Commit 1c41494a authored by Ming Yang's avatar Ming Yang Committed by Greg Kroah-Hartman

Staging: fbtft: fixed unsigned type warnings

Replace unsigned by unsigned int in fbtft driver.  Issue found by
checkpatch.
Signed-off-by: default avatarMing Yang <minos.future@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 175f5a41
......@@ -29,7 +29,7 @@
#define DEFAULT_GAMMA "07 07 6 0 0 0 5 5 4 0\n" \
"07 08 4 7 5 1 2 0 7 7"
static unsigned read_devicecode(struct fbtft_par *par)
static unsigned int read_devicecode(struct fbtft_par *par)
{
int ret;
u8 rxbuf[8] = {0, };
......@@ -41,7 +41,7 @@ static unsigned read_devicecode(struct fbtft_par *par)
static int init_display(struct fbtft_par *par)
{
unsigned devcode;
unsigned int devcode;
par->fbtftops.reset(par);
......
......@@ -32,26 +32,26 @@
#define DEFAULT_GAMMA "0F 00 7 2 0 0 6 5 4 1\n" \
"04 16 2 7 6 3 2 1 7 7"
static unsigned bt = 6; /* VGL=Vci*4 , VGH=Vci*4 */
static unsigned int bt = 6; /* VGL=Vci*4 , VGH=Vci*4 */
module_param(bt, uint, 0);
MODULE_PARM_DESC(bt, "Sets the factor used in the step-up circuits");
static unsigned vc = 0x03; /* Vci1=Vci*0.80 */
static unsigned int vc = 0x03; /* Vci1=Vci*0.80 */
module_param(vc, uint, 0);
MODULE_PARM_DESC(vc,
"Sets the ratio factor of Vci to generate the reference voltages Vci1");
static unsigned vrh = 0x0d; /* VREG1OUT=Vci*1.85 */
static unsigned int vrh = 0x0d; /* VREG1OUT=Vci*1.85 */
module_param(vrh, uint, 0);
MODULE_PARM_DESC(vrh,
"Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT");
static unsigned vdv = 0x12; /* VCOMH amplitude=VREG1OUT*0.98 */
static unsigned int vdv = 0x12; /* VCOMH amplitude=VREG1OUT*0.98 */
module_param(vdv, uint, 0);
MODULE_PARM_DESC(vdv,
"Select the factor of VREG1OUT to set the amplitude of Vcom");
static unsigned vcm = 0x0a; /* VCOMH=VREG1OUT*0.735 */
static unsigned int vcm = 0x0a; /* VCOMH=VREG1OUT*0.735 */
module_param(vcm, uint, 0);
MODULE_PARM_DESC(vcm, "Set the internal VcomH voltage");
......
......@@ -32,11 +32,11 @@
#define TXBUFLEN (84 * 6)
#define DEFAULT_GAMMA "40" /* gamma controls the contrast in this driver */
static unsigned tc;
static unsigned int tc;
module_param(tc, uint, 0);
MODULE_PARM_DESC(tc, "TC[1:0] Temperature coefficient: 0-3 (default: 0)");
static unsigned bs = 4;
static unsigned int bs = 4;
module_param(bs, uint, 0);
MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)");
......
......@@ -29,7 +29,7 @@
#define DEFAULT_GAMMA "02 03 2 5 7 7 4 2 4 2\n" \
"02 03 2 5 7 5 4 2 4 2"
static unsigned reg11 = 0x6040;
static unsigned int reg11 = 0x6040;
module_param(reg11, uint, 0);
MODULE_PARM_DESC(reg11, "Register 11h value");
......
......@@ -66,7 +66,7 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
static int set_var(struct fbtft_par *par)
{
unsigned remap;
unsigned int remap;
if (par->fbtftops.init_display != init_display) {
/* don't risk messing up register A0h */
......
......@@ -35,7 +35,7 @@
/* gamma is used to control contrast in this driver */
#define DEFAULT_GAMMA "40"
static unsigned bs = 4;
static unsigned int bs = 4;
module_param(bs, uint, 0);
MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)");
......
......@@ -41,30 +41,30 @@
*/
/* BR -> actual ratio: 0-3 -> 5, 10, 11, 13 */
static unsigned ratio = 2;
static unsigned int ratio = 2;
module_param(ratio, uint, 0);
MODULE_PARM_DESC(ratio, "BR[1:0] Bias voltage ratio: 0-3 (default: 2)");
static unsigned gain = 3;
static unsigned int gain = 3;
module_param(gain, uint, 0);
MODULE_PARM_DESC(gain, "GN[1:0] Bias voltage gain: 0-3 (default: 3)");
static unsigned pot = 16;
static unsigned int pot = 16;
module_param(pot, uint, 0);
MODULE_PARM_DESC(pot, "PM[6:0] Bias voltage pot.: 0-63 (default: 16)");
/* TC -> % compensation per deg C: 0-3 -> -.05, -.10, -.015, -.20 */
static unsigned temp;
static unsigned int temp;
module_param(temp, uint, 0);
MODULE_PARM_DESC(temp, "TC[1:0] Temperature compensation: 0-3 (default: 0)");
/* PC[1:0] -> LCD capacitance: 0-3 -> <20nF, 20-28 nF, 29-40 nF, 40-56 nF */
static unsigned load = 1;
static unsigned int load = 1;
module_param(load, uint, 0);
MODULE_PARM_DESC(load, "PC[1:0] Panel Loading: 0-3 (default: 1)");
/* PC[3:2] -> V_LCD: 0, 1, 3 -> ext., int. with ratio = 5, int. standard */
static unsigned pump = 3;
static unsigned int pump = 3;
module_param(pump, uint, 0);
MODULE_PARM_DESC(pump, "PC[3:2] Pump control: 0,1,3 (default: 3)");
......
......@@ -67,7 +67,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
{
unsigned start_line, end_line;
unsigned int start_line, end_line;
u16 *vmem16 = (u16 *)(par->info->screen_buffer + offset);
u16 *pos = par->txbuf.buf + 1;
u16 *buf16 = par->txbuf.buf + 10;
......@@ -104,7 +104,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
static int write_vmem_8bit(struct fbtft_par *par, size_t offset, size_t len)
{
unsigned start_line, end_line;
unsigned int start_line, end_line;
u16 *vmem16 = (u16 *)(par->info->screen_buffer + offset);
u16 *pos = par->txbuf.buf + 1;
u8 *buf8 = par->txbuf.buf + 10;
......@@ -137,7 +137,7 @@ static int write_vmem_8bit(struct fbtft_par *par, size_t offset, size_t len)
return 0;
}
static unsigned firmware_version(struct fbtft_par *par)
static unsigned int firmware_version(struct fbtft_par *par)
{
u8 rxbuf[4] = {0, };
......@@ -152,7 +152,7 @@ static unsigned firmware_version(struct fbtft_par *par)
static int init_display(struct fbtft_par *par)
{
int ret;
unsigned version;
unsigned int version;
u8 save_mode;
/* enable SPI interface by having CS and MOSI low during reset */
......
......@@ -341,8 +341,8 @@ static void fbtft_reset(struct fbtft_par *par)
mdelay(120);
}
static void fbtft_update_display(struct fbtft_par *par, unsigned start_line,
unsigned end_line)
static void fbtft_update_display(struct fbtft_par *par, unsigned int start_line,
unsigned int end_line)
{
size_t offset, len;
ktime_t ts_start, ts_end;
......@@ -435,10 +435,10 @@ static void fbtft_mkdirty(struct fb_info *info, int y, int height)
static void fbtft_deferred_io(struct fb_info *info, struct list_head *pagelist)
{
struct fbtft_par *par = info->par;
unsigned dirty_lines_start, dirty_lines_end;
unsigned int dirty_lines_start, dirty_lines_end;
struct page *page;
unsigned long index;
unsigned y_low = 0, y_high = 0;
unsigned int y_low = 0, y_high = 0;
int count = 0;
spin_lock(&par->dirty_lock);
......@@ -526,18 +526,18 @@ static ssize_t fbtft_fb_write(struct fb_info *info, const char __user *buf,
}
/* from pxafb.c */
static unsigned int chan_to_field(unsigned chan, struct fb_bitfield *bf)
static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf)
{
chan &= 0xffff;
chan >>= 16 - bf->length;
return chan << bf->offset;
}
static int fbtft_fb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
static int fbtft_fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
unsigned int blue, unsigned int transp,
struct fb_info *info)
{
unsigned val;
unsigned int val;
int ret = 1;
dev_dbg(info->dev,
......@@ -654,11 +654,11 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
u8 *vmem = NULL;
void *txbuf = NULL;
void *buf = NULL;
unsigned width;
unsigned height;
unsigned int width;
unsigned int height;
int txbuflen = display->txbuflen;
unsigned bpp = display->bpp;
unsigned fps = display->fps;
unsigned int bpp = display->bpp;
unsigned int fps = display->fps;
int vmem_size, i;
int *init_sequence = display->init_sequence;
char *gamma = display->gamma;
......
......@@ -38,7 +38,7 @@
*/
struct fbtft_gpio {
char name[FBTFT_GPIO_NAME_SIZE];
unsigned gpio;
unsigned int gpio;
};
struct fbtft_par;
......@@ -79,7 +79,7 @@ struct fbtft_ops {
void (*reset)(struct fbtft_par *par);
void (*mkdirty)(struct fb_info *info, int from, int to);
void (*update_display)(struct fbtft_par *par,
unsigned start_line, unsigned end_line);
unsigned int start_line, unsigned int end_line);
int (*init_display)(struct fbtft_par *par);
int (*blank)(struct fbtft_par *par, bool on);
......@@ -115,14 +115,14 @@ struct fbtft_ops {
* This structure is not stored by FBTFT except for init_sequence.
*/
struct fbtft_display {
unsigned width;
unsigned height;
unsigned regwidth;
unsigned buswidth;
unsigned backlight;
unsigned int width;
unsigned int height;
unsigned int regwidth;
unsigned int buswidth;
unsigned int backlight;
struct fbtft_ops fbtftops;
unsigned bpp;
unsigned fps;
unsigned int bpp;
unsigned int fps;
int txbuflen;
int *init_sequence;
char *gamma;
......@@ -146,9 +146,9 @@ struct fbtft_display {
struct fbtft_platform_data {
struct fbtft_display display;
const struct fbtft_gpio *gpios;
unsigned rotate;
unsigned int rotate;
bool bgr;
unsigned fps;
unsigned int fps;
int txbuflen;
u8 startbyte;
char *gamma;
......@@ -216,8 +216,8 @@ struct fbtft_par {
u8 startbyte;
struct fbtft_ops fbtftops;
spinlock_t dirty_lock;
unsigned dirty_lines_start;
unsigned dirty_lines_end;
unsigned int dirty_lines_start;
unsigned int dirty_lines_end;
struct {
int reset;
int dc;
......
......@@ -32,20 +32,20 @@ static char *name;
module_param(name, charp, 0);
MODULE_PARM_DESC(name, "Devicename (required). name=list => list all supported devices.");
static unsigned rotate;
static unsigned int rotate;
module_param(rotate, uint, 0);
MODULE_PARM_DESC(rotate,
"Angle to rotate display counter clockwise: 0, 90, 180, 270");
static unsigned busnum;
static unsigned int busnum;
module_param(busnum, uint, 0);
MODULE_PARM_DESC(busnum, "SPI bus number (default=0)");
static unsigned cs;
static unsigned int cs;
module_param(cs, uint, 0);
MODULE_PARM_DESC(cs, "SPI chip select (default=0)");
static unsigned speed;
static unsigned int speed;
module_param(speed, uint, 0);
MODULE_PARM_DESC(speed, "SPI speed (override device default)");
......@@ -58,7 +58,7 @@ module_param(gpios, charp, 0);
MODULE_PARM_DESC(gpios,
"List of gpios. Comma separated with the form: reset:23,dc:24 (when overriding the default, all gpios must be specified)");
static unsigned fps;
static unsigned int fps;
module_param(fps, uint, 0);
MODULE_PARM_DESC(fps, "Frames per second (override driver default)");
......@@ -76,7 +76,7 @@ module_param(bgr, int, 0);
MODULE_PARM_DESC(bgr,
"BGR bit (supported by some drivers).");
static unsigned startbyte;
static unsigned int startbyte;
module_param(startbyte, uint, 0);
MODULE_PARM_DESC(startbyte, "Sets the Start byte used by some SPI displays.");
......@@ -84,15 +84,15 @@ static bool custom;
module_param(custom, bool, 0);
MODULE_PARM_DESC(custom, "Add a custom display device. Use speed= argument to make it a SPI device, else platform_device");
static unsigned width;
static unsigned int width;
module_param(width, uint, 0);
MODULE_PARM_DESC(width, "Display width, used with the custom argument");
static unsigned height;
static unsigned int height;
module_param(height, uint, 0);
MODULE_PARM_DESC(height, "Display height, used with the custom argument");
static unsigned buswidth = 8;
static unsigned int buswidth = 8;
module_param(buswidth, uint, 0);
MODULE_PARM_DESC(buswidth, "Display bus width, used with the custom argument");
......@@ -106,7 +106,7 @@ module_param(debug, ulong, 0);
MODULE_PARM_DESC(debug,
"level: 0-7 (the remaining 29 bits is for advanced usage)");
static unsigned verbose = 3;
static unsigned int verbose = 3;
module_param(verbose, uint, 0);
MODULE_PARM_DESC(verbose,
"0 silent, >0 show gpios, >1 show devices, >2 show devices before (default=3)");
......@@ -1346,7 +1346,7 @@ static void pr_p_devices(void)
}
#ifdef MODULE
static void fbtft_device_spi_delete(struct spi_master *master, unsigned cs)
static void fbtft_device_spi_delete(struct spi_master *master, unsigned int cs)
{
struct device *dev;
char str[32];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment