0 3 7>;
};
map3 {
trip = <&cpu2_alert1>;
cooling-device = <&cpu4 3 12>;
};
};
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3 0>;
trips {
cpu3_alert0: cpu-alert-0 {
temperature = <70000>;
hysteresis = <10000>;
type = "active";
};
cpu3_alert1: cpu-alert-1 {
temperature = <85000>;
hysteresis = <10000>;
type = "active";
};
cpu3_crit0: cpu-crit-0 {
temperature = <120000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu3_alert0>;
cooling-device = <&cpu0 0 2>;
};
map1 {
trip = <&cpu3_alert0>;
cooling-device = <&cpu4 0 2>;
};
map2 {
trip = <&cpu3_alert1>;
cooling-device = <&cpu0 3 7>;
};
map3 {
trip = <&cpu3_alert1>;
cooling-device = <&cpu4 3 12>;
};
};
};
};
};
&pwm {
/*
* PWM 2 -- Blue LED
*/
pinctrl-0 = <&pwm2_out>;
pinctrl-names = "default";
samsung,pwm-outputs = <2>;
status = "okay";
};
&usbdrd_dwc3_1 {
dr_mode = "host";
};
......@@ -12,35 +12,10 @@
* published by the Free Software Foundation.
*/
#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include "exynos5800.dtsi"
#include "exynos5422-cpus.dtsi"
#include "exynos5422-odroid-core.dtsi"
/ {
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x7EA00000>;
};
chosen {
stdout-path = "serial2:115200n8";
};
firmware@02073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
fixed-rate-clocks {
oscclk {
compatible = "samsung,exynos5420-oscclk";
clock-frequency = <24000000>;
};
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
......@@ -371,97 +346,6 @@ &adc {
status = "okay";
};
&bus_wcore {
devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
<&nocp_mem1_0>, <&nocp_mem1_1>;
vdd-supply = <&buck3_reg>;
exynos,saturation-ratio = <100>;
status = "okay";
};
&bus_noc {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_fsys_apb {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_fsys {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_fsys2 {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_mfc {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_gen {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_peri {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_g2d {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_g2d_acp {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_jpeg {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_jpeg_apb {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_disp1_fimd {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_disp1 {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_gscl_scaler {
devfreq = <&bus_wcore>;
status = "okay";
};
&bus_mscl {
devfreq = <&bus_wcore>;
status = "okay";
};
&cpu0 {
cpu-supply = <&buck6_reg>;
};
&cpu4 {
cpu-supply = <&buck2_reg>;
};
&hdmi {
status = "okay";
ddc = <&i2c_2>;
......@@ -479,237 +363,6 @@ &hdmicec {
needs-hpd;
};
&hsi2c_4 {
status = "okay";
s2mps11_pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
samsung,s2mps11-acokb-ground;
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps11_irq>;
s2mps11_osc: clocks {
#clock-cells = <1>;
clock-output-names = "s2mps11_ap",
"s2mps11_cp", "s2mps11_bt";
};
regulators {
ldo1_reg: LDO1 {
regulator-name = "vdd_ldo1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "vddq_mmc0";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo4_reg: LDO4 {
regulator-name = "vdd_adc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo5_reg: LDO5 {
regulator-name = "vdd_ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "vdd_ldo6";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "vdd_ldo7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "vdd_ldo8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo9_reg: LDO9 {
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "vdd_ldo12";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo13_reg: LDO13 {
regulator-name = "vddq_mmc2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-always-on;
};
ldo16_reg: LDO16 {
regulator-name = "vdd_ldo16";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
regulator-always-on;
};
ldo17_reg: LDO17 {
regulator-name = "tsp_avdd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ldo18_reg: LDO18 {
regulator-name = "vdd_emmc_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo19_reg: LDO19 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo24_reg: LDO24 {
regulator-name = "tsp_io";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ldo26_reg: LDO26 {
regulator-name = "vdd_ldo26";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "vdd_mem";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck6_reg: BUCK6 {
regulator-name = "vdd_kfc";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck7_reg: BUCK7 {
regulator-name = "vdd_1.0v_ldo";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck8_reg: BUCK8 {
regulator-name = "vdd_1.8v_ldo";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck9_reg: BUCK9 {
regulator-name = "vdd_2.8v_ldo";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3750000>;
regulator-always-on;
regulator-boot-on;
};
buck10_reg: BUCK10 {
regulator-name = "vdd_vmem";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
};
};
};
};
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
......@@ -740,36 +393,6 @@ &mmc_0 {
vqmmc-supply = <&ldo3_reg>;
};
&mmc_2 {
status = "okay";
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
cap-sd-highspeed;
vmmc-supply = <&ldo19_reg>;
vqmmc-supply = <&ldo13_reg>;
};
&nocp_mem0_0 {
status = "okay";
};
&nocp_mem0_1 {
status = "okay";
};
&nocp_mem1_0 {
status = "okay";
};
&nocp_mem1_1 {
status = "okay";
};
&pinctrl_0 {
power_key: power-key {
samsung,pins = "gpx0-3";
......@@ -784,13 +407,6 @@ hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
s2mps11_irq: s2mps11-irq {
samsung,pins = "gpx0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
&pinctrl_1 {
......@@ -801,45 +417,3 @@ emmc_nrst_pin: emmc-nrst {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
&tmu_cpu0 {
vtmu-supply = <&ldo7_reg>;
};
&tmu_cpu1 {
vtmu-supply = <&ldo7_reg>;
};
&tmu_cpu2 {
vtmu-supply = <&ldo7_reg>;
};
&tmu_cpu3 {
vtmu-supply = <&ldo7_reg>;
};
&tmu_gpu {
vtmu-supply = <&ldo7_reg>;
};
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
&usbdrd_dwc3_0 {
dr_mode = "host";
};
/* usbdrd_dwc3_1 mode customized in each board */
&usbdrd3_0 {
vdd33-supply = <&ldo9_reg>;
vdd10-supply = <&ldo11_reg>;
};
&usbdrd3_1 {
vdd33-supply = <&ldo9_reg>;
vdd10-supply = <&ldo11_reg>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment