Commit 1c10e938 authored by Randy Dunlap's avatar Randy Dunlap Committed by Bartlomiej Zolnierkiewicz

ide: update references to Documentation/ide/ide.txt (v2)

Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.
Signed-off-by: default avatarRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 331a5ad2
...@@ -183,8 +183,6 @@ i386/ ...@@ -183,8 +183,6 @@ i386/
- directory with info about Linux on Intel 32 bit architecture. - directory with info about Linux on Intel 32 bit architecture.
ia64/ ia64/
- directory with info about Linux on Intel 64 bit architecture. - directory with info about Linux on Intel 64 bit architecture.
ide.txt
- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
infiniband/ infiniband/
- directory with documents concerning Linux InfiniBand support. - directory with documents concerning Linux InfiniBand support.
initrd.txt initrd.txt
......
...@@ -45,7 +45,7 @@ This driver provides the following features: ...@@ -45,7 +45,7 @@ This driver provides the following features:
--------------- ---------------
0. The ide-cd relies on the ide disk driver. See 0. The ide-cd relies on the ide disk driver. See
Documentation/ide.txt for up-to-date information on the ide Documentation/ide/ide.txt for up-to-date information on the ide
driver. driver.
1. Make sure that the ide and ide-cd drivers are compiled into the 1. Make sure that the ide and ide-cd drivers are compiled into the
...@@ -64,7 +64,7 @@ This driver provides the following features: ...@@ -64,7 +64,7 @@ This driver provides the following features:
Depending on what type of IDE interface you have, you may need to Depending on what type of IDE interface you have, you may need to
specify additional configuration options. See specify additional configuration options. See
Documentation/ide.txt. Documentation/ide/ide.txt.
2. You should also ensure that the iso9660 filesystem is either 2. You should also ensure that the iso9660 filesystem is either
compiled into the kernel or available as a loadable module. You compiled into the kernel or available as a loadable module. You
...@@ -84,7 +84,7 @@ This driver provides the following features: ...@@ -84,7 +84,7 @@ This driver provides the following features:
on the primary IDE interface are called `hda' and `hdb', on the primary IDE interface are called `hda' and `hdb',
respectively. The drives on the secondary interface are called respectively. The drives on the secondary interface are called
`hdc' and `hdd'. (Interfaces at other locations get other letters `hdc' and `hdd'. (Interfaces at other locations get other letters
in the third position; see Documentation/ide.txt.) in the third position; see Documentation/ide/ide.txt.)
If you want your CDROM drive to be found automatically by the If you want your CDROM drive to be found automatically by the
driver, you should make sure your IDE interface uses either the driver, you should make sure your IDE interface uses either the
...@@ -93,7 +93,7 @@ This driver provides the following features: ...@@ -93,7 +93,7 @@ This driver provides the following features:
be jumpered as `master'. (If for some reason you cannot configure be jumpered as `master'. (If for some reason you cannot configure
your system in this manner, you can probably still use the driver. your system in this manner, you can probably still use the driver.
You may have to pass extra configuration information to the kernel You may have to pass extra configuration information to the kernel
when you boot, however. See Documentation/ide.txt for more when you boot, however. See Documentation/ide/ide.txt for more
information.) information.)
4. Boot the system. If the drive is recognized, you should see a 4. Boot the system. If the drive is recognized, you should see a
...@@ -201,7 +201,7 @@ TEST ...@@ -201,7 +201,7 @@ TEST
This section discusses some common problems encountered when trying to This section discusses some common problems encountered when trying to
use the driver, and some possible solutions. Note that if you are use the driver, and some possible solutions. Note that if you are
experiencing problems, you should probably also review experiencing problems, you should probably also review
Documentation/ide.txt for current information about the underlying Documentation/ide/ide.txt for current information about the underlying
IDE support code. Some of these items apply only to earlier versions IDE support code. Some of these items apply only to earlier versions
of the driver, but are mentioned here for completeness. of the driver, but are mentioned here for completeness.
...@@ -211,7 +211,7 @@ from the driver. ...@@ -211,7 +211,7 @@ from the driver.
a. Drive is not detected during booting. a. Drive is not detected during booting.
- Review the configuration instructions above and in - Review the configuration instructions above and in
Documentation/ide.txt, and check how your hardware is Documentation/ide/ide.txt, and check how your hardware is
configured. configured.
- If your drive is the only device on an IDE interface, it should - If your drive is the only device on an IDE interface, it should
...@@ -219,7 +219,7 @@ a. Drive is not detected during booting. ...@@ -219,7 +219,7 @@ a. Drive is not detected during booting.
- If your IDE interface is not at the standard addresses of 0x170 - If your IDE interface is not at the standard addresses of 0x170
or 0x1f0, you'll need to explicitly inform the driver using a or 0x1f0, you'll need to explicitly inform the driver using a
lilo option. See Documentation/ide.txt. (This feature was lilo option. See Documentation/ide/ide.txt. (This feature was
added around kernel version 1.3.30.) added around kernel version 1.3.30.)
- If the autoprobing is not finding your drive, you can tell the - If the autoprobing is not finding your drive, you can tell the
...@@ -245,7 +245,7 @@ a. Drive is not detected during booting. ...@@ -245,7 +245,7 @@ a. Drive is not detected during booting.
Support for some interfaces needing extra initialization is Support for some interfaces needing extra initialization is
provided in later 1.3.x kernels. You may need to turn on provided in later 1.3.x kernels. You may need to turn on
additional kernel configuration options to get them to work; additional kernel configuration options to get them to work;
see Documentation/ide.txt. see Documentation/ide/ide.txt.
Even if support is not available for your interface, you may be Even if support is not available for your interface, you may be
able to get it to work with the following procedure. First boot able to get it to work with the following procedure. First boot
...@@ -299,7 +299,7 @@ c. System hangups. ...@@ -299,7 +299,7 @@ c. System hangups.
be worked around by specifying the `serialize' option when be worked around by specifying the `serialize' option when
booting. Recent kernels should be able to detect the need for booting. Recent kernels should be able to detect the need for
this automatically in most cases, but the detection is not this automatically in most cases, but the detection is not
foolproof. See Documentation/ide.txt for more information foolproof. See Documentation/ide/ide.txt for more information
about the `serialize' option and the CMD640B. about the `serialize' option and the CMD640B.
- Note that many MS-DOS CDROM drivers will work with such buggy - Note that many MS-DOS CDROM drivers will work with such buggy
......
00-INDEX
- this file
ChangeLog.ide-cd.1994-2004
- ide-cd changelog
ChangeLog.ide-floppy.1996-2002
- ide-floppy changelog
ChangeLog.ide-tape.1995-2002
- ide-tape changelog
ide-tape.txt
- info on the IDE ATAPI streaming tape driver
ide.txt
- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
...@@ -712,7 +712,7 @@ and is between 256 and 4096 characters. It is defined in the file ...@@ -712,7 +712,7 @@ and is between 256 and 4096 characters. It is defined in the file
Format: <cyl>,<head>,<sect> Format: <cyl>,<head>,<sect>
hd?= [HW] (E)IDE subsystem hd?= [HW] (E)IDE subsystem
hd?lun= See Documentation/ide.txt. hd?lun= See Documentation/ide/ide.txt.
highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
size of <nn>. This works even on boxes that have no size of <nn>. This works even on boxes that have no
...@@ -766,14 +766,14 @@ and is between 256 and 4096 characters. It is defined in the file ...@@ -766,14 +766,14 @@ and is between 256 and 4096 characters. It is defined in the file
ide= [HW] (E)IDE subsystem ide= [HW] (E)IDE subsystem
Format: ide=nodma or ide=doubler or ide=reverse Format: ide=nodma or ide=doubler or ide=reverse
See Documentation/ide.txt. See Documentation/ide/ide.txt.
ide?= [HW] (E)IDE subsystem ide?= [HW] (E)IDE subsystem
Format: ide?=noprobe or chipset specific parameters. Format: ide?=noprobe or chipset specific parameters.
See Documentation/ide.txt. See Documentation/ide/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
See Documentation/ide.txt. See Documentation/ide/ide.txt.
idle= [X86] idle= [X86]
Format: idle=poll or idle=mwait Format: idle=poll or idle=mwait
......
...@@ -50,7 +50,7 @@ menuconfig IDE ...@@ -50,7 +50,7 @@ menuconfig IDE
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called ide. module will be called ide.
