Merge tag 'm1-soc-bringup-v5' of https://github.com/AsahiLinux/linux into arm/apple-m1

Apple M1 SoC platform bring-up

This series brings up initial support for the Apple M1 SoC, used in the
2020 Mac Mini, MacBook Pro, and MacBook Air models.

The following features are supported in this initial port:

- UART (samsung-style) with earlycon support
- Interrupts, including affinity and IPIs (Apple Interrupt Controller)
- SMP (through standard spin-table support)
- simplefb-based framebuffer
- Devicetree for the Mac Mini (should work for the others too at this
  stage)

== Merge notes ==

This tag is based on v5.12-rc3 and includes the following two
dependencies merged in:

* Tip of arm64/for-next/fiq: 3889ba70
  This is a hard (build) dependency that adds support for FIQ
  interrupts, which is required for this SoC and the included AIC
  irqchip driver. It is already merged in the arm64 tree.

* From tty/tty-next: 71b25f4d
  This commit includes the Samsung UART changes that have already
  been merged into the tty tree. It is nominally a soft dependency,
  but if this series is merged first it would trigger devicetree
  validation failures as the DT included in it depends on bindings
  introduced in the tty tree.

  There was a merge conflict here. It has been resolved the same
  way gregkh resolved it in a later tty merge, and both tty-next
  and torvalds/master merge cleanly with this series at this time.

This series additionally depends on the nVHE changes in [1] to boot,
but we are letting those get merged through arm64.

[1] https://lore.kernel.org/linux-arm-kernel/20210408131010.1109027-1-maz@kernel.org/T/#u

== Testing notes ==

This has been tested on an Apple M1 Mac Mini booting to a framebuffer
and serial console, with SMP and KASLR, with an arm64 defconfig
(+ CONFIG_FB_SIMPLE for the fb). In addition, the AIC driver now supports
running in EL1, tested in UP mode only.

== About the hardware ==

These machines officially support booting unsigned/user-provided
XNU-like kernels, with a very different boot protocol and devicetree
format. We are developing an initial bootloader, m1n1 [1], to take care
of as many hardware peculiarities as possible and present a standard
Linux arm64 boot protocol and device tree. In the future, I expect that
production setups will add U-Boot and perhaps GRUB into the boot chain,
to make the boot process similar to other ARM64 platforms.

The machines expose their debug UART over USB Type C, triggered with
vendor-specific USB-PD commands. Currently, the easiest way to get a
serial console on these machines is to use a second M1 box and a simple
USB C cable [2]. You can also build a DIY interface using an Arduino, a
FUSB302 chip or board, and a 1.2V UART-TTL adapter [3]. In the coming
weeks we will be designing an open hardware project to provide
serial/debug connectivity to these machines (and, hopefully, also
support other UART-over-Type C setups from other vendors). Please
contact me privately if you are interested in getting an early prototype
version of one of these devices.

We also have WIP/not merged yet support for loading kernels and
interacting via dwc3 usb-gadget, which works with a standard C-C or C-A
cable and any Linux host.

A quickstart guide to booting Linux kernels on these machines is
available at [4], and we are documenting the hardware at [5].

[1] https://github.com/AsahiLinux/m1n1/
[2] https://github.com/AsahiLinux/macvdmtool/
[3] https://github.com/AsahiLinux/vdmtool/
[4] https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart
[5] https://github.com/AsahiLinux/docs/wiki

== Project Blurb ==

Asahi Linux is an open community project dedicated to developing and
maintaining mainline support for Apple Silicon on Linux. Feel free to
drop by #asahi and #asahi-dev on freenode to chat with us, or check
our website for more information on the project:

https://asahilinux.org/Signed-off-by: Hector Martin <marcan@marcan.st>

* tag 'm1-soc-bringup-v5' of https://github.com/AsahiLinux/linux:
  arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree
  dt-bindings: display: Add apple,simple-framebuffer
  arm64: Kconfig: Introduce CONFIG_ARCH_APPLE
  irqchip/apple-aic: Add support for the Apple Interrupt Controller
  dt-bindings: interrupt-controller: Add DT bindings for apple-aic
  arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h
  of/address: Add infrastructure to declare MMIO as non-posted
  asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np
  arm64: Implement ioremap_np() to map MMIO as nGnRnE
  docs: driver-api: device-io: Document ioremap() variants & access funcs
  docs: driver-api: device-io: Document I/O access functions
  asm-generic/io.h:  Add a non-posted variant of ioremap()
  arm64: arch_timer: Implement support for interrupt-names
  dt-bindings: timer: arm,arch_timer: Add interrupt-names support
  arm64: cputype: Add CPU implementor & types for the Apple M1 cores
  dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles
  dt-bindings: arm: apple: Add bindings for Apple ARM platforms
  dt-bindings: vendor-prefixes: Add apple prefix

Link: https://lore.kernel.org/r/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.stSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/apple.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/apple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple ARM Machine Device Tree Bindings
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  ARM platforms using SoCs designed by Apple Inc., branded "Apple Silicon".
+
+  This currently includes devices based on the "M1" SoC, starting with the
+  three Mac models released in late 2020:
+
+  - Mac mini (M1, 2020)
+  - MacBook Pro (13-inch, M1, 2020)
+  - MacBook Air (M1, 2020)
+
+  The compatible property should follow this format:
+
+  compatible = "apple,<targettype>", "apple,<socid>", "apple,arm-platform";
+
+  <targettype> represents the board/device and comes from the `target-type`
+  property of the root node of the Apple Device Tree, lowercased. It can be
+  queried on macOS using the following command:
+
+  $ ioreg -d2 -l | grep target-type
+
+  <socid> is the lowercased SoC ID. Apple uses at least *five* different
+  names for their SoCs:
+
+  - Marketing name ("M1")
+  - Internal name ("H13G")
+  - Codename ("Tonga")
+  - SoC ID ("T8103")
+  - Package/IC part number ("APL1102")
+
+  Devicetrees should use the lowercased SoC ID, to avoid confusion if
+  multiple SoCs share the same marketing name. This can be obtained from
+  the `compatible` property of the arm-io node of the Apple Device Tree,
+  which can be queried as follows on macOS:
+
+  $ ioreg -n arm-io | grep compatible
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: Apple M1 SoC based platforms
+        items:
+          - enum:
+              - apple,j274 # Mac mini (M1, 2020)
+              - apple,j293 # MacBook Pro (13-inch, M1, 2020)
+              - apple,j313 # MacBook Air (M1, 2020)
+          - const: apple,t8103
+          - const: apple,arm-platform
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -85,6 +85,8 @@ properties:
 
   compatible:
     enum:
+      - apple,icestorm
+      - apple,firestorm
       - arm,arm710t
       - arm,arm720t
       - arm,arm740t

Documentation/devicetree/bindings/display/simple-framebuffer.yaml

@@ -54,6 +54,7 @@ properties:
   compatible:
     items:
       - enum:
+          - apple,simple-framebuffer
           - allwinner,simple-framebuffer
           - amlogic,simple-framebuffer
       - const: simple-framebuffer
@@ -84,9 +85,13 @@ properties:
       Format of the framebuffer:
         * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r
         * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b
+        * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b
+        * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
     enum:
       - a8b8g8r8
       - r5g6b5
+      - x2r10g10b10
+      - x8r8g8b8
 
   display:
     $ref: /schemas/types.yaml#/definitions/phandle

Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apple,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Interrupt Controller
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  The Apple Interrupt Controller is a simple interrupt controller present on
+  Apple ARM SoC platforms, including various iPhone and iPad devices and the
+  "Apple Silicon" Macs.
+
+  It provides the following features:
+
+  - Level-triggered hardware IRQs wired to SoC blocks
+    - Single mask bit per IRQ
+    - Per-IRQ affinity setting
+    - Automatic masking on event delivery (auto-ack)
+    - Software triggering (ORed with hw line)
+  - 2 per-CPU IPIs (meant as "self" and "other", but they are interchangeable
+    if not symmetric)
+  - Automatic prioritization (single event/ack register per CPU, lower IRQs =
+    higher priority)
+  - Automatic masking on ack
+  - Default "this CPU" register view and explicit per-CPU views
+
+  This device also represents the FIQ interrupt sources on platforms using AIC,
+  which do not go through a discrete interrupt controller.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: apple,t8103-aic
+      - const: apple,aic
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 3
+    description: |
+      The 1st cell contains the interrupt type:
+        - 0: Hardware IRQ
+        - 1: FIQ
+
+      The 2nd cell contains the interrupt number.
+        - HW IRQs: interrupt number
+        - FIQs:
+          - 0: physical HV timer
+          - 1: virtual HV timer
+          - 2: physical guest timer
+          - 3: virtual guest timer
+
+      The 3rd cell contains the interrupt flags. This is normally
+      IRQ_TYPE_LEVEL_HIGH (4).
+
+  reg:
+    description: |
+      Specifies base physical address and size of the AIC registers.
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aic: interrupt-controller@23b100000 {
+            compatible = "apple,t8103-aic", "apple,aic";
+            #interrupt-cells = <3>;
+            interrupt-controller;
+            reg = <0x2 0x3b100000 0x0 0x8000>;
+        };
+    };

Documentation/devicetree/bindings/timer/arm,arch_timer.yaml

@@ -34,11 +34,30 @@ properties:
               - arm,armv8-timer
 
   interrupts:
+    minItems: 1
+    maxItems: 5
     items:
       - description: secure timer irq
       - description: non-secure timer irq
       - description: virtual timer irq
       - description: hypervisor timer irq
+      - description: hypervisor virtual timer irq
+
+  interrupt-names:
+    oneOf:
+      - minItems: 2
+        items:
+          - const: phys
+          - const: virt
+          - const: hyp-phys
+          - const: hyp-virt
+      - minItems: 3
+        items:
+          - const: sec-phys
+          - const: phys
+          - const: virt
+          - const: hyp-phys
+          - const: hyp-virt
 
   clock-frequency:
     description: The frequency of the main counter, in Hz. Should be present

