Merge tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:

 - A new EDAC AST 2500 SoC driver (Stefan M Schaeckeler)

 - New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck)

 - Altera SDRAM functionality carveout for separate enablement of RAS
   and SDRAM capabilities on some Altera chips. (Thor Thayer)

 - The usual round of cleanups and fixes

And last but not least: recruit James Morse as a reviewer for the ARM
side.

* tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC/altera: Add separate SDRAM EDAC config
  EDAC, altera: Add missing of_node_put()
  EDAC, skx_common: Add code to recognise new compound error code
  EDAC, i10nm: Fix randconfig builds
  EDAC, i10nm: Add a driver for Intel 10nm server processors
  EDAC, skx_edac: Delete duplicated code
  EDAC, skx_common: Separate common code out from skx_edac
  EDAC: Do not check return value of debugfs_create() functions
  EDAC: Add James Morse as a reviewer
  dt-bindings, EDAC: Add Aspeed AST2500
  EDAC, aspeed: Add an Aspeed AST2500 EDAC driver

Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt

+Aspeed AST2500 SoC EDAC node
+
+The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error
+correction check).
+
+The memory controller supports SECDED (single bit error correction, double bit
+error detection) and single bit error auto scrubbing by reserving 8 bits for
+every 64 bit word (effectively reducing available memory to 8/9).
+
+Note, the bootloader must configure ECC mode in the memory controller.
+
+
+Required properties:
+- compatible: should be "aspeed,ast2500-sdram-edac"
+- reg:        sdram controller register set should be <0x1e6e0000 0x174>
+- interrupts: should be AVIC interrupt #0
+
+
+Example:
+
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2500-sdram-edac";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <0>;
+	};

MAINTAINERS

@@ -5503,6 +5503,12 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/amd64_edac*
 
+EDAC-AST2500
+M:	Stefan Schaeckeler <sschaeck@cisco.com>
+S:	Supported
+F:	drivers/edac/aspeed_edac.c
+F:	Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
+
 EDAC-CALXEDA
 M:	Robert Richter <rric@kernel.org>
 L:	linux-edac@vger.kernel.org
@@ -5527,6 +5533,7 @@ F:	drivers/edac/thunderx_edac*
 EDAC-CORE
 M:	Borislav Petkov <bp@alien8.de>
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
+R:	James Morse <james.morse@arm.com>
 L:	linux-edac@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git for-next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac.git linux_next

arch/arm/boot/dts/aspeed-g5.dtsi

@@ -47,6 +47,13 @@ memory@80000000 {
 		reg = <0x80000000 0>;
 	};
 
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2500-sdram-edac";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <0>;
+		status = "disabled";
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;

drivers/edac/Kconfig

@@ -241,6 +241,18 @@ config EDAC_SKX
 	  system has non-volatile DIMMs you should also manually
 	  select CONFIG_ACPI_NFIT.
 
+config EDAC_I10NM
+	tristate "Intel 10nm server Integrated MC"
+	depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI
+	depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y
+	select DMI
+	select ACPI_ADXL
+	help
+	  Support for error detection and correction the Intel
+	  10nm server Integrated Memory Controllers. If your
+	  system has non-volatile DIMMs you should also manually
+	  select CONFIG_ACPI_NFIT.
+
 config EDAC_PND2
 	tristate "Intel Pondicherry2"
 	depends on PCI && X86_64 && X86_MCE_INTEL
@@ -379,9 +391,17 @@ config EDAC_ALTERA
 	depends on EDAC=y && (ARCH_SOCFPGA || ARCH_STRATIX10)
 	help
 	  Support for error detection and correction on the
-	  Altera SOCs. This must be selected for SDRAM ECC.
-	  Note that the preloader must initialize the SDRAM
-	  before loading the kernel.
+	  Altera SOCs. This is the global enable for the
+	  various Altera peripherals.
+
+config EDAC_ALTERA_SDRAM
+	bool "Altera SDRAM ECC"
+	depends on EDAC_ALTERA=y
+	help
+	  Support for error detection and correction on the
+	  Altera SDRAM Memory for Altera SoCs. Note that the
+	  preloader must initialize the SDRAM before loading
+	  the kernel.
 
 config EDAC_ALTERA_L2C
 	bool "Altera L2 Cache ECC"
@@ -475,4 +495,13 @@ config EDAC_QCOM
 	  For debugging issues having to do with stability and overall system
 	  health, you should probably say 'Y' here.
 
+config EDAC_ASPEED
+	tristate "Aspeed AST 2500 SoC"
+	depends on MACH_ASPEED_G5
+	help
+	  Support for error detection and correction on the Aspeed AST 2500 SoC.
+
+	  First, ECC must be configured in the bootloader. Then, this driver
+	  will expose error counters via the EDAC kernel framework.
+
 endif # EDAC

drivers/edac/Makefile

@@ -30,7 +30,6 @@ obj-$(CONFIG_EDAC_I5400)		+= i5400_edac.o
 obj-$(CONFIG_EDAC_I7300)		+= i7300_edac.o
 obj-$(CONFIG_EDAC_I7CORE)		+= i7core_edac.o
 obj-$(CONFIG_EDAC_SBRIDGE)		+= sb_edac.o
-obj-$(CONFIG_EDAC_SKX)			+= skx_edac.o
 obj-$(CONFIG_EDAC_PND2)			+= pnd2_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
@@ -58,6 +57,12 @@ obj-$(CONFIG_EDAC_MPC85XX)		+= mpc85xx_edac_mod.o
 layerscape_edac_mod-y			:= fsl_ddr_edac.o layerscape_edac.o
 obj-$(CONFIG_EDAC_LAYERSCAPE)		+= layerscape_edac_mod.o
 
+skx_edac-y				:= skx_common.o skx_base.o
+obj-$(CONFIG_EDAC_SKX)			+= skx_edac.o
+
+i10nm_edac-y				:= skx_common.o i10nm_base.o
+obj-$(CONFIG_EDAC_I10NM)		+= i10nm_edac.o
+
 obj-$(CONFIG_EDAC_MV64X60)		+= mv64x60_edac.o
 obj-$(CONFIG_EDAC_CELL)			+= cell_edac.o
 obj-$(CONFIG_EDAC_PPC4XX)		+= ppc4xx_edac.o
@@ -78,3 +83,4 @@ obj-$(CONFIG_EDAC_SYNOPSYS)		+= synopsys_edac.o
 obj-$(CONFIG_EDAC_XGENE)		+= xgene_edac.o
 obj-$(CONFIG_EDAC_TI)			+= ti_edac.o
 obj-$(CONFIG_EDAC_QCOM)			+= qcom_edac.o
+obj-$(CONFIG_EDAC_ASPEED)		+= aspeed_edac.o

drivers/edac/altera_edac.c

@@ -29,6 +29,7 @@
 #define EDAC_MOD_STR		"altera_edac"
 #define EDAC_DEVICE		"Altera"
 
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
 static const struct altr_sdram_prv_data c5_data = {
 	.ecc_ctrl_offset    = CV_CTLCFG_OFST,
 	.ecc_ctl_en_mask    = CV_CTLCFG_ECC_AUTO_EN,
@@ -468,6 +469,39 @@ static int altr_sdram_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/*
+ * If you want to suspend, need to disable EDAC by removing it
+ * from the device tree or defconfig.
+ */
+#ifdef CONFIG_PM
+static int altr_sdram_prepare(struct device *dev)
+{
+	pr_err("Suspend not allowed when EDAC is enabled.\n");
+
+	return -EPERM;
+}
+
+static const struct dev_pm_ops altr_sdram_pm_ops = {
+	.prepare = altr_sdram_prepare,
+};
+#endif
+
+static struct platform_driver altr_sdram_edac_driver = {
+	.probe = altr_sdram_probe,
+	.remove = altr_sdram_remove,
+	.driver = {
+		.name = "altr_sdram_edac",
+#ifdef CONFIG_PM
+		.pm = &altr_sdram_pm_ops,
+#endif
+		.of_match_table = altr_sdram_ctrl_of_match,
+	},
+};
+
+module_platform_driver(altr_sdram_edac_driver);
+
+#endif	/* CONFIG_EDAC_ALTERA_SDRAM */
+
 /**************** Stratix 10 EDAC Memory Controller Functions ************/
 
 /**
@@ -530,37 +564,6 @@ static const struct regmap_config s10_sdram_regmap_cfg = {
 
 /************** </Stratix10 EDAC Memory Controller Functions> ***********/
 
-/*
- * If you want to suspend, need to disable EDAC by removing it
- * from the device tree or defconfig.
- */
-#ifdef CONFIG_PM
-static int altr_sdram_prepare(struct device *dev)
-{
-	pr_err("Suspend not allowed when EDAC is enabled.\n");
-
-	return -EPERM;
-}
-
-static const struct dev_pm_ops altr_sdram_pm_ops = {
-	.prepare = altr_sdram_prepare,
-};
-#endif
-
-static struct platform_driver altr_sdram_edac_driver = {
-	.probe = altr_sdram_probe,
-	.remove = altr_sdram_remove,
-	.driver = {
-		.name = "altr_sdram_edac",
-#ifdef CONFIG_PM
-		.pm = &altr_sdram_pm_ops,
-#endif
-		.of_match_table = altr_sdram_ctrl_of_match,
-	},
-};
-
-module_platform_driver(altr_sdram_edac_driver);
-
 /************************* EDAC Parent Probe *************************/
 
 static const struct of_device_id altr_edac_device_of_match[];
@@ -1046,14 +1049,17 @@ altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
 			return -ENODEV;
 		}
 
-		if (of_address_to_resource(sysmgr_np, 0, &res))
+		if (of_address_to_resource(sysmgr_np, 0, &res)) {
+			of_node_put(sysmgr_np);
 			return -ENOMEM;
+		}
 
 		/* Need physical address for SMCC call */
 		base = res.start;
 
 		ecc_mgr_map = regmap_init(NULL, NULL, (void *)base,
 					  &s10_sdram_regmap_cfg);
+		of_node_put(sysmgr_np);
 	}
 	of_node_put(np_eccmgr);
 	if (IS_ERR(ecc_mgr_map)) {
@@ -2140,11 +2146,13 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 
 			altr_edac_a10_device_add(edac, child);
 
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
 		else if ((of_device_is_compatible(child, "altr,sdram-edac-a10")) ||
 			 (of_device_is_compatible(child, "altr,sdram-edac-s10")))
 			of_platform_populate(pdev->dev.of_node,
 					     altr_sdram_ctrl_of_match,
 					     NULL, &pdev->dev);
+#endif
 	}
 
 	return 0;

drivers/edac/debugfs.c

@@ -41,14 +41,9 @@ static const struct file_operations debug_fake_inject_fops = {
 	.llseek = generic_file_llseek,
 };
 
-int __init edac_debugfs_init(void)
+void __init edac_debugfs_init(void)
 {
 	edac_debugfs = debugfs_create_dir("edac", NULL);
-	if (IS_ERR(edac_debugfs)) {
-		edac_debugfs = NULL;
-		return -ENOMEM;
-	}
-	return 0;
 }
 
 void edac_debugfs_exit(void)
@@ -56,50 +51,31 @@ void edac_debugfs_exit(void)
 	debugfs_remove_recursive(edac_debugfs);
 }
 
-int edac_create_debugfs_nodes(struct mem_ctl_info *mci)
+void edac_create_debugfs_nodes(struct mem_ctl_info *mci)
 {
-	struct dentry *d, *parent;
+	struct dentry *parent;
 	char name[80];
 	int i;
 
-	if (!edac_debugfs)
-		return -ENODEV;
-
-	d = debugfs_create_dir(mci->dev.kobj.name, edac_debugfs);
-	if (!d)
-		return -ENOMEM;
-	parent = d;
+	parent = debugfs_create_dir(mci->dev.kobj.name, edac_debugfs);
 
 	for (i = 0; i < mci->n_layers; i++) {
 		sprintf(name, "fake_inject_%s",
 			     edac_layer_name[mci->layers[i].type]);
-		d = debugfs_create_u8(name, S_IRUGO | S_IWUSR, parent,
-				      &mci->fake_inject_layer[i]);
-		if (!d)
-			goto nomem;
+		debugfs_create_u8(name, S_IRUGO | S_IWUSR, parent,
+				  &mci->fake_inject_layer[i]);
 	}
 
-	d = debugfs_create_bool("fake_inject_ue", S_IRUGO | S_IWUSR, parent,
-				&mci->fake_inject_ue);
-	if (!d)
-		goto nomem;
+	debugfs_create_bool("fake_inject_ue", S_IRUGO | S_IWUSR, parent,
+			    &mci->fake_inject_ue);
 
-	d = debugfs_create_u16("fake_inject_count", S_IRUGO | S_IWUSR, parent,
-				&mci->fake_inject_count);
-	if (!d)
-		goto nomem;
+	debugfs_create_u16("fake_inject_count", S_IRUGO | S_IWUSR, parent,
+			   &mci->fake_inject_count);
 
-	d = debugfs_create_file("fake_inject", S_IWUSR, parent,
-				&mci->dev,
-				&debug_fake_inject_fops);
-	if (!d)
-		goto nomem;
+	debugfs_create_file("fake_inject", S_IWUSR, parent, &mci->dev,
+			    &debug_fake_inject_fops);
 
 	mci->debugfs = parent;
-	return 0;
-nomem:
-	edac_debugfs_remove_recursive(mci->debugfs);
-	return -ENOMEM;
 }
 
 /* Create a toplevel dir under EDAC's debugfs hierarchy */

drivers/edac/edac_module.h

@@ -69,9 +69,9 @@ extern void *edac_align_ptr(void **p, unsigned size, int n_elems);
 #define edac_debugfs_remove_recursive debugfs_remove_recursive
 #define edac_debugfs_remove debugfs_remove
 #ifdef CONFIG_EDAC_DEBUG
-int edac_debugfs_init(void);
+void edac_debugfs_init(void);
 void edac_debugfs_exit(void);
-int edac_create_debugfs_nodes(struct mem_ctl_info *mci);
+void edac_create_debugfs_nodes(struct mem_ctl_info *mci);
 struct dentry *edac_debugfs_create_dir(const char *dirname);
 struct dentry *
 edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent);
@@ -83,9 +83,9 @@ edac_debugfs_create_x8(const char *name, umode_t mode, struct dentry *parent, u8
 struct dentry *
 edac_debugfs_create_x16(const char *name, umode_t mode, struct dentry *parent, u16 *value);
 #else
-static inline int edac_debugfs_init(void)					{ return -ENODEV; }
+static inline void edac_debugfs_init(void)					{ }
 static inline void edac_debugfs_exit(void)					{ }
-static inline int edac_create_debugfs_nodes(struct mem_ctl_info *mci)		{ return 0; }
+static inline void edac_create_debugfs_nodes(struct mem_ctl_info *mci)		{ }
 static inline struct dentry *edac_debugfs_create_dir(const char *dirname)	{ return NULL; }
 static inline struct dentry *
 edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent)		{ return NULL; }

drivers/edac/i10nm_base.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Intel(R) 10nm server memory controller.
+ * Copyright (c) 2019, Intel Corporation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/mce.h>
+#include "edac_module.h"
+#include "skx_common.h"
+
+#define I10NM_REVISION	"v0.0.3"
+#define EDAC_MOD_STR	"i10nm_edac"
+
+/* Debug macros */
+#define i10nm_printk(level, fmt, arg...)	\
+	edac_printk(level, "i10nm", fmt, ##arg)
+
+#define I10NM_GET_SCK_BAR(d, reg)		\
+	pci_read_config_dword((d)->uracu, 0xd0, &(reg))
+#define I10NM_GET_IMC_BAR(d, i, reg)	\
+	pci_read_config_dword((d)->uracu, 0xd8 + (i) * 4, &(reg))
+#define I10NM_GET_DIMMMTR(m, i, j)	\
+	(*(u32 *)((m)->mbase + 0x2080c + (i) * 0x4000 + (j) * 4))
+#define I10NM_GET_MCDDRTCFG(m, i, j)	\
+	(*(u32 *)((m)->mbase + 0x20970 + (i) * 0x4000 + (j) * 4))
+
+#define I10NM_GET_SCK_MMIO_BASE(reg)	(GET_BITFIELD(reg, 0, 28) << 23)
+#define I10NM_GET_IMC_MMIO_OFFSET(reg)	(GET_BITFIELD(reg, 0, 10) << 12)
+#define I10NM_GET_IMC_MMIO_SIZE(reg)	((GET_BITFIELD(reg, 13, 23) - \
+					 GET_BITFIELD(reg, 0, 10) + 1) << 12)
+
+static struct list_head *i10nm_edac_list;
+
+static struct pci_dev *pci_get_dev_wrapper(int dom, unsigned int bus,
+					   unsigned int dev, unsigned int fun)
+{
+	struct pci_dev *pdev;
+
+	pdev = pci_get_domain_bus_and_slot(dom, bus, PCI_DEVFN(dev, fun));
+	if (!pdev) {
+		edac_dbg(2, "No device %02x:%02x.%x\n",
+			 bus, dev, fun);
+		return NULL;
+	}
+
+	if (unlikely(pci_enable_device(pdev) < 0)) {
+		edac_dbg(2, "Failed to enable device %02x:%02x.%x\n",
+			 bus, dev, fun);
+		return NULL;
+	}
+
+	pci_dev_get(pdev);
+
+	return pdev;
+}
+
+static int i10nm_get_all_munits(void)
+{
+	struct pci_dev *mdev;
+	void __iomem *mbase;
+	unsigned long size;
+	struct skx_dev *d;
+	int i, j = 0;
+	u32 reg, off;
+	u64 base;
+
+	list_for_each_entry(d, i10nm_edac_list, list) {
+		d->util_all = pci_get_dev_wrapper(d->seg, d->bus[1], 29, 1);
+		if (!d->util_all)
+			return -ENODEV;
+
+		d->uracu = pci_get_dev_wrapper(d->seg, d->bus[0], 0, 1);
+		if (!d->uracu)
+			return -ENODEV;
+
+		if (I10NM_GET_SCK_BAR(d, reg)) {
+			i10nm_printk(KERN_ERR, "Failed to socket bar\n");
+			return -ENODEV;
+		}
+
+		base = I10NM_GET_SCK_MMIO_BASE(reg);
+		edac_dbg(2, "socket%d mmio base 0x%llx (reg 0x%x)\n",
+			 j++, base, reg);
+
+		for (i = 0; i < I10NM_NUM_IMC; i++) {
+			mdev = pci_get_dev_wrapper(d->seg, d->bus[0],
+						   12 + i, 0);
+			if (i == 0 && !mdev) {
+				i10nm_printk(KERN_ERR, "No IMC found\n");
+				return -ENODEV;
+			}
+			if (!mdev)
+				continue;
+
+			d->imc[i].mdev = mdev;
+
+			if (I10NM_GET_IMC_BAR(d, i, reg)) {
+				i10nm_printk(KERN_ERR, "Failed to get mc bar\n");
+				return -ENODEV;
+			}
+
+			off  = I10NM_GET_IMC_MMIO_OFFSET(reg);
+			size = I10NM_GET_IMC_MMIO_SIZE(reg);
+			edac_dbg(2, "mc%d mmio base 0x%llx size 0x%lx (reg 0x%x)\n",
+				 i, base + off, size, reg);
+
+			mbase = ioremap(base + off, size);
+			if (!mbase) {
+				i10nm_printk(KERN_ERR, "Failed to ioremap 0x%llx\n",
+					     base + off);
+				return -ENODEV;
+			}
+
+			d->imc[i].mbase = mbase;
+		}
+	}
+
+	return 0;
+}
+
+static const struct x86_cpu_id i10nm_cpuids[] = {
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_TREMONT_X, 0, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(x86cpu, i10nm_cpuids);
+
+static bool i10nm_check_ecc(struct skx_imc *imc, int chan)
+{
+	u32 mcmtr;
+
+	mcmtr = *(u32 *)(imc->mbase + 0x20ef8 + chan * 0x4000);
+	edac_dbg(1, "ch%d mcmtr reg %x\n", chan, mcmtr);
+
+	return !!GET_BITFIELD(mcmtr, 2, 2);
+}
+
+static int i10nm_get_dimm_config(struct mem_ctl_info *mci)
+{
+	struct skx_pvt *pvt = mci->pvt_info;
+	struct skx_imc *imc = pvt->imc;
+	struct dimm_info *dimm;
+	u32 mtr, mcddrtcfg;
+	int i, j, ndimms;
+
+	for (i = 0; i < I10NM_NUM_CHANNELS; i++) {
+		if (!imc->mbase)
+			continue;
+
+		ndimms = 0;
+		for (j = 0; j < I10NM_NUM_DIMMS; j++) {
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+					     mci->n_layers, i, j, 0);
+			mtr = I10NM_GET_DIMMMTR(imc, i, j);
+			mcddrtcfg = I10NM_GET_MCDDRTCFG(imc, i, j);
+			edac_dbg(1, "dimmmtr 0x%x mcddrtcfg 0x%x (mc%d ch%d dimm%d)\n",
+				 mtr, mcddrtcfg, imc->mc, i, j);
+
+			if (IS_DIMM_PRESENT(mtr))
+				ndimms += skx_get_dimm_info(mtr, 0, dimm,
+							    imc, i, j);
+			else if (IS_NVDIMM_PRESENT(mcddrtcfg, j))
+				ndimms += skx_get_nvdimm_info(dimm, imc, i, j,
+							      EDAC_MOD_STR);
+		}
+		if (ndimms && !i10nm_check_ecc(imc, 0)) {
+			i10nm_printk(KERN_ERR, "ECC is disabled on imc %d\n",
+				     imc->mc);
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static struct notifier_block i10nm_mce_dec = {
+	.notifier_call	= skx_mce_check_error,
+	.priority	= MCE_PRIO_EDAC,
+};
+
+static int __init i10nm_init(void)
+{
+	u8 mc = 0, src_id = 0, node_id = 0;
+	const struct x86_cpu_id *id;
+	const char *owner;
+	struct skx_dev *d;
+	int rc, i, off[3] = {0xd0, 0xc8, 0xcc};
+	u64 tolm, tohm;
+
+	edac_dbg(2, "\n");
+
+	owner = edac_get_owner();
+	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
+		return -EBUSY;
+
+	id = x86_match_cpu(i10nm_cpuids);
+	if (!id)
+		return -ENODEV;
+
+	rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm);
+	if (rc)
+		return rc;
+
+	rc = skx_get_all_bus_mappings(0x3452, 0xcc, I10NM, &i10nm_edac_list);
+	if (rc < 0)
+		goto fail;
+	if (rc == 0) {
+		i10nm_printk(KERN_ERR, "No memory controllers found\n");
+		return -ENODEV;
+	}
+
+	rc = i10nm_get_all_munits();
+	if (rc < 0)
+		goto fail;
+
+	list_for_each_entry(d, i10nm_edac_list, list) {
+		rc = skx_get_src_id(d, &src_id);
+		if (rc < 0)
+			goto fail;
+
+		rc = skx_get_node_id(d, &node_id);
+		if (rc < 0)
+			goto fail;
+
+		edac_dbg(2, "src_id = %d node_id = %d\n", src_id, node_id);
+		for (i = 0; i < I10NM_NUM_IMC; i++) {
+			if (!d->imc[i].mdev)
+				continue;
+
+			d->imc[i].mc  = mc++;
+			d->imc[i].lmc = i;
+			d->imc[i].src_id  = src_id;
+			d->imc[i].node_id = node_id;
+
+			rc = skx_register_mci(&d->imc[i], d->imc[i].mdev,
+					      "Intel_10nm Socket", EDAC_MOD_STR,
+					      i10nm_get_dimm_config);
+			if (rc < 0)
+				goto fail;
+		}
+	}
+
+	rc = skx_adxl_get();
+	if (rc)
+		goto fail;
+
+	opstate_init();
+	mce_register_decode_chain(&i10nm_mce_dec);
+	setup_skx_debug("i10nm_test");
+
+	i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION);
+
+	return 0;
+fail:
+	skx_remove();
+	return rc;
+}
+
+static void __exit i10nm_exit(void)
+{
+	edac_dbg(2, "\n");
+	teardown_skx_debug();
+	mce_unregister_decode_chain(&i10nm_mce_dec);
+	skx_adxl_put();
+	skx_remove();
+}
+
+module_init(i10nm_init);
+module_exit(i10nm_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MC Driver for Intel 10nm server processors");

drivers/edac/skx_common.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Common codes for both the skx_edac driver and Intel 10nm server EDAC driver.
+ * Originally split out from the skx_edac driver.
+ *
+ * Copyright (c) 2018, Intel Corporation.
+ */
+
+#ifndef _SKX_COMM_EDAC_H
+#define _SKX_COMM_EDAC_H
+
+#define MSG_SIZE		1024
+
+/*
+ * Debug macros
+ */
+#define skx_printk(level, fmt, arg...)			\
+	edac_printk(level, "skx", fmt, ##arg)
+
+#define skx_mc_printk(mci, level, fmt, arg...)		\
+	edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg)
+
+/*
+ * Get a bit field at register value <v>, from bit <lo> to bit <hi>
+ */
+#define GET_BITFIELD(v, lo, hi) \
+	(((v) & GENMASK_ULL((hi), (lo))) >> (lo))
+
+#define SKX_NUM_IMC		2	/* Memory controllers per socket */
+#define SKX_NUM_CHANNELS	3	/* Channels per memory controller */
+#define SKX_NUM_DIMMS		2	/* Max DIMMS per channel */
+
+#define I10NM_NUM_IMC		4
+#define I10NM_NUM_CHANNELS	2
+#define I10NM_NUM_DIMMS		2
+
+#define MAX(a, b)	((a) > (b) ? (a) : (b))
+#define NUM_IMC		MAX(SKX_NUM_IMC, I10NM_NUM_IMC)
+#define NUM_CHANNELS	MAX(SKX_NUM_CHANNELS, I10NM_NUM_CHANNELS)
+#define NUM_DIMMS	MAX(SKX_NUM_DIMMS, I10NM_NUM_DIMMS)
+
+#define IS_DIMM_PRESENT(r)		GET_BITFIELD(r, 15, 15)
+#define IS_NVDIMM_PRESENT(r, i)		GET_BITFIELD(r, i, i)
+
+/*
+ * Each cpu socket contains some pci devices that provide global
+ * information, and also some that are local to each of the two
+ * memory controllers on the die.
+ */
+struct skx_dev {
+	struct list_head list;
+	u8 bus[4];
+	int seg;
+	struct pci_dev *sad_all;
+	struct pci_dev *util_all;
+	struct pci_dev *uracu; /* for i10nm CPU */
+	u32 mcroute;
+	struct skx_imc {
+		struct mem_ctl_info *mci;
+		struct pci_dev *mdev; /* for i10nm CPU */
+		void __iomem *mbase;  /* for i10nm CPU */
+		u8 mc;	/* system wide mc# */
+		u8 lmc;	/* socket relative mc# */
+		u8 src_id, node_id;
+		struct skx_channel {
+			struct pci_dev	*cdev;
+			struct skx_dimm {
+				u8 close_pg;
+				u8 bank_xor_enable;
+				u8 fine_grain_bank;
+				u8 rowbits;
+				u8 colbits;
+			} dimms[NUM_DIMMS];
+		} chan[NUM_CHANNELS];
+	} imc[NUM_IMC];
+};
+
+struct skx_pvt {
+	struct skx_imc	*imc;
+};
+
+enum type {
+	SKX,
+	I10NM
+};
+
+enum {
+	INDEX_SOCKET,
+	INDEX_MEMCTRL,
+	INDEX_CHANNEL,
+	INDEX_DIMM,
+	INDEX_MAX
+};
+
+struct decoded_addr {
+	struct skx_dev *dev;
+	u64	addr;
+	int	socket;
+	int	imc;
+	int	channel;
+	u64	chan_addr;
+	int	sktways;
+	int	chanways;
+	int	dimm;
+	int	rank;
+	int	channel_rank;
+	u64	rank_address;
+	int	row;
+	int	column;
+	int	bank_address;
+	int	bank_group;
+};
+
+typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci);
+typedef bool (*skx_decode_f)(struct decoded_addr *res);
+
+int __init skx_adxl_get(void);
+void __exit skx_adxl_put(void);
+void skx_set_decode(skx_decode_f decode);
+
+int skx_get_src_id(struct skx_dev *d, u8 *id);
+int skx_get_node_id(struct skx_dev *d, u8 *id);
+
+int skx_get_all_bus_mappings(unsigned int did, int off, enum type,
+			     struct list_head **list);
+
+int skx_get_hi_lo(unsigned int did, int off[], u64 *tolm, u64 *tohm);
+
+int skx_get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
+		      struct skx_imc *imc, int chan, int dimmno);
+
+int skx_get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,
+			int chan, int dimmno, const char *mod_str);
+
+int skx_register_mci(struct skx_imc *imc, struct pci_dev *pdev,
+		     const char *ctl_name, const char *mod_str,
+		     get_dimm_config_f get_dimm_config);
+
+int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
+			void *data);
+
+void skx_remove(void);
+
+#ifdef CONFIG_EDAC_DEBUG
+void setup_skx_debug(const char *dirname);
+void teardown_skx_debug(void);
+#else
+static inline void setup_skx_debug(const char *dirname) {}
+static inline void teardown_skx_debug(void) {}
+#endif /*CONFIG_EDAC_DEBUG*/
+
+#endif /* _SKX_COMM_EDAC_H */