For further information, please read <file:Documentation/ide.txt>. For further information, please read <file:Documentation/ide/ide.txt>.
If unsure, say Y. If unsure, say Y.
...@@ -77,7 +77,7 @@ config BLK_DEV_IDE ...@@ -77,7 +77,7 @@ config BLK_DEV_IDE
Useful information about large (>540 MB) IDE disks, multiple Useful information about large (>540 MB) IDE disks, multiple
interfaces, what to do if ATA/IDE devices are not automatically interfaces, what to do if ATA/IDE devices are not automatically
detected, sound card ATA/IDE ports, module support, and other detected, sound card ATA/IDE ports, module support, and other
topics, is contained in <file:Documentation/ide.txt>. For detailed topics, is contained in <file:Documentation/ide/ide.txt>. For detailed
information about hard drives, consult the Disk-HOWTO and the information about hard drives, consult the Disk-HOWTO and the
Multi-Disk-HOWTO, available from Multi-Disk-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. <http://www.tldp.org/docs.html#howto>.
...@@ -87,7 +87,7 @@ config BLK_DEV_IDE ...@@ -87,7 +87,7 @@ config BLK_DEV_IDE
<ftp://ibiblio.org/pub/Linux/system/hardware/>. <ftp://ibiblio.org/pub/Linux/system/hardware/>.
To compile this driver as a module, choose M here and read To compile this driver as a module, choose M here and read
<file:Documentation/ide.txt>. The module will be called ide-mod. <file:Documentation/ide/ide.txt>. The module will be called ide-mod.
Do not compile this driver as a module if your root file system (the Do not compile this driver as a module if your root file system (the
one containing the directory /) is located on an IDE device. one containing the directory /) is located on an IDE device.
...@@ -98,7 +98,7 @@ config BLK_DEV_IDE ...@@ -98,7 +98,7 @@ config BLK_DEV_IDE
if BLK_DEV_IDE if BLK_DEV_IDE
comment "Please see Documentation/ide.txt for help/info on IDE drives" comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
config BLK_DEV_IDE_SATA config BLK_DEV_IDE_SATA
bool "Support for SATA (deprecated; conflicts with libata SATA driver)" bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
...@@ -235,8 +235,8 @@ config BLK_DEV_IDETAPE ...@@ -235,8 +235,8 @@ config BLK_DEV_IDETAPE
along with other IDE devices, as "hdb" or "hdc", or something along with other IDE devices, as "hdb" or "hdc", or something
similar, and will be mapped to a character device such as "ht0" similar, and will be mapped to a character device such as "ht0"
(check the boot messages with dmesg). Be sure to consult the (check the boot messages with dmesg). Be sure to consult the
<file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt>
for usage information. files for usage information.
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called ide-tape. module will be called ide-tape.
...@@ -358,7 +358,7 @@ config BLK_DEV_CMD640 ...@@ -358,7 +358,7 @@ config BLK_DEV_CMD640
The CMD640 chip is also used on add-in cards by Acculogic, and on The CMD640 chip is also used on add-in cards by Acculogic, and on
the "CSA-6400E PCI to IDE controller" that some people have. For the "CSA-6400E PCI to IDE controller" that some people have. For
details, read <file:Documentation/ide.txt>. details, read <file:Documentation/ide/ide.txt>.
config BLK_DEV_CMD640_ENHANCED config BLK_DEV_CMD640_ENHANCED
bool "CMD640 enhanced support" bool "CMD640 enhanced support"
...@@ -366,7 +366,7 @@ config BLK_DEV_CMD640_ENHANCED ...@@ -366,7 +366,7 @@ config BLK_DEV_CMD640_ENHANCED
help help
This option includes support for setting/autotuning PIO modes and This option includes support for setting/autotuning PIO modes and
prefetch on CMD640 IDE interfaces. For details, read prefetch on CMD640 IDE interfaces. For details, read
<file:Documentation/ide.txt>. If you have a CMD640 IDE interface <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
and your BIOS does not already do this for you, then say Y here. and your BIOS does not already do this for you, then say Y here.
Otherwise say N. Otherwise say N.
...@@ -1069,9 +1069,9 @@ config BLK_DEV_ALI14XX ...@@ -1069,9 +1069,9 @@ config BLK_DEV_ALI14XX
This driver is enabled at runtime using the "ali14xx.probe" kernel This driver is enabled at runtime using the "ali14xx.probe" kernel
boot parameter. It enables support for the secondary IDE interface boot parameter. It enables support for the secondary IDE interface
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
I/O speeds to be set as well. See the files I/O speeds to be set as well.
<file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c> See the files <file:Documentation/ide/ide.txt> and
for more info. <file:drivers/ide/legacy/ali14xx.c> for more info.
config BLK_DEV_DTC2278 config BLK_DEV_DTC2278
tristate "DTC-2278 support" tristate "DTC-2278 support"
...@@ -1079,7 +1079,7 @@ config BLK_DEV_DTC2278 ...@@ -1079,7 +1079,7 @@ config BLK_DEV_DTC2278
This driver is enabled at runtime using the "dtc2278.probe" kernel This driver is enabled at runtime using the "dtc2278.probe" kernel
boot parameter. It enables support for the secondary IDE interface boot parameter. It enables support for the secondary IDE interface
of the DTC-2278 card, and permits faster I/O speeds to be set as of the DTC-2278 card, and permits faster I/O speeds to be set as
well. See the <file:Documentation/ide.txt> and well. See the <file:Documentation/ide/ide.txt> and
<file:drivers/ide/legacy/dtc2278.c> files for more info. <file:drivers/ide/legacy/dtc2278.c> files for more info.
config BLK_DEV_HT6560B config BLK_DEV_HT6560B
...@@ -1088,7 +1088,7 @@ config BLK_DEV_HT6560B ...@@ -1088,7 +1088,7 @@ config BLK_DEV_HT6560B
This driver is enabled at runtime using the "ht6560b.probe" kernel This driver is enabled at runtime using the "ht6560b.probe" kernel
boot parameter. It enables support for the secondary IDE interface boot parameter. It enables support for the secondary IDE interface
of the Holtek card, and permits faster I/O speeds to be set as well. of the Holtek card, and permits faster I/O speeds to be set as well.
See the <file:Documentation/ide.txt> and See the <file:Documentation/ide/ide.txt> and
<file:drivers/ide/legacy/ht6560b.c> files for more info. <file:drivers/ide/legacy/ht6560b.c> files for more info.
config BLK_DEV_QD65XX config BLK_DEV_QD65XX
...@@ -1096,7 +1096,7 @@ config BLK_DEV_QD65XX ...@@ -1096,7 +1096,7 @@ config BLK_DEV_QD65XX
help help
This driver is enabled at runtime using the "qd65xx.probe" kernel This driver is enabled at runtime using the "qd65xx.probe" kernel
boot parameter. It permits faster I/O speeds to be set. See the boot parameter. It permits faster I/O speeds to be set. See the
<file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
for more info. for more info.
config BLK_DEV_UMC8672 config BLK_DEV_UMC8672
...@@ -1105,7 +1105,7 @@ config BLK_DEV_UMC8672 ...@@ -1105,7 +1105,7 @@ config BLK_DEV_UMC8672
This driver is enabled at runtime using the "umc8672.probe" kernel This driver is enabled at runtime using the "umc8672.probe" kernel
boot parameter. It enables support for the secondary IDE interface boot parameter. It enables support for the secondary IDE interface
of the UMC-8672, and permits faster I/O speeds to be set as well. of the UMC-8672, and permits faster I/O speeds to be set as well.
See the files <file:Documentation/ide.txt> and See the files <file:Documentation/ide/ide.txt> and
<file:drivers/ide/legacy/umc8672.c> for more info. <file:drivers/ide/legacy/umc8672.c> for more info.
endif endif
......
...@@ -1180,7 +1180,7 @@ static int __initdata is_chipset_set[MAX_HWIFS]; ...@@ -1180,7 +1180,7 @@ static int __initdata is_chipset_set[MAX_HWIFS];
* ide_setup() gets called VERY EARLY during initialization, * ide_setup() gets called VERY EARLY during initialization,
* to handle kernel "command line" strings beginning with "hdx=" or "ide". * to handle kernel "command line" strings beginning with "hdx=" or "ide".
* *
* Remember to update Documentation/ide.txt if you change something here. * Remember to update Documentation/ide/ide.txt if you change something here.
*/ */
static int __init ide_setup(char *s) static int __init ide_setup(char *s)
{ {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment