MIPS: loongson1: set default number of rx and tx queues for stmmac

Set the default number of RX and TX queues due to
the recent changes of stmmac driver.
Otherwise the ethernet will crash once it starts.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17452/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/loongson32/common/platform.c

@@ -183,18 +183,20 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
 }
 
 static struct plat_stmmacenet_data ls1x_eth0_pdata = {
-	.bus_id		= 0,
-	.phy_addr	= -1,
+	.bus_id			= 0,
+	.phy_addr		= -1,
 #if defined(CONFIG_LOONGSON1_LS1B)
-	.interface	= PHY_INTERFACE_MODE_MII,
+	.interface		= PHY_INTERFACE_MODE_MII,
 #elif defined(CONFIG_LOONGSON1_LS1C)
-	.interface	= PHY_INTERFACE_MODE_RMII,
+	.interface		= PHY_INTERFACE_MODE_RMII,
 #endif
-	.mdio_bus_data	= &ls1x_mdio_bus_data,
-	.dma_cfg	= &ls1x_eth_dma_cfg,
-	.has_gmac	= 1,
-	.tx_coe		= 1,
-	.init		= ls1x_eth_mux_init,
+	.mdio_bus_data		= &ls1x_mdio_bus_data,
+	.dma_cfg		= &ls1x_eth_dma_cfg,
+	.has_gmac		= 1,
+	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
+	.init			= ls1x_eth_mux_init,
 };
 
 static struct resource ls1x_eth0_resources[] = {
@@ -222,14 +224,16 @@ struct platform_device ls1x_eth0_pdev = {
 
 #ifdef CONFIG_LOONGSON1_LS1B
 static struct plat_stmmacenet_data ls1x_eth1_pdata = {
-	.bus_id		= 1,
-	.phy_addr	= -1,
-	.interface	= PHY_INTERFACE_MODE_MII,
-	.mdio_bus_data	= &ls1x_mdio_bus_data,
-	.dma_cfg	= &ls1x_eth_dma_cfg,
-	.has_gmac	= 1,
-	.tx_coe		= 1,
-	.init		= ls1x_eth_mux_init,
+	.bus_id			= 1,
+	.phy_addr		= -1,
+	.interface		= PHY_INTERFACE_MODE_MII,
+	.mdio_bus_data		= &ls1x_mdio_bus_data,
+	.dma_cfg		= &ls1x_eth_dma_cfg,
+	.has_gmac		= 1,
+	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
+	.init			= ls1x_eth_mux_init,
 };
 
 static struct resource ls1x_eth1_resources[] = {