Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation/ABI/testing/sysfs-driver-xen-blkback

@@ -35,3 +35,12 @@ Description:
                 controls the duration in milliseconds that blkback will not
                 cache any page not backed by a grant mapping.
                 The default is 10ms.
+
+What:           /sys/module/xen_blkback/parameters/feature_persistent
+Date:           September 2020
+KernelVersion:  5.10
+Contact:        SeongJae Park <sjpark@amazon.de>
+Description:
+                Whether to enable the persistent grants feature or not.  Note
+                that this option only takes effect on newly created backends.
+                The default is Y (enable).

Documentation/ABI/testing/sysfs-driver-xen-blkfront

-What:           /sys/module/xen_blkfront/parameters/max
+What:           /sys/module/xen_blkfront/parameters/max_indirect_segments
 Date:           June 2013
 KernelVersion:  3.11
 Contact:        Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
@@ -8,3 +8,12 @@ Description:
                 is 32 - higher value means more potential throughput but more
                 memory usage. The backend picks the minimum of the frontend
                 and its default backend value.
+
+What:           /sys/module/xen_blkfront/parameters/feature_persistent
+Date:           September 2020
+KernelVersion:  5.10
+Contact:        SeongJae Park <sjpark@amazon.de>
+Description:
+                Whether to enable the persistent grants feature or not.  Note
+                that this option only takes effect on newly created frontends.
+                The default is Y (enable).

Documentation/admin-guide/LSM/SafeSetID.rst

@@ -3,9 +3,9 @@ SafeSetID
 =========
 SafeSetID is an LSM module that gates the setid family of syscalls to restrict
 UID/GID transitions from a given UID/GID to only those approved by a
-system-wide whitelist. These restrictions also prohibit the given UIDs/GIDs
+system-wide allowlist. These restrictions also prohibit the given UIDs/GIDs
 from obtaining auxiliary privileges associated with CAP_SET{U/G}ID, such as
-allowing a user to set up user namespace UID mappings.
+allowing a user to set up user namespace UID/GID mappings.
 
 
 Background
@@ -98,10 +98,21 @@ Directions for use
 ==================
 This LSM hooks the setid syscalls to make sure transitions are allowed if an
 applicable restriction policy is in place. Policies are configured through
-securityfs by writing to the safesetid/add_whitelist_policy and
-safesetid/flush_whitelist_policies files at the location where securityfs is
-mounted. The format for adding a policy is '<UID>:<UID>', using literal
-numbers, such as '123:456'. To flush the policies, any write to the file is
-sufficient. Again, configuring a policy for a UID will prevent that UID from
-obtaining auxiliary setid privileges, such as allowing a user to set up user
-namespace UID mappings.
+securityfs by writing to the safesetid/uid_allowlist_policy and
+safesetid/gid_allowlist_policy files at the location where securityfs is
+mounted. The format for adding a policy is '<UID>:<UID>' or '<GID>:<GID>',
+using literal numbers, and ending with a newline character such as '123:456\n'.
+Writing an empty string "" will flush the policy. Again, configuring a policy
+for a UID/GID will prevent that UID/GID from obtaining auxiliary setid
+privileges, such as allowing a user to set up user namespace UID/GID mappings.
+
+Note on GID policies and setgroups()
+==================
+In v5.9 we are adding support for limiting CAP_SETGID privileges as was done
+previously for CAP_SETUID. However, for compatibility with common sandboxing
+related code conventions in userspace, we currently allow arbitrary
+setgroups() calls for processes with CAP_SETGID restrictions. Until we add
+support in a future release for restricting setgroups() calls, these GID
+policies add no meaningful security. setgroups() restrictions will be enforced
+once we have the policy checking code in place, which will rely on GID policy
+configuration code added in v5.9.

Documentation/admin-guide/cpu-load.rst

@@ -61,43 +61,46 @@ will lead to quite erratic information inside ``/proc/stat``::
 
 	static volatile sig_atomic_t stop;
 
-	static void sighandler (int signr)
+	static void sighandler(int signr)
 	{
-	(void) signr;
-	stop = 1;
+		(void) signr;
+		stop = 1;
 	}
+
 	static unsigned long hog (unsigned long niters)
 	{
-	stop = 0;
-	while (!stop && --niters);
-	return niters;
+		stop = 0;
+		while (!stop && --niters);
+		return niters;
 	}
+
 	int main (void)
 	{
-	int i;
-	struct itimerval it = { .it_interval = { .tv_sec = 0, .tv_usec = 1 },
-				.it_value = { .tv_sec = 0, .tv_usec = 1 } };
-	sigset_t set;
-	unsigned long v[HIST];
-	double tmp = 0.0;
-	unsigned long n;
-	signal (SIGALRM, &sighandler);
-	setitimer (ITIMER_REAL, &it, NULL);
-
-	hog (ULONG_MAX);
-	for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog (ULONG_MAX);
-	for (i = 0; i < HIST; ++i) tmp += v[i];
-	tmp /= HIST;
-	n = tmp - (tmp / 3.0);
-
-	sigemptyset (&set);
-	sigaddset (&set, SIGALRM);
-
-	for (;;) {
-		hog (n);
-		sigwait (&set, &i);
-	}
-	return 0;
+		int i;
+		struct itimerval it = {
+			.it_interval = { .tv_sec = 0, .tv_usec = 1 },
+			.it_value    = { .tv_sec = 0, .tv_usec = 1 } };
+		sigset_t set;
+		unsigned long v[HIST];
+		double tmp = 0.0;
+		unsigned long n;
+		signal(SIGALRM, &sighandler);
+		setitimer(ITIMER_REAL, &it, NULL);
+
+		hog (ULONG_MAX);
+		for (i = 0; i < HIST; ++i) v[i] = ULONG_MAX - hog(ULONG_MAX);
+		for (i = 0; i < HIST; ++i) tmp += v[i];
+		tmp /= HIST;
+		n = tmp - (tmp / 3.0);
+
+		sigemptyset(&set);
+		sigaddset(&set, SIGALRM);
+
+		for (;;) {
+			hog(n);
+			sigwait(&set, &i);
+		}
+		return 0;
 	}
 
 

Documentation/admin-guide/kernel-parameters.txt

@@ -5978,6 +5978,13 @@
 			After which time (jiffies) the event handling loop
 			should start to delay EOI handling. Default is 2.
 
+	xen.fifo_events=	[XEN]
+			Boolean parameter to disable using fifo event handling
+			even if available. Normally fifo event handling is
+			preferred over the 2-level event handling, as it is
+			fairer and the number of possible event channels is
+			much higher. Default is on (use fifo events).
+
 	nopv=		[X86,XEN,KVM,HYPER_V,VMWARE]
 			Disables the PV optimizations forcing the guest to run
 			as generic guest with no PV drivers. Currently support

Documentation/admin-guide/sysctl/vm.rst

@@ -27,6 +27,7 @@ Currently, these files are in /proc/sys/vm:
 - admin_reserve_kbytes
 - block_dump
 - compact_memory
+- compaction_proactiveness
 - compact_unevictable_allowed
 - dirty_background_bytes
 - dirty_background_ratio
@@ -37,6 +38,7 @@ Currently, these files are in /proc/sys/vm:
 - dirty_writeback_centisecs
 - drop_caches
 - extfrag_threshold
+- highmem_is_dirtyable
 - hugetlb_shm_group
 - laptop_mode
 - legacy_va_layout

Documentation/arm64/hugetlbpage.rst

+.. _hugetlbpage_index:
+
 ====================
 HugeTLBpage on ARM64
 ====================

Documentation/block/queue-sysfs.rst

@@ -124,6 +124,10 @@ For zoned block devices (zoned attribute indicating "host-managed" or
 EXPLICIT OPEN, IMPLICIT OPEN or CLOSED, is limited by this value.
 If this value is 0, there is no limit.
 
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_ACTIVE_RESOURCE, which user space may see as the EOVERFLOW
+errno.
+
 max_open_zones (RO)
 -------------------
 For zoned block devices (zoned attribute indicating "host-managed" or
@@ -131,6 +135,10 @@ For zoned block devices (zoned attribute indicating "host-managed" or
 EXPLICIT OPEN or IMPLICIT OPEN, is limited by this value.
 If this value is 0, there is no limit.
 
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_OPEN_RESOURCE, which user space may see as the ETOOMANYREFS
+errno.
+
 max_sectors_kb (RW)
 -------------------
 This is the maximum number of kilobytes that the block layer will allow

Documentation/core-api/dma-api.rst

@@ -519,10 +519,9 @@ routines, e.g.:::
 Part II - Non-coherent DMA allocations
 --------------------------------------
 
-These APIs allow to allocate pages in the kernel direct mapping that are
-guaranteed to be DMA addressable.  This means that unlike dma_alloc_coherent,
-virt_to_page can be called on the resulting address, and the resulting
-struct page can be used for everything a struct page is suitable for.
+These APIs allow to allocate pages that are guaranteed to be DMA addressable
+by the passed in device, but which need explicit management of memory ownership
+for the kernel vs the device.
 
 If you don't understand how cache line coherency works between a processor and
 an I/O device, you should not be using this part of the API.
@@ -537,7 +536,7 @@ an I/O device, you should not be using this part of the API.
 This routine allocates a region of <size> bytes of consistent memory.  It
 returns a pointer to the allocated region (in the processor's virtual address
 space) or NULL if the allocation failed.  The returned memory may or may not
-be in the kernels direct mapping.  Drivers must not call virt_to_page on
+be in the kernel direct mapping.  Drivers must not call virt_to_page on
 the returned memory region.
 
 It also returns a <dma_handle> which may be cast to an unsigned integer the
@@ -565,7 +564,45 @@ reused.
 Free a region of memory previously allocated using dma_alloc_noncoherent().
 dev, size and dma_handle and dir must all be the same as those passed into
 dma_alloc_noncoherent().  cpu_addr must be the virtual address returned by
-the dma_alloc_noncoherent().
+dma_alloc_noncoherent().
+
+::
+
+	struct page *
+	dma_alloc_pages(struct device *dev, size_t size, dma_addr_t *dma_handle,
+			enum dma_data_direction dir, gfp_t gfp)
+
+This routine allocates a region of <size> bytes of non-coherent memory.  It
+returns a pointer to first struct page for the region, or NULL if the
+allocation failed. The resulting struct page can be used for everything a
+struct page is suitable for.
+
+It also returns a <dma_handle> which may be cast to an unsigned integer the
+same width as the bus and given to the device as the DMA address base of
+the region.
+
+The dir parameter specified if data is read and/or written by the device,
+see dma_map_single() for details.
+
+The gfp parameter allows the caller to specify the ``GFP_`` flags (see
+kmalloc()) for the allocation, but rejects flags used to specify a memory
+zone such as GFP_DMA or GFP_HIGHMEM.
+
+Before giving the memory to the device, dma_sync_single_for_device() needs
+to be called, and before reading memory written by the device,
+dma_sync_single_for_cpu(), just like for streaming DMA mappings that are
+reused.
+
+::
+
+	void
+	dma_free_pages(struct device *dev, size_t size, struct page *page,
+			dma_addr_t dma_handle, enum dma_data_direction dir)
+
+Free a region of memory previously allocated using dma_alloc_pages().
+dev, size and dma_handle and dir must all be the same as those passed into
+dma_alloc_noncoherent().  page must be the pointer returned by
+dma_alloc_pages().
 
 ::
 

Documentation/devicetree/bindings/arm/actions.yaml

@@ -20,6 +20,12 @@ properties:
           - enum:
               - allo,sparky # Allo.com Sparky
               - cubietech,cubieboard6 # Cubietech CubieBoard6
+              - roseapplepi,roseapplepi # RoseapplePi.org RoseapplePi
+          - const: actions,s500
+      - items:
+          - enum:
+              - caninos,labrador-base-m # Labrador Base Board M v1
+          - const: caninos,labrador-v2  # Labrador Core v2
           - const: actions,s500
       - items:
           - enum:
@@ -28,6 +34,11 @@ properties:
           - const: actions,s500
 
       # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
+      - items:
+          - enum:
+              - caninos,labrador-base-m2 # Labrador Base Board M v2
+          - const: caninos,labrador-v3   # Labrador Core v3
+          - const: actions,s700
       - items:
           - enum:
               - cubietech,cubieboard7 # Cubietech CubieBoard7
@@ -38,3 +49,5 @@ properties:
           - enum:
               - ucrobotics,bubblegum-96 # uCRobotics Bubblegum-96
           - const: actions,s900
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/altera.yaml

@@ -19,4 +19,7 @@ properties:
           - altr,socfpga-arria5
           - altr,socfpga-arria10
       - const: altr,socfpga
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/amazon,al.yaml

@@ -30,4 +30,6 @@ properties:
               - amazon,al-alpine-v3-evp
           - const: amazon,al-alpine-v3
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/amlogic.yaml

@@ -96,6 +96,7 @@ properties:
               - hwacom,amazetv
               - khadas,vim
               - libretech,aml-s905x-cc
+              - libretech,aml-s905x-cc-v2
               - nexbox,a95x
           - const: amlogic,s905x
           - const: amlogic,meson-gxl
@@ -153,6 +154,7 @@ properties:
               - azw,gtking
               - azw,gtking-pro
               - hardkernel,odroid-n2
+              - hardkernel,odroid-n2-plus
               - khadas,vim3
               - ugoos,am6
           - const: amlogic,s922x
@@ -171,4 +173,7 @@ properties:
           - enum:
               - amlogic,ad401
           - const: amlogic,a1
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/arm,integrator.yaml

@@ -83,4 +83,6 @@ required:
   - compatible
   - core-module@10000000
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/arm,realview.yaml

@@ -120,4 +120,6 @@ required:
   - compatible
   - soc
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/arm,versatile.yaml

@@ -68,4 +68,6 @@ required:
   - compatible
   - core-module@10000000
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml

@@ -216,4 +216,6 @@ allOf:
       required:
         - arm,hbi
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/atmel-at91.yaml

@@ -41,6 +41,7 @@ properties:
               - overkiz,kizboxmini-mb   # Overkiz kizbox Mini Mother Board
               - overkiz,kizboxmini-rd   # Overkiz kizbox Mini RailDIN
               - overkiz,smartkiz        # Overkiz SmartKiz Board
+              - gardena,smart-gateway-at91sam # GARDENA smart Gateway (Article No. 19000)
           - const: atmel,at91sam9g25
           - const: atmel,at91sam9x5
           - const: atmel,at91sam9
@@ -183,4 +184,6 @@ properties:
           - const: atmel,samv71
           - const: atmel,samv7
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/axxia.yaml

@@ -18,4 +18,6 @@ properties:
       - const: lsi,axm5516-amarillo
       - const: lsi,axm5516
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml

@@ -51,4 +51,6 @@ properties:
               - raspberrypi,3-compute-module-lite
           - const: brcm,bcm2837
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml

@@ -18,4 +18,6 @@ properties:
           - brcm,bcm28155-ap
       - const: brcm,bcm11351
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml

@@ -18,4 +18,6 @@ properties:
           - brcm,bcm21664-garnet
       - const: brcm,bcm21664
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml

@@ -18,4 +18,6 @@ properties:
           - brcm,bcm23550-sparrow
       - const: brcm,bcm23550
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml

@@ -83,6 +83,11 @@ properties:
               - brcm,bcm953012er
               - brcm,bcm953012hr
               - brcm,bcm953012k
+              - meraki,mr32
           - const: brcm,brcm53012
+          - const: brcm,brcm53016
           - const: brcm,bcm4708
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml

@@ -26,4 +26,6 @@ properties:
           - brcm,bcm58305
       - const: brcm,cygnus
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml

@@ -25,4 +25,6 @@ properties:
       - const: brcm,bcm53342
       - const: brcm,hr2
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml

@@ -20,4 +20,6 @@ properties:
           - brcm,ns2-xmc
       - const: brcm,ns2
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml

@@ -33,4 +33,6 @@ properties:
           - brcm,bcm88312
       - const: brcm,nsp
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml

@@ -21,4 +21,6 @@ properties:
           - brcm,bcm958802a802x
       - const: brcm,stingray
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml

@@ -19,4 +19,6 @@ properties:
           - cavium,thunderx2-cn9900
       - const: brcm,vulcan-soc
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/bitmain.yaml

@@ -17,4 +17,7 @@ properties:
       - enum:
           - bitmain,sophon-edge
       - const: bitmain,bm1880
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/calxeda.yaml

@@ -20,3 +20,5 @@ properties:
       - enum:
           - calxeda,highbank
           - calxeda,ecx-2000
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/digicolor.yaml

@@ -15,4 +15,6 @@ properties:
   compatible:
     const: cnxt,cx92755
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/fsl.yaml

@@ -120,6 +120,7 @@ properties:
               - fsl,imx6q-sabrelite
               - fsl,imx6q-sabresd
               - kontron,imx6q-samx6i      # Kontron i.MX6 Dual/Quad SMARC Module
+              - logicpd,imx6q-logicpd
               - prt,prti6q                # Protonic PRTI6Q board
               - prt,prtwd2                # Protonic WD2 board
               - technexion,imx6q-pico-dwarf   # TechNexion i.MX6Q Pico-Dwarf
@@ -156,6 +157,21 @@ properties:
           - const: gw,ventana
           - const: fsl,imx6q
 
+      - description: i.MX6Q PHYTEC phyBOARD-Mira
+        items:
+          - enum:
+              - phytec,imx6q-pbac06-emmc  # PHYTEC phyBOARD-Mira eMMC RDK
+              - phytec,imx6q-pbac06-nand  # PHYTEC phyBOARD-Mira NAND RDK
+          - const: phytec,imx6q-pbac06    # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6q
+
+      - description: i.MX6Q PHYTEC phyFLEX-i.MX6
+        items:
+          - const: phytec,imx6q-pbab01    # PHYTEC phyFLEX carrier board
+          - const: phytec,imx6q-pfla02    # PHYTEC phyFLEX-i.MX6 Quad
+          - const: fsl,imx6q
+
       - description: i.MX6QP based Boards
         items:
           - enum:
@@ -163,6 +179,13 @@ properties:
               - fsl,imx6qp-sabresd        # i.MX6 Quad Plus SABRE Smart Device Board
           - const: fsl,imx6qp
 
+      - description: i.MX6QP PHYTEC phyBOARD-Mira
+        items:
+          - const: phytec,imx6qp-pbac06-nand
+          - const: phytec,imx6qp-pbac06   # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6qp
+
       - description: i.MX6DL based Boards
         items:
           - enum:
@@ -188,6 +211,7 @@ properties:
               - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3
               - ysoft,imx6dl-yapp4-draco  # i.MX6 DualLite Y Soft IOTA Draco board
               - ysoft,imx6dl-yapp4-hydra  # i.MX6 DualLite Y Soft IOTA Hydra board
+              - ysoft,imx6dl-yapp4-orion  # i.MX6 DualLite Y Soft IOTA Orion board
               - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
           - const: fsl,imx6dl
 
@@ -211,10 +235,26 @@ properties:
           - const: gw,ventana
           - const: fsl,imx6dl
 
+      - description: i.MX6DL PHYTEC phyBOARD-Mira
+        items:
+          - enum:
+              - phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+              - phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+          - const: phytec,imx6dl-pbac06   # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL PHYTEC phyFLEX-i.MX6
+        items:
+          - const: phytec,imx6dl-pbab01   # PHYTEC phyFLEX carrier board
+          - const: phytec,imx6dl-pfla02   # PHYTEC phyFLEX-i.MX6 Quad
+          - const: fsl,imx6dl
+
       - description: i.MX6SL based Boards
         items:
           - enum:
               - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+              - kobo,tolino-shine2hd
               - kobo,tolino-shine3
           - const: fsl,imx6sl
 
@@ -246,6 +286,15 @@ properties:
               - technexion,imx6ul-pico-pi      # TechNexion i.MX6UL Pico-Pi
           - const: fsl,imx6ul
 
+      - description: i.MX6UL PHYTEC phyBOARD-Segin
+        items:
+          - enum:
+              - phytec,imx6ul-pbacd10-emmc
+              - phytec,imx6ul-pbacd10-nand
+          - const: phytec,imx6ul-pbacd10  # PHYTEC phyBOARD-Segin with i.MX6 UL
+          - const: phytec,imx6ul-pcl063   # PHYTEC phyCORE-i.MX 6UL
+          - const: fsl,imx6ul
+
       - description: Kontron N6310 S Board
         items:
           - const: kontron,imx6ul-n6310-s
@@ -277,6 +326,15 @@ properties:
               - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
           - const: fsl,imx6ull
 
+      - description: i.MX6ULL PHYTEC phyBOARD-Segin
+        items:
+          - enum:
+              - phytec,imx6ull-pbacd10-emmc
+              - phytec,imx6ull-pbacd10-nand
+          - const: phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL
+          - const: phytec,imx6ull-pcl063  # PHYTEC phyCORE-i.MX 6ULL
+          - const: fsl,imx6ull
+
       - description: Kontron N6411 S Board
         items:
           - const: kontron,imx6ull-n6411-s
@@ -344,7 +402,16 @@ properties:
       - description: i.MX8MM based Boards
         items:
           - enum:
+              - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
+              - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
+          - const: fsl,imx8mm
+
+      - description: Variscite VAR-SOM-MX8MM based boards
+        items:
+          - const: variscite,var-som-mx8mm-symphony
+          - const: variscite,var-som-mx8mm
           - const: fsl,imx8mm
 
       - description: i.MX8MN based Boards
@@ -354,6 +421,12 @@ properties:
               - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
           - const: fsl,imx8mn
 
+      - description: Variscite VAR-SOM-MX8MN based boards
+        items:
+          - const: variscite,var-som-mx8mn-symphony
+          - const: variscite,var-som-mx8mn
+          - const: fsl,imx8mn
+
       - description: i.MX8MP based Boards
         items:
           - enum:
@@ -372,13 +445,35 @@ properties:
               - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk
           - const: fsl,imx8mq
 
+      - description: Purism Librem5 phones
+        items:
+          - enum:
+              - purism,librem5r2          # Purism Librem5 phone "Chestnut"
+              - purism,librem5r3          # Purism Librem5 phone "Dogwood"
+          - const: purism,librem5
+          - const: fsl,imx8mq
+
+      - description: Zodiac Inflight Innovations Ultra Boards
+        items:
+          - enum:
+              - zii,imx8mq-ultra-rmb3
+              - zii,imx8mq-ultra-zest
+          - const: zii,imx8mq-ultra
+          - const: fsl,imx8mq
+
       - description: i.MX8QXP based Boards
         items:
           - enum:
               - einfochips,imx8qxp-ai_ml  # i.MX8QXP AI_ML Board
               - fsl,imx8qxp-mek           # i.MX8QXP MEK Board
               - toradex,colibri-imx8x         # Colibri iMX8X Module
+          - const: fsl,imx8qxp
+
+      - description: Toradex Colibri i.MX8 Evaluation Board
+        items:
+          - enum:
               - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3
+          - const: toradex,colibri-imx8x
           - const: fsl,imx8qxp
 
       - description:
@@ -526,4 +621,6 @@ properties:
               - fsl,s32v234-evb           # S32V234-EVB2 Customer Evaluation Board
           - const: fsl,s32v234
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml

@@ -64,4 +64,7 @@ properties:
         items:
           - const: H836ASDJ
           - const: hisilicon,sd5203
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/intel,keembay.yaml

@@ -16,4 +16,7 @@ properties:
       - enum:
           - intel,keembay-evm
       - const: intel,keembay
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml

@@ -22,3 +22,5 @@ properties:
           - enum:
               - gateworks,gw2358
           - const: intel,ixp43x
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml

@@ -42,3 +42,5 @@ properties:
       - description: TI-SCI processor id for the remote processor device
       - description: TI-SCI host id to which processor control ownership
                      should be transferred to
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml

@@ -59,3 +59,5 @@ properties:
           - const: marvell,cn9130
           - const: marvell,armada-ap807-quad
           - const: marvell,armada-ap807
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/mediatek.yaml

@@ -119,4 +119,7 @@ properties:
           - const: google,krane-sku176
           - const: google,krane
           - const: mediatek,mt8183
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/microchip,sparx5.yaml

@@ -62,4 +62,6 @@ required:
   - compatible
   - axi@600000000
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/moxart.yaml

@@ -16,4 +16,5 @@ properties:
       - const: moxa,moxart-uc-7112-lx
       - const: moxa,moxart
 
+additionalProperties: true
 ...

Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml

@@ -35,4 +35,7 @@ properties:
           - enum:
               - dell,wyse-ariel
           - const: marvell,mmp3
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/mstar/mstar.yaml

@@ -31,3 +31,5 @@ properties:
           - enum:
               - 70mai,midrived08 # 70mai midrive d08
           - const: mstar,mercury5
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml

@@ -21,4 +21,6 @@ properties:
               - ea,ea3250
               - phytec,phy3250
           - const: nxp,lpc3250
+
+additionalProperties: true
 ...

Documentation/devicetree/bindings/arm/omap/prm-inst.txt

@@ -18,6 +18,7 @@ Required properties:
 		(base address and length)
 
 Optional properties:
+- #power-domain-cells:	Should be 0 if the instance is a power domain provider.
 - #reset-cells:	Should be 1 if the PRM instance in question supports resets.
 
 Example:
@@ -25,5 +26,6 @@ Example:
 prm_dsp2: prm@1b00 {
 	compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
 	reg = <0x1b00 0x40>;
+	#power-domain-cells = <0>;
 	#reset-cells = <1>;
 };

Documentation/devicetree/bindings/arm/qcom.yaml

@@ -40,6 +40,7 @@ description: |
         sdm630
         sdm660
         sdm845
+        sm8250
 
   The 'board' element must be one of the following strings:
 
@@ -47,6 +48,8 @@ description: |
         cp01-c1
         dragonboard
         hk01
+        hk10-c1
+        hk10-c2
         idp
         liquid
         mtp
@@ -150,6 +153,8 @@ properties:
       - items:
           - enum:
               - qcom,ipq8074-hk01
+              - qcom,ipq8074-hk10-c1
+              - qcom,ipq8074-hk10-c2
           - const: qcom,ipq8074
 
       - items:
@@ -167,4 +172,12 @@ properties:
               - qcom,ipq6018-cp01-c1
           - const: qcom,ipq6018
 
+      - items:
+          - enum:
+              - qcom,qrb5165-rb5
+              - qcom,sm8250-mtp
+          - const: qcom,sm8250
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/rda.yaml

@@ -19,4 +19,6 @@ properties:
           - xunlong,orangepi-i96        # Orange Pi i96
       - const: rda,8810pl
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/realtek.yaml

@@ -54,4 +54,7 @@ properties:
           - enum:
               - realtek,mjolnir # Realtek Mjolnir EVB
           - const: realtek,rtd1619
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/renesas.yaml

@@ -281,10 +281,24 @@ properties:
               - renesas,draak # Draak (RTP0RC77995SEB0010S)
           - const: renesas,r8a77995
 
+      - description: R-Car V3U (R8A779A0)
+        items:
+          - enum:
+              - renesas,falcon-cpu # Falcon CPU board (RTP0RC779A0CPB0010S)
+          - const: renesas,r8a779a0
+
+      - items:
+          - enum:
+              - renesas,falcon-breakout # Falcon BreakOut board (RTP0RC779A0BOB0010S)
+          - const: renesas,falcon-cpu
+          - const: renesas,r8a779a0
+
       - description: RZ/N1D (R9A06G032)
         items:
           - enum:
               - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
           - const: renesas,r9a06g032
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -104,6 +104,11 @@ properties:
               - firefly,roc-rk3399-pc-mezzanine
           - const: rockchip,rk3399
 
+      - description: FriendlyElec NanoPi R2S
+        items:
+          - const: friendlyarm,nanopi-r2s
+          - const: rockchip,rk3328
+
       - description: FriendlyElec NanoPi4 series boards
         items:
           - enum:
@@ -430,8 +435,12 @@ properties:
           - const: radxa,rock
           - const: rockchip,rk3188
 
-      - description: Radxa ROCK Pi 4
+      - description: Radxa ROCK Pi 4A/B/C
         items:
+          - enum:
+              - radxa,rockpi4a
+              - radxa,rockpi4b
+              - radxa,rockpi4c
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
@@ -555,4 +564,12 @@ properties:
         items:
           - const: tronsmart,orion-r68-meta
           - const: rockchip,rk3368
+
+      - description: Zkmagic A95X Z2
+        items:
+          - const: zkmagic,a95x-z2
+          - const: rockchip,rk3318
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/samsung/pmu.yaml

@@ -24,6 +24,7 @@ select:
           - samsung,exynos5420-pmu
           - samsung,exynos5433-pmu
           - samsung,exynos7-pmu
+          - samsung-s5pv210-pmu
   required:
     - compatible
 
@@ -40,6 +41,7 @@ properties:
           - samsung,exynos5420-pmu
           - samsung,exynos5433-pmu
           - samsung,exynos7-pmu
+          - samsung-s5pv210-pmu
       - const: syscon
 
   reg:
@@ -88,12 +90,28 @@ properties:
 required:
   - compatible
   - reg
-  - '#clock-cells'
-  - clock-names
-  - clocks
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-pmu
+              - samsung,exynos4210-pmu
+              - samsung,exynos4412-pmu
+              - samsung,exynos5250-pmu
+              - samsung,exynos5410-pmu
+              - samsung,exynos5420-pmu
+              - samsung,exynos5433-pmu
+    then:
+      required:
+        - '#clock-cells'
+        - clock-names
+        - clocks
+
 examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>

Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml

@@ -180,3 +180,5 @@ properties:
 
 required:
   - compatible
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/sirf.yaml

@@ -24,4 +24,7 @@ properties:
       - items:
           - const: sirf,prima2-cb
           - const: sirf,prima2
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml

@@ -19,4 +19,7 @@ properties:
           - enum:
               - socionext,milbeaut-m10v-evb
           - const: socionext,sc2000a
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/socionext/uniphier.yaml

@@ -60,3 +60,5 @@ properties:
           - enum:
               - socionext,uniphier-pxs3-ref
           - const: socionext,uniphier-pxs3
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/spear.yaml

@@ -22,4 +22,7 @@ properties:
           - st,spear320
           - st,spear1310
           - st,spear1340
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/sprd/sprd.yaml

@@ -30,4 +30,6 @@ properties:
               - sprd,sp9863a-1h10
           - const: sprd,sc9863a
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/sti.yaml

@@ -20,4 +20,7 @@ properties:
           - st,stih407
           - st,stih410
           - st,stih418
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/stm32/stm32.yaml

@@ -52,4 +52,13 @@ properties:
           - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
+      - description: Odyssey STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - seeed,stm32mp157c-odyssey
+          - const: seeed,stm32mp157c-odyssey-som
+          - const: st,stm32mp157
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/sunxi.yaml

@@ -16,6 +16,11 @@ properties:
   compatible:
     oneOf:
 
+      - description: Allwinner A100 Perf1 Board
+        items:
+          - const: allwinner,a100-perf1
+          - const: allwinner,sun50i-a100
+
       - description: Allwinner A23 Evaluation Board
         items:
           - const: allwinner,sun8i-a23-evb
@@ -626,6 +631,11 @@ properties:
           - const: pine64,pine64-plus
           - const: allwinner,sun50i-a64
 
+      - description: Pine64 PineCube
+        items:
+          - const: pine64,pinecube
+          - const: allwinner,sun8i-s3
+
       - description: Pine64 PineH64 model A
         items:
           - const: pine64,pine-h64
@@ -883,3 +893,5 @@ properties:
         items:
           - const: xunlong,orangepi-zero-plus2-h3
           - const: allwinner,sun8i-h3
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/tegra.yaml

@@ -121,3 +121,9 @@ properties:
         items:
           - const: nvidia,p3509-0000+p3668-0000
           - const: nvidia,tegra194
+      - items:
+          - enum:
+              - nvidia,tegra234-vdk
+          - const: nvidia,tegra234
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt

@@ -4,6 +4,7 @@ Required properties:
 - compatible: Should contain one of the following:
   - "nvidia,tegra186-pmc": for Tegra186
   - "nvidia,tegra194-pmc": for Tegra194
+  - "nvidia,tegra234-pmc": for Tegra234
 - reg: Must contain an (offset, length) pair of the register set for each
   entry in reg-names.
 - reg-names: Must include the following entries:
@@ -11,7 +12,7 @@ Required properties:
   - "wake"
   - "aotag"
   - "scratch"
-  - "misc" (Only for Tegra194)
+  - "misc" (Only for Tegra194 and later)
 
 Optional properties:
 - nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.

Documentation/devicetree/bindings/arm/ti/k3.txt

-Texas Instruments K3 Multicore SoC architecture device tree bindings
---------------------------------------------------------------------
-
-Platforms based on Texas Instruments K3 Multicore SoC architecture
-shall follow the following scheme:
-
-SoCs
-----
-
-Each device tree root node must specify which exact SoC in K3 Multicore SoC
-architecture it uses, using one of the following compatible values:
-
-- AM654
-  compatible = "ti,am654";
-
-- J721E
-  compatible = "ti,j721e";
-
-Boards
-------
-
-In addition, each device tree root node must specify which one or more
-of the following board-specific compatible values:
-
-- AM654 EVM
-  compatible = "ti,am654-evm", "ti,am654";

Documentation/devicetree/bindings/arm/ti/k3.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/k3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC architecture device tree bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Platforms based on Texas Instruments K3 Multicore SoC architecture
+  shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: K3 AM654 SoC
+        items:
+          - enum:
+              - ti,am654-evm
+          - const: ti,am654
+
+      - description: K3 J721E SoC
+        items:
+          - const: ti,j721e
+
+      - description: K3 J7200 SoC
+        items:
+          - const: ti,j7200
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/arm/ti/nspire.yaml

@@ -21,4 +21,7 @@ properties:
           - ti,nspire-tp
           # Clickpad models
           - ti,nspire-clp
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml

@@ -23,4 +23,7 @@ properties:
           - enbw,cmc        # EnBW AM1808 based CMC board
           - lego,ev3        # LEGO MINDSTORMS EV3 (AM1808 based)
       - const: ti,da850
+
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/toshiba.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/toshiba.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti Platform Device Tree Bindings
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Visconti5 TMPV7708
+        items:
+          - enum:
+              - toshiba,tmpv7708-rm-mbrc  # TMPV7708 RM main board
+          - const: toshiba,tmpv7708
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/arm/ux500.yaml

@@ -34,3 +34,5 @@ properties:
         items:
           - const: samsung,golden
           - const: st-ericsson,u8500
+
+additionalProperties: true

Documentation/devicetree/bindings/arm/vt8500.yaml

@@ -21,3 +21,6 @@ properties:
           - wm,wm8650
           - wm,wm8750
           - wm,wm8850
+          
+additionalProperties: true
+

Documentation/devicetree/bindings/arm/xilinx.yaml

@@ -111,4 +111,6 @@ properties:
           - const: xlnx,zynqmp-zcu111
           - const: xlnx,zynqmp
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/arm/zte.yaml

@@ -23,4 +23,6 @@ properties:
               - zte,zx296718-evb
           - const: zte,zx296718
 
+additionalProperties: true
+
 ...

Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt

@@ -10,7 +10,8 @@ Required properties:
     "brcm,bcm7038-gisb-arb" for 130nm chips
 - reg: specifies the base physical address and size of the registers
 - interrupts: specifies the two interrupts (timeout and TEA) to be used from
-  the parent interrupt controller
+  the parent interrupt controller. A third optional interrupt may be specified
+  for breakpoints.
 
 Optional properties:
 

Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml

@@ -23,7 +23,9 @@ properties:
       - items:
           - const: allwinner,sun7i-a20-crypto
           - const: allwinner,sun4i-a10-crypto
+      - const: allwinner,sun8i-a33-crypto
       - items:
+          - const: allwinner,sun8i-v3s-crypto
           - const: allwinner,sun8i-a33-crypto
 
   reg:
@@ -59,7 +61,9 @@ if:
   properties:
     compatible:
       contains:
-        const: allwinner,sun6i-a31-crypto
+        enum:
+          - allwinner,sun6i-a31-crypto
+          - allwinner,sun8i-a33-crypto
 
 then:
   required:

Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml

@@ -7,17 +7,17 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Toshiba TC358775 DSI to LVDS bridge bindings
 
 maintainers:
- - Vinay Simha BN <simhavcs@gmail.com>
+  - Vinay Simha BN <simhavcs@gmail.com>
 
 description: |
- This binding supports DSI to LVDS bridge TC358775
+  This binding supports DSI to LVDS bridge TC358775
 
- MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
- Video frame size:
- Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
- limited by 135 MHz LVDS speed
- Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
- panel, limited by 270 MHz LVDS speed.
+  MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
+  Video frame size:
+  Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
+  limited by 135 MHz LVDS speed
+  Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
+  panel, limited by 270 MHz LVDS speed.
 
 properties:
   compatible:
@@ -29,7 +29,7 @@ properties:
 
   vdd-supply:
     maxItems: 1
-    description:  1.2V LVDS Power Supply
+    description: 1.2V LVDS Power Supply
 
   vddio-supply:
     maxItems: 1
@@ -77,16 +77,18 @@ properties:
       - port@1
 
 required:
- - compatible
- - reg
- - vdd-supply
- - vddio-supply
- - stby-gpios
- - reset-gpios
- - ports
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+  - stby-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
 
 examples:
- - |
+  - |
     #include <dt-bindings/gpio/gpio.h>
 
     /* For single-link LVDS display panel */
@@ -147,7 +149,7 @@ examples:
          };
      };
 
- - |
+  - |
     /* For dual-link LVDS display panel */
 
     i2c@78b8000 {

Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml

@@ -13,9 +13,8 @@ properties:
   compatible:
     items:
       - enum:
-        - bananapi,lhr050h41
-        - feixin,k101-im2byl02
-
+          - bananapi,lhr050h41
+          - feixin,k101-im2byl02
       - const: ilitek,ili9881c
 
   backlight: true

Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml

@@ -19,9 +19,12 @@ properties:
     description: The cell is the request line number.
 
   compatible:
-    enum:
-      - allwinner,sun50i-a64-dma
-      - allwinner,sun50i-h6-dma
+    oneOf:
+      - const: allwinner,sun50i-a64-dma
+      - const: allwinner,sun50i-h6-dma
+      - items:
+          - const: allwinner,sun8i-r40-dma
+          - const: allwinner,sun50i-a64-dma
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml

@@ -48,6 +48,7 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/eeprom/at25.yaml

@@ -81,14 +81,14 @@ properties:
   at25,byte-len:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-       Total eeprom size in bytes. Deprecated, use "size" property instead.
+      Total eeprom size in bytes. Deprecated, use "size" property instead.
     deprecated: true
 
   at25,addr-mode:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-       Addr-mode flags, as defined in include/linux/spi/eeprom.h.
-       Deprecated, use "address-width" property instead.
+      Addr-mode flags, as defined in include/linux/spi/eeprom.h.
+      Deprecated, use "address-width" property instead.
     deprecated: true
 
   at25,page-size:

Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt

@@ -7,6 +7,7 @@ Required properties:
   For Tegra132 must contain "nvidia,tegra132-efuse", "nvidia,tegra124-efuse".
   For Tegra210 must contain "nvidia,tegra210-efuse". For Tegra186 must contain
   "nvidia,tegra186-efuse". For Tegra194 must contain "nvidia,tegra194-efuse".
+  For Tegra234 must contain "nvidia,tegra234-efuse".
   Details:
   nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
 	due to a hardware bug. Tegra20 also lacks certain information which is

Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml

@@ -43,8 +43,8 @@ properties:
   gpio-controller: true
 
   gpio-line-names:
-      minItems: 1
-      maxItems: 8
+    minItems: 1
+    maxItems: 8
 
 required:
   - compatible

Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml

@@ -25,6 +25,7 @@ properties:
               - allwinner,sun4i-a10-mali
               - allwinner,sun7i-a20-mali
               - allwinner,sun8i-h3-mali
+              - allwinner,sun8i-r40-mali
               - allwinner,sun50i-a64-mali
               - rockchip,rk3036-mali
               - rockchip,rk3066-mali
@@ -131,6 +132,7 @@ allOf:
             enum:
               - allwinner,sun4i-a10-mali
               - allwinner,sun7i-a20-mali
+              - allwinner,sun8i-r40-mali
               - allwinner,sun50i-a64-mali
               - allwinner,sun50i-h5-mali
               - amlogic,meson8-mali

Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
+
+maintainers:
+  - Doug Anderson <dianders@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+  On some ChromeOS board designs we've got a connection to the EC
+  (embedded controller) but no direct connection to some devices on the
+  other side of the EC (like a battery and PMIC).  To get access to
+  those devices we need to tunnel our i2c commands through the EC.
+
+  The node for this device should be under a cros-ec node like
+  google,cros-ec-spi or google,cros-ec-i2c.
+
+allOf:
+  - $ref: i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: google,cros-ec-i2c-tunnel
+
+  google,remote-bus:
+    description: The EC bus we'd like to talk to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - google,remote-bus
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+
+            i2c-tunnel {
+                compatible = "google,cros-ec-i2c-tunnel";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                google,remote-bus = <0>;
+
+                battery: sbs-battery@b {
+                    compatible = "sbs,sbs-battery";
+                    reg = <0xb>;
+                    sbs,poll-retry-count = <1>;
+                };
+            };
+        };
+    };

Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt

-I2C bus that tunnels through the ChromeOS EC (cros-ec)
-======================================================
-On some ChromeOS board designs we've got a connection to the EC (embedded
-controller) but no direct connection to some devices on the other side of
-the EC (like a battery and PMIC).  To get access to those devices we need
-to tunnel our i2c commands through the EC.
-
-The node for this device should be under a cros-ec node like google,cros-ec-spi
-or google,cros-ec-i2c.
-
-
-Required properties:
-- compatible: google,cros-ec-i2c-tunnel
-- google,remote-bus: The EC bus we'd like to talk to.
-
-Optional child nodes:
-- One node per I2C device connected to the tunnelled I2C bus.
-
-
-Example:
-	cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-
-		...
-
-		i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			google,remote-bus = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-		};
-	}

Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml

@@ -19,11 +19,11 @@ properties:
   compatible:
     oneOf:
       - enum:
-        - ingenic,jz4770-i2c
-        - ingenic,x1000-i2c
+          - ingenic,jz4770-i2c
+          - ingenic,x1000-i2c
       - items:
-        - const: ingenic,jz4780-i2c
-        - const: ingenic,jz4770-i2c
+          - const: ingenic,jz4780-i2c
+          - const: ingenic,jz4770-i2c
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml

@@ -43,4 +43,5 @@ examples:
         vref-supply = <&adc_vref>;
       };
     };
-...
\ No newline at end of file
+...
+

Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml

@@ -46,7 +46,8 @@ properties:
   spi-max-frequency: true
 
   spi-cpol: true
-  spi-cpha : true
+
+  spi-cpha: true
 
   "#io-channel-cells":
     const: 1

Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml

@@ -22,8 +22,8 @@ properties:
   adc-reserved-channels:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-       Bitmask of reserved channels, i.e. channels that cannot be
-       used by the OS.
+      Bitmask of reserved channels, i.e. channels that cannot be
+      used by the OS.
 
   clocks:
     maxItems: 1

Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml

@@ -21,7 +21,7 @@ properties:
 
   gpios:
     description:
-       GPIO used for controlling the reset pin
+      GPIO used for controlling the reset pin
     maxItems: 1
 
   spi-max-frequency: true

Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml

@@ -28,6 +28,8 @@ required:
   - reg
   - vref-supply
 
+additionalProperties: false
+
 examples:
   - |
     i2c {

Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml

@@ -32,6 +32,8 @@ required:
   - compatible
   - reg
 
+additionalProperties: false
+
 examples:
   - |
     i2c0 {

Documentation/devicetree/bindings/input/adc-joystick.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ADC attached joystick
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Bindings for joystick devices connected to ADC controllers supporting
+  the Industrial I/O subsystem.
+
+properties:
+  compatible:
+    const: adc-joystick
+
+  io-channels:
+    minItems: 1
+    maxItems: 1024
+    description: >
+      List of phandle and IIO specifier pairs.
+      Each pair defines one ADC channel to which a joystick axis is connected.
+      See Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - io-channels
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+patternProperties:
+  "^axis@[0-9a-f]+$":
+    type: object
+    description: >
+      Represents a joystick axis bound to the given ADC channel.
+      For each entry in the io-channels list, one axis subnode with a matching
+      reg property must be specified.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1023
+        description: Index of an io-channels list entry bound to this axis.
+
+      linux,code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: EV_ABS specific event code generated by the axis.
+
+      abs-range:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+          - items:
+              - description: minimum value
+              - description: maximum value
+        description: >
+          Minimum and maximum values produced by the axis.
+          For an ABS_X axis this will be the left-most and right-most
+          inclination of the joystick. If min > max, it is left to userspace to
+          treat the axis as inverted.
+          This property is interpreted as two signed 32 bit values.
+
+      abs-fuzz:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Amount of noise in the input value.
+          Omitting this property indicates the axis is precise.
+
+      abs-flat:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Axial "deadzone", or area around the center position, where the axis
+          is considered to be at rest.
+          Omitting this property indicates the axis always returns to exactly
+          the center position.
+
+    required:
+      - reg
+      - linux,code
+      - abs-range
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+    #include <dt-bindings/input/input.h>
+
+    joystick: adc-joystick {
+      compatible = "adc-joystick";
+      io-channels = <&adc INGENIC_ADC_TOUCH_XP>,
+                    <&adc INGENIC_ADC_TOUCH_YP>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      axis@0 {
+              reg = <0>;
+              linux,code = <ABS_X>;
+              abs-range = <3300 0>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+      axis@1 {
+              reg = <1>;
+              linux,code = <ABS_Y>;
+              abs-range = <0 3300>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+    };

Documentation/devicetree/bindings/input/cros-ec-keyb.txt

-ChromeOS EC Keyboard
-
-Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on
-a separate EC (Embedded Controller) device. It provides a message for reading
-key scans from the EC. These are then converted into keycodes for processing
-by the kernel.
-
-This binding is based on matrix-keymap.txt and extends/modifies it as follows:
-
-Required properties:
-- compatible: "google,cros-ec-keyb"
-
-Optional properties:
-- google,needs-ghost-filter: True to enable a ghost filter for the matrix
-keyboard. This is recommended if the EC does not have its own logic or
-hardware for this.
-
-
-Example:
-
-cros-ec-keyb {
-	compatible = "google,cros-ec-keyb";
-	keypad,num-rows = <8>;
-	keypad,num-columns = <13>;
-	google,needs-ghost-filter;
-	/*
-	 * Keymap entries take the form of 0xRRCCKKKK where
-	 * RR=Row CC=Column KKKK=Key Code
-	 * The values below are for a US keyboard layout and
-	 * are taken from the Linux driver. Note that the
-	 * 102ND key is not used for US keyboards.
-	 */
-	linux,keymap = <
-		/* CAPSLCK F1         B          F10     */
-		0x0001003a 0x0002003b 0x00030030 0x00040044
-		/* N       =          R_ALT      ESC     */
-		0x00060031 0x0008000d 0x000a0064 0x01010001
-		/* F4      G          F7         H       */
-		0x0102003e 0x01030022 0x01040041 0x01060023
-		/* '       F9         BKSPACE    L_CTRL  */
-		0x01080028 0x01090043 0x010b000e 0x0200001d
-		/* TAB     F3         T          F6      */
-		0x0201000f 0x0202003d 0x02030014 0x02040040
-		/* ]       Y          102ND      [       */
-		0x0205001b 0x02060015 0x02070056 0x0208001a
-		/* F8      GRAVE      F2         5       */
-		0x02090042 0x03010029 0x0302003c 0x03030006
-		/* F5      6          -          \       */
-		0x0304003f 0x03060007 0x0308000c 0x030b002b
-		/* R_CTRL  A          D          F       */
-		0x04000061 0x0401001e 0x04020020 0x04030021
-		/* S       K          J          ;       */
-		0x0404001f 0x04050025 0x04060024 0x04080027
-		/* L       ENTER      Z          C       */
-		0x04090026 0x040b001c 0x0501002c 0x0502002e
-		/* V       X          ,          M       */
-		0x0503002f 0x0504002d 0x05050033 0x05060032
-		/* L_SHIFT /          .          SPACE   */
-		0x0507002a 0x05080035 0x05090034 0x050B0039
-		/* 1       3          4          2       */
-		0x06010002 0x06020004 0x06030005 0x06040003
-		/* 8       7          0          9       */
-		0x06050009 0x06060008 0x0608000b 0x0609000a
-		/* L_ALT   DOWN       RIGHT      Q       */
-		0x060a0038 0x060b006c 0x060c006a 0x07010010
-		/* E       R          W          I       */
-		0x07020012 0x07030013 0x07040011 0x07050017
-		/* U       R_SHIFT    P          O       */
-		0x07060016 0x07070036 0x07080019 0x07090018
-		/* UP      LEFT    */
-		0x070b0067 0x070c0069>;
-};

Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/google,cros-ec-keyb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC Keyboard
+
+maintainers:
+  - Simon Glass <sjg@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+description: |
+  Google's ChromeOS EC Keyboard is a simple matrix keyboard
+  implemented on a separate EC (Embedded Controller) device. It provides
+  a message for reading key scans from the EC. These are then converted
+  into keycodes for processing by the kernel.
+
+allOf:
+  - $ref: "/schemas/input/matrix-keymap.yaml#"
+
+properties:
+  compatible:
+    const: google,cros-ec-keyb
+
+  google,needs-ghost-filter:
+    description:
+      Enable a ghost filter for the matrix keyboard. This is recommended
+      if the EC does not have its own logic or hardware for this.
+    type: boolean
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    cros-ec-keyb {
+        compatible = "google,cros-ec-keyb";
+        keypad,num-rows = <8>;
+        keypad,num-columns = <13>;
+        google,needs-ghost-filter;
+        /*
+         * Keymap entries take the form of 0xRRCCKKKK where
+         * RR=Row CC=Column KKKK=Key Code
+         * The values below are for a US keyboard layout and
+         * are taken from the Linux driver. Note that the
+         * 102ND key is not used for US keyboards.
+         */
+        linux,keymap = <
+            /* CAPSLCK F1         B          F10     */
+            0x0001003a 0x0002003b 0x00030030 0x00040044
+            /* N       =          R_ALT      ESC     */
+            0x00060031 0x0008000d 0x000a0064 0x01010001
+            /* F4      G          F7         H       */
+            0x0102003e 0x01030022 0x01040041 0x01060023
+            /* '       F9         BKSPACE    L_CTRL  */
+            0x01080028 0x01090043 0x010b000e 0x0200001d
+            /* TAB     F3         T          F6      */
+            0x0201000f 0x0202003d 0x02030014 0x02040040
+            /* ]       Y          102ND      [       */
+            0x0205001b 0x02060015 0x02070056 0x0208001a
+            /* F8      GRAVE      F2         5       */
+            0x02090042 0x03010029 0x0302003c 0x03030006
+            /* F5      6          -          \       */
+            0x0304003f 0x03060007 0x0308000c 0x030b002b
+            /* R_CTRL  A          D          F       */
+            0x04000061 0x0401001e 0x04020020 0x04030021
+            /* S       K          J          ;       */
+            0x0404001f 0x04050025 0x04060024 0x04080027
+            /* L       ENTER      Z          C       */
+            0x04090026 0x040b001c 0x0501002c 0x0502002e
+            /* V       X          ,          M       */
+            0x0503002f 0x0504002d 0x05050033 0x05060032
+            /* L_SHIFT /          .          SPACE   */
+            0x0507002a 0x05080035 0x05090034 0x050B0039
+            /* 1       3          4          2       */
+            0x06010002 0x06020004 0x06030005 0x06040003
+            /* 8       7          0          9       */
+            0x06050009 0x06060008 0x0608000b 0x0609000a
+            /* L_ALT   DOWN       RIGHT      Q       */
+            0x060a0038 0x060b006c 0x060c006a 0x07010010
+            /* E       R          W          I       */
+            0x07020012 0x07030013 0x07040011 0x07050017
+            /* U       R_SHIFT    P          O       */
+            0x07060016 0x07070036 0x07080019 0x07090018
+            /* UP      LEFT    */
+            0x070b0067 0x070c0069>;
+    };

Documentation/devicetree/bindings/input/touchscreen/zinitix.txt

+Device tree bindings for Zinitx BT541 touchscreen controller
+
+Required properties:
+
+ - compatible		: Should be "zinitix,bt541"
+ - reg			: I2C address of the chip. Should be 0x20
+ - interrupts		: Interrupt to which the chip is connected
+
+Optional properties:
+
+ - vdd-supply		: Analog power supply regulator on VCCA pin
+ - vddo-supply		: Digital power supply regulator on VDD pin
+ - zinitix,mode		: Mode of reporting touch points. Some modes may not work
+			  with a particular ts firmware for unknown reasons. Available
+			  modes are 1 and 2. Mode 2 is the default and preferred.
+
+The touchscreen-* properties are documented in touchscreen.txt in this
+directory.
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		bt541@20 {
+			compatible = "zinitix,bt541";
+			reg = <0x20>;
+			interrupt-parent = <&msmgpio>;
+			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&tsp_default>;
+			vdd-supply = <&reg_vdd_tsp>;
+			vddo-supply = <&pm8916_l6>;
+			touchscreen-size-x = <540>;
+			touchscreen-size-y = <960>;
+			zinitix,mode = <2>;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml

@@ -29,10 +29,13 @@ properties:
       - items:
           - const: allwinner,sun8i-a83t-r-intc
           - const: allwinner,sun6i-a31-r-intc
-      - const: allwinner,sun9i-a80-sc-nmi
+      - const: allwinner,sun9i-a80-nmi
       - items:
           - const: allwinner,sun50i-a64-r-intc
           - const: allwinner,sun6i-a31-r-intc
+      - items:
+          - const: allwinner,sun50i-a100-nmi
+          - const: allwinner,sun9i-a80-nmi
       - items:
           - const: allwinner,sun50i-h6-r-intc
           - const: allwinner,sun6i-a31-r-intc

Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml

@@ -94,12 +94,12 @@ properties:
               instances.
 
 required:
- - compatible
- - reg
- - interrupts
- - interrupt-names
- - interrupt-controller
- - "#interrupt-cells"
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - interrupt-controller
+  - "#interrupt-cells"
 
 additionalProperties: false
 

Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml

@@ -79,6 +79,8 @@ required:
   - ti,sci-dev-id
   - ti,interrupt-ranges
 
+unevaluatedProperties: false
+
 examples:
   - |
     bus {

Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml

@@ -88,6 +88,8 @@ required:
   - ti,sci-dev-id
   - ti,interrupt-ranges
 
+unevaluatedProperties: false
+
 examples:
   - |
     main_gpio_intr: interrupt-controller0 {

Documentation/devicetree/bindings/leds/backlight/common.yaml

@@ -32,3 +32,5 @@ properties:
       that a LED can be made so bright that it gets damaged or causes damage
       due to restrictions in a specific system, such as mounting conditions.
     $ref: /schemas/types.yaml#definitions/uint32
+
+additionalProperties: true