Commit 1c0bcf89 authored by Ivo van Doorn's avatar Ivo van Doorn Committed by John W. Linville

rt2x00: Add autowake support for USB hardware

The USB drivers don't support automatically waking up when in powersaving mode,
add a work object which will wakeup the device in time to receive the next beacon.
Based on that beacon, we either go back into powersaving mode, or we remain awake
to receive the buffered frames for our station.

Some part of the code, especially rt2x00lib_find_ie and rt2x00lib_rxdone_check_ps
are inspired on the code from carl9170.
Signed-off-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent fdbc7b0a
...@@ -1797,6 +1797,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) ...@@ -1797,6 +1797,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(REQUIRE_COPY_IV, &rt2x00dev->cap_flags); __set_bit(REQUIRE_COPY_IV, &rt2x00dev->cap_flags);
} }
__set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags); __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags);
__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
/* /*
* Set the rssi offset. * Set the rssi offset.
......
...@@ -634,6 +634,7 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) ...@@ -634,6 +634,7 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
__set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags); __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
__set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags); __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
setup_timer(&rt2x00dev->txstatus_timer, setup_timer(&rt2x00dev->txstatus_timer,
rt2800usb_tx_sta_fifo_timeout, rt2800usb_tx_sta_fifo_timeout,
......
...@@ -662,6 +662,7 @@ enum rt2x00_state_flags { ...@@ -662,6 +662,7 @@ enum rt2x00_state_flags {
* Driver configuration * Driver configuration
*/ */
CONFIG_CHANNEL_HT40, CONFIG_CHANNEL_HT40,
CONFIG_POWERSAVING,
}; };
/* /*
...@@ -681,6 +682,7 @@ enum rt2x00_capability_flags { ...@@ -681,6 +682,7 @@ enum rt2x00_capability_flags {
REQUIRE_TASKLET_CONTEXT, REQUIRE_TASKLET_CONTEXT,
REQUIRE_SW_SEQNO, REQUIRE_SW_SEQNO,
REQUIRE_HT_TX_DESC, REQUIRE_HT_TX_DESC,
REQUIRE_PS_AUTOWAKE,
/* /*
* Capabilities * Capabilities
...@@ -874,11 +876,21 @@ struct rt2x00_dev { ...@@ -874,11 +876,21 @@ struct rt2x00_dev {
*/ */
u8 calibration[2]; u8 calibration[2];
/*
* Association id.
*/
u16 aid;
/* /*
* Beacon interval. * Beacon interval.
*/ */
u16 beacon_int; u16 beacon_int;
/**
* Timestamp of last received beacon
*/
unsigned long last_beacon;
/* /*
* Low level statistics which will have * Low level statistics which will have
* to be kept up to date while device is running. * to be kept up to date while device is running.
...@@ -906,6 +918,11 @@ struct rt2x00_dev { ...@@ -906,6 +918,11 @@ struct rt2x00_dev {
struct work_struct rxdone_work; struct work_struct rxdone_work;
struct work_struct txdone_work; struct work_struct txdone_work;
/*
* Powersaving work
*/
struct delayed_work autowakeup_work;
/* /*
* Data queue arrays for RX, TX, Beacon and ATIM. * Data queue arrays for RX, TX, Beacon and ATIM.
*/ */
......
...@@ -100,6 +100,10 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, ...@@ -100,6 +100,10 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
erp.basic_rates = bss_conf->basic_rates; erp.basic_rates = bss_conf->basic_rates;
erp.beacon_int = bss_conf->beacon_int; erp.beacon_int = bss_conf->beacon_int;
/* Update the AID, this is needed for dynamic PS support */
rt2x00dev->aid = bss_conf->assoc ? bss_conf->aid : 0;
rt2x00dev->last_beacon = bss_conf->timestamp;
/* Update global beacon interval time, this is needed for PS support */ /* Update global beacon interval time, this is needed for PS support */
rt2x00dev->beacon_int = bss_conf->beacon_int; rt2x00dev->beacon_int = bss_conf->beacon_int;
...@@ -204,6 +208,9 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, ...@@ -204,6 +208,9 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
{ {
struct rt2x00lib_conf libconf; struct rt2x00lib_conf libconf;
u16 hw_value; u16 hw_value;
u16 autowake_timeout;
u16 beacon_int;
u16 beacon_diff;
memset(&libconf, 0, sizeof(libconf)); memset(&libconf, 0, sizeof(libconf));
...@@ -227,6 +234,10 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, ...@@ -227,6 +234,10 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
sizeof(libconf.channel)); sizeof(libconf.channel));
} }
if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
(ieee80211_flags & IEEE80211_CONF_CHANGE_PS))
cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
/* /*
* Start configuration. * Start configuration.
*/ */
...@@ -239,6 +250,26 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, ...@@ -239,6 +250,26 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL)
rt2x00link_reset_tuner(rt2x00dev, false); rt2x00link_reset_tuner(rt2x00dev, false);
if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
(ieee80211_flags & IEEE80211_CONF_CHANGE_PS) &&
(conf->flags & IEEE80211_CONF_PS)) {
beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon;
beacon_int = msecs_to_jiffies(rt2x00dev->beacon_int);
if (beacon_diff > beacon_int)
beacon_diff = 0;
autowake_timeout = (conf->max_sleep_period * beacon_int) - beacon_diff;
queue_delayed_work(rt2x00dev->workqueue,
&rt2x00dev->autowakeup_work,
autowake_timeout - 15);
}
if (conf->flags & IEEE80211_CONF_PS)
set_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
else
clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
rt2x00dev->curr_band = conf->channel->band; rt2x00dev->curr_band = conf->channel->band;
rt2x00dev->curr_freq = conf->channel->center_freq; rt2x00dev->curr_freq = conf->channel->center_freq;
rt2x00dev->tx_power = conf->power_level; rt2x00dev->tx_power = conf->power_level;
......
...@@ -141,6 +141,16 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work) ...@@ -141,6 +141,16 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work)
rt2x00dev); rt2x00dev);
} }
static void rt2x00lib_autowakeup(struct work_struct *work)
{
struct rt2x00_dev *rt2x00dev =
container_of(work, struct rt2x00_dev, autowakeup_work.work);
if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
ERROR(rt2x00dev, "Device failed to wakeup.\n");
clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
}
/* /*
* Interrupt context handlers. * Interrupt context handlers.
*/ */
...@@ -416,6 +426,77 @@ void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status) ...@@ -416,6 +426,77 @@ void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status)
} }
EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo); EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie)
{
struct ieee80211_mgmt *mgmt = (void *)data;
u8 *pos, *end;
pos = (u8 *)mgmt->u.beacon.variable;
end = data + len;
while (pos < end) {
if (pos + 2 + pos[1] > end)
return NULL;
if (pos[0] == ie)
return pos;
pos += 2 + pos[1];
}
return NULL;
}
static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct rxdone_entry_desc *rxdesc)
{
struct ieee80211_hdr *hdr = (void *) skb->data;
struct ieee80211_tim_ie *tim_ie;
u8 *tim;
u8 tim_len;
bool cam;
/* If this is not a beacon, or if mac80211 has no powersaving
* configured, or if the device is already in powersaving mode
* we can exit now. */
if (likely(!ieee80211_is_beacon(hdr->frame_control) ||
!(rt2x00dev->hw->conf.flags & IEEE80211_CONF_PS)))
return;
/* min. beacon length + FCS_LEN */
if (skb->len <= 40 + FCS_LEN)
return;
/* and only beacons from the associated BSSID, please */
if (!(rxdesc->dev_flags & RXDONE_MY_BSS) ||
!rt2x00dev->aid)
return;
rt2x00dev->last_beacon = jiffies;
tim = rt2x00lib_find_ie(skb->data, skb->len - FCS_LEN, WLAN_EID_TIM);
if (!tim)
return;
if (tim[1] < sizeof(*tim_ie))
return;
tim_len = tim[1];
tim_ie = (struct ieee80211_tim_ie *) &tim[2];
/* Check whenever the PHY can be turned off again. */
/* 1. What about buffered unicast traffic for our AID? */
cam = ieee80211_check_tim(tim_ie, tim_len, rt2x00dev->aid);
/* 2. Maybe the AP wants to send multicast/broadcast data? */
cam |= (tim_ie->bitmap_ctrl & 0x01);
if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
IEEE80211_CONF_CHANGE_PS);
}
static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev, static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
struct rxdone_entry_desc *rxdesc) struct rxdone_entry_desc *rxdesc)
{ {
...@@ -530,6 +611,12 @@ void rt2x00lib_rxdone(struct queue_entry *entry) ...@@ -530,6 +611,12 @@ void rt2x00lib_rxdone(struct queue_entry *entry)
rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD) rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD)
rxdesc.flags |= RX_FLAG_HT; rxdesc.flags |= RX_FLAG_HT;
/*
* Check if this is a beacon, and more frames have been
* buffered while we were in powersaving mode.
*/
rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc);
/* /*
* Update extra components * Update extra components
*/ */
...@@ -1017,6 +1104,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) ...@@ -1017,6 +1104,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
} }
INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
/* /*
* Let the driver probe the device to detect the capabilities. * Let the driver probe the device to detect the capabilities.
......
...@@ -2209,6 +2209,7 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) ...@@ -2209,6 +2209,7 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
if (!modparam_nohwcrypt) if (!modparam_nohwcrypt)
__set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
__set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
/* /*
* Set the rssi offset. * Set the rssi offset.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment