docs: bridge: add netfilter doc

Add netfilter part for bridge document.
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Documentation/networking/bridge.rst

@@ -251,6 +251,42 @@ kernel.
 
 Please see the :ref:`switchdev` document for more details.
 
+Netfilter
+=========
+
+The bridge netfilter module is a legacy feature that allows to filter bridged
+packets with iptables and ip6tables. Its use is discouraged. Users should
+consider using nftables for packet filtering.
+
+The older ebtables tool is more feature-limited compared to nftables, but
+just like nftables it doesn't need this module either to function.
+
+The br_netfilter module intercepts packets entering the bridge, performs
+minimal sanity tests on ipv4 and ipv6 packets and then pretends that
+these packets are being routed, not bridged. br_netfilter then calls
+the ip and ipv6 netfilter hooks from the bridge layer, i.e. ip(6)tables
+rulesets will also see these packets.
+
+br_netfilter is also the reason for the iptables *physdev* match:
+This match is the only way to reliably tell routed and bridged packets
+apart in an iptables ruleset.
+
+Note that ebtables and nftables will work fine without the br_netfilter module.
+iptables/ip6tables/arptables do not work for bridged traffic because they
+plug in the routing stack. nftables rules in ip/ip6/inet/arp families won't
+see traffic that is forwarded by a bridge either, but that's very much how it
+should be.
+
+Historically the feature set of ebtables was very limited (it still is),
+this module was added to pretend packets are routed and invoke the ipv4/ipv6
+netfilter hooks from the bridge so users had access to the more feature-rich
+iptables matching capabilities (including conntrack). nftables doesn't have
+this limitation, pretty much all features work regardless of the protocol family.
+
+So, br_netfilter is only needed if users, for some reason, need to use
+ip(6)tables to filter packets forwarded by the bridge, or NAT bridged
+traffic. For pure link layer filtering, this module isn't needed.
+
 FAQ
 ===