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -103,6 +103,8 @@ patternProperties:
     description: Anvo-Systems Dresden GmbH
   "^apm,.*":
     description: Applied Micro Circuits Corporation (APM)
+  "^apple,.*":
+    description: Apple Inc.
   "^aptina,.*":
     description: Aptina Imaging
   "^arasan,.*":

Documentation/driver-api/driver-model/devres.rst

@@ -309,6 +309,7 @@ IOMAP
   devm_ioremap()
   devm_ioremap_uc()
   devm_ioremap_wc()
+  devm_ioremap_np()
   devm_ioremap_resource() : checks resource, requests memory region, ioremaps
   devm_ioremap_resource_wc()
   devm_platform_ioremap_resource() : calls devm_ioremap_resource() for platform device

MAINTAINERS

@@ -1637,6 +1637,20 @@ F:	arch/arm/mach-alpine/
 F:	arch/arm64/boot/dts/amazon/
 F:	drivers/*/*alpine*
 
+ARM/APPLE MACHINE SUPPORT
+M:	Hector Martin <marcan@marcan.st>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+W:	https://asahilinux.org
+B:	https://github.com/AsahiLinux/linux/issues
+C:	irc://chat.freenode.net/asahi-dev
+T:	git https://github.com/AsahiLinux/linux.git
+F:	Documentation/devicetree/bindings/arm/apple.yaml
+F:	Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
+F:	arch/arm64/boot/dts/apple/
+F:	drivers/irqchip/irq-apple-aic.c
+F:	include/dt-bindings/interrupt-controller/apple-aic.h
+
 ARM/ARTPEC MACHINE SUPPORT
 M:	Jesper Nilsson <jesper.nilsson@axis.com>
 M:	Lars Persson <lars.persson@axis.com>

arch/arm64/Kconfig.platforms

@@ -36,6 +36,13 @@ config ARCH_ALPINE
 	  This enables support for the Annapurna Labs Alpine
 	  Soc family.
 
+config ARCH_APPLE
+	bool "Apple Silicon SoC family"
+	select APPLE_AIC
+	help
+	  This enables support for Apple's in-house ARM SoC family, starting
+	  with the Apple M1.
+
 config ARCH_BCM2835
 	bool "Broadcom BCM2835 family"
 	select TIMER_OF

arch/arm64/boot/dts/Makefile

@@ -6,6 +6,7 @@ subdir-y += amazon
 subdir-y += amd
 subdir-y += amlogic
 subdir-y += apm
+subdir-y += apple
 subdir-y += arm
 subdir-y += bitmain
 subdir-y += broadcom

arch/arm64/boot/dts/apple/Makefile

+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb

arch/arm64/boot/dts/apple/t8103-j274.dts

+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple Mac mini (M1, 2020)
+ *
+ * target-type: J274
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+
+/ {
+	compatible = "apple,j274", "apple,t8103", "apple,arm-platform";
+	model = "Apple Mac mini (M1, 2020)";
+
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};

arch/arm64/boot/dts/apple/t8103.dtsi

+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8103 "M1" SoC
+ *
+ * Other names: H13G, "Tonga"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "apple,t8103", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu2: cpu@2 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu3: cpu@3 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu4: cpu@10100 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu5: cpu@10101 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu6: cpu@10102 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu7: cpu@10103 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clk24: clock-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clk24";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		serial0: serial@235200000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35200000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 605 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * TODO: figure out the clocking properly, there may
+			 * be a third selectable clock.
+			 */
+			clocks = <&clk24>, <&clk24>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		aic: interrupt-controller@23b100000 {
+			compatible = "apple,t8103-aic", "apple,aic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x2 0x3b100000 0x0 0x8000>;
+		};
+	};
+};

arch/arm64/configs/defconfig

@@ -31,6 +31,7 @@ CONFIG_ARCH_ACTIONS=y
 CONFIG_ARCH_AGILEX=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_APPLE=y
 CONFIG_ARCH_BCM2835=y
 CONFIG_ARCH_BCM4908=y
 CONFIG_ARCH_BCM_IPROC=y

arch/arm64/include/asm/cputype.h

@@ -59,6 +59,7 @@
 #define ARM_CPU_IMP_NVIDIA		0x4E
 #define ARM_CPU_IMP_FUJITSU		0x46
 #define ARM_CPU_IMP_HISI		0x48
+#define ARM_CPU_IMP_APPLE		0x61
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
@@ -99,6 +100,9 @@
 
 #define HISI_CPU_PART_TSV110		0xD01
 
+#define APPLE_CPU_PART_M1_ICESTORM	0x022
+#define APPLE_CPU_PART_M1_FIRESTORM	0x023
+
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
@@ -127,6 +131,8 @@
 #define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL)
 #define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX)
 #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110)
+#define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM)
+#define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM)
 
 /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
 #define MIDR_FUJITSU_ERRATUM_010001		MIDR_FUJITSU_A64FX

arch/arm64/include/asm/io.h

@@ -169,16 +169,7 @@ extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
 
 #define ioremap(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
 #define ioremap_wc(addr, size)		__ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
-
-/*
- * PCI configuration space mapping function.
- *
- * The PCI specification disallows posted write configuration transactions.
- * Add an arch specific pci_remap_cfgspace() definition that is implemented
- * through nGnRnE device memory attribute as recommended by the ARM v8
- * Architecture reference manual Issue A.k B2.8.2 "Device memory".
- */
-#define pci_remap_cfgspace(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRnE))
+#define ioremap_np(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRnE))
 
 /*
  * io{read,write}{16,32,64}be() macros

arch/arm64/include/asm/sysreg.h

@@ -1032,6 +1032,66 @@
 #define TRFCR_ELx_ExTRE			BIT(1)
 #define TRFCR_ELx_E0TRE			BIT(0)
 
+
+/* GIC Hypervisor interface registers */
+/* ICH_MISR_EL2 bit definitions */
+#define ICH_MISR_EOI		(1 << 0)
+#define ICH_MISR_U		(1 << 1)
+
+/* ICH_LR*_EL2 bit definitions */
+#define ICH_LR_VIRTUAL_ID_MASK	((1ULL << 32) - 1)
+
+#define ICH_LR_EOI		(1ULL << 41)
+#define ICH_LR_GROUP		(1ULL << 60)
+#define ICH_LR_HW		(1ULL << 61)
+#define ICH_LR_STATE		(3ULL << 62)
+#define ICH_LR_PENDING_BIT	(1ULL << 62)
+#define ICH_LR_ACTIVE_BIT	(1ULL << 63)
+#define ICH_LR_PHYS_ID_SHIFT	32
+#define ICH_LR_PHYS_ID_MASK	(0x3ffULL << ICH_LR_PHYS_ID_SHIFT)
+#define ICH_LR_PRIORITY_SHIFT	48
+#define ICH_LR_PRIORITY_MASK	(0xffULL << ICH_LR_PRIORITY_SHIFT)
+
+/* ICH_HCR_EL2 bit definitions */
+#define ICH_HCR_EN		(1 << 0)
+#define ICH_HCR_UIE		(1 << 1)
+#define ICH_HCR_NPIE		(1 << 3)
+#define ICH_HCR_TC		(1 << 10)
+#define ICH_HCR_TALL0		(1 << 11)
+#define ICH_HCR_TALL1		(1 << 12)
+#define ICH_HCR_EOIcount_SHIFT	27
+#define ICH_HCR_EOIcount_MASK	(0x1f << ICH_HCR_EOIcount_SHIFT)
+
+/* ICH_VMCR_EL2 bit definitions */
+#define ICH_VMCR_ACK_CTL_SHIFT	2
+#define ICH_VMCR_ACK_CTL_MASK	(1 << ICH_VMCR_ACK_CTL_SHIFT)
+#define ICH_VMCR_FIQ_EN_SHIFT	3
+#define ICH_VMCR_FIQ_EN_MASK	(1 << ICH_VMCR_FIQ_EN_SHIFT)
+#define ICH_VMCR_CBPR_SHIFT	4
+#define ICH_VMCR_CBPR_MASK	(1 << ICH_VMCR_CBPR_SHIFT)
+#define ICH_VMCR_EOIM_SHIFT	9
+#define ICH_VMCR_EOIM_MASK	(1 << ICH_VMCR_EOIM_SHIFT)
+#define ICH_VMCR_BPR1_SHIFT	18
+#define ICH_VMCR_BPR1_MASK	(7 << ICH_VMCR_BPR1_SHIFT)
+#define ICH_VMCR_BPR0_SHIFT	21
+#define ICH_VMCR_BPR0_MASK	(7 << ICH_VMCR_BPR0_SHIFT)
+#define ICH_VMCR_PMR_SHIFT	24
+#define ICH_VMCR_PMR_MASK	(0xffUL << ICH_VMCR_PMR_SHIFT)
+#define ICH_VMCR_ENG0_SHIFT	0
+#define ICH_VMCR_ENG0_MASK	(1 << ICH_VMCR_ENG0_SHIFT)
+#define ICH_VMCR_ENG1_SHIFT	1
+#define ICH_VMCR_ENG1_MASK	(1 << ICH_VMCR_ENG1_SHIFT)
+
+/* ICH_VTR_EL2 bit definitions */
+#define ICH_VTR_PRI_BITS_SHIFT	29
+#define ICH_VTR_PRI_BITS_MASK	(7 << ICH_VTR_PRI_BITS_SHIFT)
+#define ICH_VTR_ID_BITS_SHIFT	23
+#define ICH_VTR_ID_BITS_MASK	(7 << ICH_VTR_ID_BITS_SHIFT)
+#define ICH_VTR_SEIS_SHIFT	22
+#define ICH_VTR_SEIS_MASK	(1 << ICH_VTR_SEIS_SHIFT)
+#define ICH_VTR_A3V_SHIFT	21
+#define ICH_VTR_A3V_MASK	(1 << ICH_VTR_A3V_SHIFT)
+
 #ifdef __ASSEMBLY__
 
 	.irp	num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30

arch/sparc/include/asm/io_64.h

@@ -409,6 +409,10 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
 #define ioremap_uc(X,Y)			ioremap((X),(Y))
 #define ioremap_wc(X,Y)			ioremap((X),(Y))
 #define ioremap_wt(X,Y)			ioremap((X),(Y))
+static inline void __iomem *ioremap_np(unsigned long offset, unsigned long size)
+{
+	return NULL;
+}
 
 static inline void iounmap(volatile void __iomem *addr)
 {

drivers/clocksource/arm_arch_timer.c

@@ -63,6 +63,14 @@ struct arch_timer {
 static u32 arch_timer_rate;
 static int arch_timer_ppi[ARCH_TIMER_MAX_TIMER_PPI];
 
+static const char *arch_timer_ppi_names[ARCH_TIMER_MAX_TIMER_PPI] = {
+	[ARCH_TIMER_PHYS_SECURE_PPI]	= "sec-phys",
+	[ARCH_TIMER_PHYS_NONSECURE_PPI]	= "phys",
+	[ARCH_TIMER_VIRT_PPI]		= "virt",
+	[ARCH_TIMER_HYP_PPI]		= "hyp-phys",
+	[ARCH_TIMER_HYP_VIRT_PPI]	= "hyp-virt",
+};
+
 static struct clock_event_device __percpu *arch_timer_evt;
 
 static enum arch_timer_ppi_nr arch_timer_uses_ppi = ARCH_TIMER_VIRT_PPI;
@@ -1280,8 +1288,9 @@ static void __init arch_timer_populate_kvm_info(void)
 
 static int __init arch_timer_of_init(struct device_node *np)
 {
-	int i, ret;
+	int i, irq, ret;
 	u32 rate;
+	bool has_names;
 
 	if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
 		pr_warn("multiple nodes in dt, skipping\n");
@@ -1289,8 +1298,17 @@ static int __init arch_timer_of_init(struct device_node *np)
 	}
 
 	arch_timers_present |= ARCH_TIMER_TYPE_CP15;
-	for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++)
-		arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
+
+	has_names = of_property_read_bool(np, "interrupt-names");
+
+	for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++) {
+		if (has_names)
+			irq = of_irq_get_byname(np, arch_timer_ppi_names[i]);
+		else
+			irq = of_irq_get(np, i);
+		if (irq > 0)
+			arch_timer_ppi[i] = irq;
+	}
 
 	arch_timer_populate_kvm_info();
 

drivers/irqchip/Kconfig

@@ -577,4 +577,12 @@ config MST_IRQ
 	help
 	  Support MStar Interrupt Controller.
 
+config APPLE_AIC
+	bool "Apple Interrupt Controller (AIC)"
+	depends on ARM64
+	default ARCH_APPLE
+	help
+	  Support for the Apple Interrupt Controller found on Apple Silicon SoCs,
+	  such as the M1.
+
 endmenu

drivers/irqchip/Makefile

@@ -113,3 +113,4 @@ obj-$(CONFIG_LOONGSON_PCH_MSI)		+= irq-loongson-pch-msi.o
 obj-$(CONFIG_MST_IRQ)			+= irq-mst-intc.o
 obj-$(CONFIG_SL28CPLD_INTC)		+= irq-sl28cpld.o
 obj-$(CONFIG_MACH_REALTEK_RTL)		+= irq-realtek-rtl.o
+obj-$(CONFIG_APPLE_AIC)			+= irq-apple-aic.o

drivers/of/address.c

@@ -26,6 +26,7 @@ static struct of_bus *of_match_bus(struct device_node *np);
 static int __of_address_to_resource(struct device_node *dev,
 		const __be32 *addrp, u64 size, unsigned int flags,
 		const char *name, struct resource *r);
+static bool of_mmio_is_nonposted(struct device_node *np);
 
 /* Debug utility */
 #ifdef DEBUG
@@ -847,6 +848,9 @@ static int __of_address_to_resource(struct device_node *dev,
 		return -EINVAL;
 	memset(r, 0, sizeof(struct resource));
 
+	if (of_mmio_is_nonposted(dev))
+		flags |= IORESOURCE_MEM_NONPOSTED;
+
 	r->start = taddr;
 	r->end = taddr + size - 1;
 	r->flags = flags;
@@ -896,7 +900,10 @@ void __iomem *of_iomap(struct device_node *np, int index)
 	if (of_address_to_resource(np, index, &res))
 		return NULL;
 
-	return ioremap(res.start, resource_size(&res));
+	if (res.flags & IORESOURCE_MEM_NONPOSTED)
+		return ioremap_np(res.start, resource_size(&res));
+	else
+		return ioremap(res.start, resource_size(&res));
 }
 EXPORT_SYMBOL(of_iomap);
 
@@ -928,7 +935,11 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index,
 	if (!request_mem_region(res.start, resource_size(&res), name))
 		return IOMEM_ERR_PTR(-EBUSY);
 
-	mem = ioremap(res.start, resource_size(&res));
+	if (res.flags & IORESOURCE_MEM_NONPOSTED)
+		mem = ioremap_np(res.start, resource_size(&res));
+	else
+		mem = ioremap(res.start, resource_size(&res));
+
 	if (!mem) {
 		release_mem_region(res.start, resource_size(&res));
 		return IOMEM_ERR_PTR(-ENOMEM);
@@ -1094,3 +1105,31 @@ bool of_dma_is_coherent(struct device_node *np)
 	return false;
 }
 EXPORT_SYMBOL_GPL(of_dma_is_coherent);
+
+/**
+ * of_mmio_is_nonposted - Check if device uses non-posted MMIO
+ * @np:	device node
+ *
+ * Returns true if the "nonposted-mmio" property was found for
+ * the device's bus.
+ *
+ * This is currently only enabled on builds that support Apple ARM devices, as
+ * an optimization.
+ */
+static bool of_mmio_is_nonposted(struct device_node *np)
+{
+	struct device_node *parent;
+	bool nonposted;
+
+	if (!IS_ENABLED(CONFIG_ARCH_APPLE))
+		return false;
+
+	parent = of_get_parent(np);
+	if (!parent)
+		return false;
+
+	nonposted = of_property_read_bool(parent, "nonposted-mmio");
+
+	of_node_put(parent);
+	return nonposted;
+}

include/asm-generic/io.h

@@ -942,7 +942,9 @@ static inline void *phys_to_virt(unsigned long address)
  *
  * ioremap_wc() and ioremap_wt() can provide more relaxed caching attributes
  * for specific drivers if the architecture choses to implement them.  If they
- * are not implemented we fall back to plain ioremap.
+ * are not implemented we fall back to plain ioremap. Conversely, ioremap_np()
+ * can provide stricter non-posted write semantics if the architecture
+ * implements them.
  */
 #ifndef CONFIG_MMU
 #ifndef ioremap
@@ -993,6 +995,24 @@ static inline void __iomem *ioremap_uc(phys_addr_t offset, size_t size)
 {
 	return NULL;
 }
+
+/*
+ * ioremap_np needs an explicit architecture implementation, as it
+ * requests stronger semantics than regular ioremap(). Portable drivers
+ * should instead use one of the higher-level abstractions, like
+ * devm_ioremap_resource(), to choose the correct variant for any given
+ * device and bus. Portable drivers with a good reason to want non-posted
+ * write semantics should always provide an ioremap() fallback in case
+ * ioremap_np() is not available.
+ */
+#ifndef ioremap_np
+#define ioremap_np ioremap_np
+static inline void __iomem *ioremap_np(phys_addr_t offset, size_t size)
+{
+	return NULL;
+}
+#endif
+
 #endif
 
 #ifdef CONFIG_HAS_IOPORT_MAP

include/asm-generic/iomap.h

@@ -101,6 +101,15 @@ extern void ioport_unmap(void __iomem *);
 #define ioremap_wt ioremap
 #endif
 
+#ifndef ARCH_HAS_IOREMAP_NP
+/* See the comment in asm-generic/io.h about ioremap_np(). */
+#define ioremap_np ioremap_np
+static inline void __iomem *ioremap_np(phys_addr_t offset, size_t size)
+{
+	return NULL;
+}
+#endif
+
 #ifdef CONFIG_PCI
 /* Destroy a virtual mapping cookie for a PCI BAR (memory or IO) */
 struct pci_dev;

include/clocksource/arm_arch_timer.h

@@ -32,6 +32,7 @@ enum arch_timer_ppi_nr {
 	ARCH_TIMER_PHYS_NONSECURE_PPI,
 	ARCH_TIMER_VIRT_PPI,
 	ARCH_TIMER_HYP_PPI,
+	ARCH_TIMER_HYP_VIRT_PPI,
 	ARCH_TIMER_MAX_TIMER_PPI
 };
 

include/dt-bindings/interrupt-controller/apple-aic.h

+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_APPLE_AIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_APPLE_AIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define AIC_IRQ	0
+#define AIC_FIQ	1
+
+#define AIC_TMR_HV_PHYS		0
+#define AIC_TMR_HV_VIRT		1
+#define AIC_TMR_GUEST_PHYS	2
+#define AIC_TMR_GUEST_VIRT	3
+
+#endif

include/linux/cpuhotplug.h

@@ -100,6 +100,7 @@ enum cpuhp_state {
 	CPUHP_AP_CPU_PM_STARTING,
 	CPUHP_AP_IRQ_GIC_STARTING,
 	CPUHP_AP_IRQ_HIP04_STARTING,
+	CPUHP_AP_IRQ_APPLE_AIC_STARTING,
 	CPUHP_AP_IRQ_ARMADA_XP_STARTING,
 	CPUHP_AP_IRQ_BCM2836_STARTING,
 	CPUHP_AP_IRQ_MIPS_GIC_STARTING,

include/linux/io.h

@@ -68,6 +68,8 @@ void __iomem *devm_ioremap_uc(struct device *dev, resource_size_t offset,
 				   resource_size_t size);
 void __iomem *devm_ioremap_wc(struct device *dev, resource_size_t offset,
 				   resource_size_t size);
+void __iomem *devm_ioremap_np(struct device *dev, resource_size_t offset,
+				   resource_size_t size);
 void devm_iounmap(struct device *dev, void __iomem *addr);
 int check_signature(const volatile void __iomem *io_addr,
 			const unsigned char *signature, int length);
@@ -80,20 +82,20 @@ void devm_memunmap(struct device *dev, void *addr);
 #ifdef CONFIG_PCI
 /*
  * The PCI specifications (Rev 3.0, 3.2.5 "Transaction Ordering and
- * Posting") mandate non-posted configuration transactions. There is
- * no ioremap API in the kernel that can guarantee non-posted write
- * semantics across arches so provide a default implementation for
- * mapping PCI config space that defaults to ioremap(); arches
- * should override it if they have memory mapping implementations that
- * guarantee non-posted writes semantics to make the memory mapping
- * compliant with the PCI specification.
+ * Posting") mandate non-posted configuration transactions. This default
+ * implementation attempts to use the ioremap_np() API to provide this
+ * on arches that support it, and falls back to ioremap() on those that
+ * don't. Overriding this function is deprecated; arches that properly
+ * support non-posted accesses should implement ioremap_np() instead, which
+ * this default implementation can then use to return mappings compliant with
+ * the PCI specification.
  */
 #ifndef pci_remap_cfgspace
 #define pci_remap_cfgspace pci_remap_cfgspace
 static inline void __iomem *pci_remap_cfgspace(phys_addr_t offset,
 					       size_t size)
 {
-	return ioremap(offset, size);
+	return ioremap_np(offset, size) ?: ioremap(offset, size);
 }
 #endif
 #endif

include/linux/ioport.h

@@ -108,6 +108,7 @@ struct resource {
 #define IORESOURCE_MEM_32BIT		(3<<3)
 #define IORESOURCE_MEM_SHADOWABLE	(1<<5)	/* dup: IORESOURCE_SHADOWABLE */
 #define IORESOURCE_MEM_EXPANSIONROM	(1<<6)
+#define IORESOURCE_MEM_NONPOSTED	(1<<7)
 
 /* PnP I/O specific bits (IORESOURCE_BITS) */
 #define IORESOURCE_IO_16BIT_ADDR	(1<<0)

include/linux/irqchip/arm-gic-v3.h

@@ -575,67 +575,11 @@
 #define ICC_SRE_EL1_DFB			(1U << 1)
 #define ICC_SRE_EL1_SRE			(1U << 0)
 
-/*
- * Hypervisor interface registers (SRE only)
- */
-#define ICH_LR_VIRTUAL_ID_MASK		((1ULL << 32) - 1)
-
-#define ICH_LR_EOI			(1ULL << 41)
-#define ICH_LR_GROUP			(1ULL << 60)
-#define ICH_LR_HW			(1ULL << 61)
-#define ICH_LR_STATE			(3ULL << 62)
-#define ICH_LR_PENDING_BIT		(1ULL << 62)
-#define ICH_LR_ACTIVE_BIT		(1ULL << 63)
-#define ICH_LR_PHYS_ID_SHIFT		32
-#define ICH_LR_PHYS_ID_MASK		(0x3ffULL << ICH_LR_PHYS_ID_SHIFT)
-#define ICH_LR_PRIORITY_SHIFT		48
-#define ICH_LR_PRIORITY_MASK		(0xffULL << ICH_LR_PRIORITY_SHIFT)
-
 /* These are for GICv2 emulation only */
 #define GICH_LR_VIRTUALID		(0x3ffUL << 0)
 #define GICH_LR_PHYSID_CPUID_SHIFT	(10)
 #define GICH_LR_PHYSID_CPUID		(7UL << GICH_LR_PHYSID_CPUID_SHIFT)
 
-#define ICH_MISR_EOI			(1 << 0)
-#define ICH_MISR_U			(1 << 1)
-
-#define ICH_HCR_EN			(1 << 0)
-#define ICH_HCR_UIE			(1 << 1)
-#define ICH_HCR_NPIE			(1 << 3)
-#define ICH_HCR_TC			(1 << 10)
-#define ICH_HCR_TALL0			(1 << 11)
-#define ICH_HCR_TALL1			(1 << 12)
-#define ICH_HCR_EOIcount_SHIFT		27
-#define ICH_HCR_EOIcount_MASK		(0x1f << ICH_HCR_EOIcount_SHIFT)
-
-#define ICH_VMCR_ACK_CTL_SHIFT		2
-#define ICH_VMCR_ACK_CTL_MASK		(1 << ICH_VMCR_ACK_CTL_SHIFT)
-#define ICH_VMCR_FIQ_EN_SHIFT		3
-#define ICH_VMCR_FIQ_EN_MASK		(1 << ICH_VMCR_FIQ_EN_SHIFT)
-#define ICH_VMCR_CBPR_SHIFT		4
-#define ICH_VMCR_CBPR_MASK		(1 << ICH_VMCR_CBPR_SHIFT)
-#define ICH_VMCR_EOIM_SHIFT		9
-#define ICH_VMCR_EOIM_MASK		(1 << ICH_VMCR_EOIM_SHIFT)
-#define ICH_VMCR_BPR1_SHIFT		18
-#define ICH_VMCR_BPR1_MASK		(7 << ICH_VMCR_BPR1_SHIFT)
-#define ICH_VMCR_BPR0_SHIFT		21
-#define ICH_VMCR_BPR0_MASK		(7 << ICH_VMCR_BPR0_SHIFT)
-#define ICH_VMCR_PMR_SHIFT		24
-#define ICH_VMCR_PMR_MASK		(0xffUL << ICH_VMCR_PMR_SHIFT)
-#define ICH_VMCR_ENG0_SHIFT		0
-#define ICH_VMCR_ENG0_MASK		(1 << ICH_VMCR_ENG0_SHIFT)
-#define ICH_VMCR_ENG1_SHIFT		1
-#define ICH_VMCR_ENG1_MASK		(1 << ICH_VMCR_ENG1_SHIFT)
-
-#define ICH_VTR_PRI_BITS_SHIFT		29
-#define ICH_VTR_PRI_BITS_MASK		(7 << ICH_VTR_PRI_BITS_SHIFT)
-#define ICH_VTR_ID_BITS_SHIFT		23
-#define ICH_VTR_ID_BITS_MASK		(7 << ICH_VTR_ID_BITS_SHIFT)
-#define ICH_VTR_SEIS_SHIFT		22
-#define ICH_VTR_SEIS_MASK		(1 << ICH_VTR_SEIS_SHIFT)
-#define ICH_VTR_A3V_SHIFT		21
-#define ICH_VTR_A3V_MASK		(1 << ICH_VTR_A3V_SHIFT)
-
 #define ICC_IAR1_EL1_SPURIOUS		0x3ff
 
 #define ICC_SRE_EL2_SRE			(1 << 0)

lib/devres.c

@@ -10,6 +10,7 @@ enum devm_ioremap_type {
 	DEVM_IOREMAP = 0,
 	DEVM_IOREMAP_UC,
 	DEVM_IOREMAP_WC,
+	DEVM_IOREMAP_NP,
 };
 
 void devm_ioremap_release(struct device *dev, void *res)
@@ -42,6 +43,9 @@ static void __iomem *__devm_ioremap(struct device *dev, resource_size_t offset,
 	case DEVM_IOREMAP_WC:
 		addr = ioremap_wc(offset, size);
 		break;
+	case DEVM_IOREMAP_NP:
+		addr = ioremap_np(offset, size);
+		break;
 	}
 
 	if (addr) {
@@ -98,6 +102,21 @@ void __iomem *devm_ioremap_wc(struct device *dev, resource_size_t offset,
 }
 EXPORT_SYMBOL(devm_ioremap_wc);
 
+/**
+ * devm_ioremap_np - Managed ioremap_np()
+ * @dev: Generic device to remap IO address for
+ * @offset: Resource address to map
+ * @size: Size of map
+ *
+ * Managed ioremap_np().  Map is automatically unmapped on driver detach.
+ */
+void __iomem *devm_ioremap_np(struct device *dev, resource_size_t offset,
+			      resource_size_t size)
+{
+	return __devm_ioremap(dev, offset, size, DEVM_IOREMAP_NP);
+}
+EXPORT_SYMBOL(devm_ioremap_np);
+
 /**
  * devm_iounmap - Managed iounmap()
  * @dev: Generic device to unmap for
@@ -128,6 +147,9 @@ __devm_ioremap_resource(struct device *dev, const struct resource *res,
 		return IOMEM_ERR_PTR(-EINVAL);
 	}
 
+	if (type == DEVM_IOREMAP && res->flags & IORESOURCE_MEM_NONPOSTED)
+		type = DEVM_IOREMAP_NP;
+
 	size = resource_size(res);
 
 	if (res->name)