Merge tag 'imx-soc-4.9' of...

Merge tag 'imx-soc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Pull "i.MX SoC updates for 4.9" from Shawn Guo:

 - Set INT_MEM_CLK_LPM bit to get proper WAIT mode support on i.MX6SX.
   This is a workaround for i.MX6SX WAIT mode hardware issue.
 - Enable cpuidle support with 3 low-power states (WFI, WAIT, POWER-OFF)
   for i.MX6UL.

* tag 'imx-soc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: build cpuidle-imx6sx.o for imx6ul
  ARM: imx: add cpuidle support for i.mx6ul
  ARM: imx: enable WAIT mode hardware workaround for imx6sx
  ARM: imx: rename imx6q_set_int_mem_clk_lpm() function

arch/arm/mach-imx/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
+obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o
 endif
 
 ifdef CONFIG_SND_IMX_SOC

arch/arm/mach-imx/common.h

@@ -109,7 +109,7 @@ void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
 int imx6_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_int_mem_clk_lpm(bool enable);
+void imx6_set_int_mem_clk_lpm(bool enable);
 void imx6sl_set_wait_clk(bool enter);
 int imx_mmdc_get_ddr_type(void);
 

arch/arm/mach-imx/cpuidle-imx6q.c

@@ -85,7 +85,7 @@ EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused);
 int __init imx6q_cpuidle_init(void)
 {
 	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
-	imx6q_set_int_mem_clk_lpm(true);
+	imx6_set_int_mem_clk_lpm(true);
 
 	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }

arch/arm/mach-imx/cpuidle-imx6sx.c

@@ -9,6 +9,7 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/module.h>
+#include <asm/cacheflush.h>
 #include <asm/cpuidle.h>
 #include <asm/suspend.h>
 
@@ -17,6 +18,15 @@
 
 static int imx6sx_idle_finish(unsigned long val)
 {
+	/*
+	 * for Cortex-A7 which has an internal L2
+	 * cache, need to flush it before powering
+	 * down ARM platform, since flushing L1 cache
+	 * here again has very small overhead, compared
+	 * to adding conditional code for L2 cache type,
+	 * just call flush_cache_all() is fine.
+	 */
+	flush_cache_all();
 	cpu_do_idle();
 
 	return 0;
@@ -90,6 +100,7 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = {
 
 int __init imx6sx_cpuidle_init(void)
 {
+	imx6_set_int_mem_clk_lpm(true);
 	imx6_enable_rbc(false);
 	/*
 	 * set ARM power up/down timing to the fastest,

arch/arm/mach-imx/mach-imx6ul.c

@@ -16,6 +16,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "cpuidle.h"
 
 static void __init imx6ul_enet_clk_init(void)
 {
@@ -79,6 +80,8 @@ static void __init imx6ul_init_irq(void)
 
 static void __init imx6ul_init_late(void)
 {
+	imx6sx_cpuidle_init();
+
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
 		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
 }

arch/arm/mach-imx/pm-imx6.c

@@ -217,7 +217,7 @@ struct imx6_cpu_pm_info {
 	u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
 } __aligned(8);
 
-void imx6q_set_int_mem_clk_lpm(bool enable)
+void imx6_set_int_mem_clk_lpm(bool enable)
 {
 	u32 val = readl_relaxed(ccm_base + CGPR);
 
@@ -367,7 +367,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 	switch (state) {
 	case PM_SUSPEND_STANDBY:
 		imx6_set_lpm(STOP_POWER_ON);
-		imx6q_set_int_mem_clk_lpm(true);
+		imx6_set_int_mem_clk_lpm(true);
 		imx_gpc_pre_suspend(false);
 		if (cpu_is_imx6sl())
 			imx6sl_set_wait_clk(true);
@@ -380,7 +380,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		break;
 	case PM_SUSPEND_MEM:
 		imx6_set_lpm(STOP_POWER_OFF);
-		imx6q_set_int_mem_clk_lpm(false);
+		imx6_set_int_mem_clk_lpm(false);
 		imx6q_enable_wb(true);
 		/*
 		 * For suspend into ocram, asm code already take care of
@@ -398,7 +398,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		imx_gpc_post_resume();
 		imx6_enable_rbc(false);
 		imx6q_enable_wb(false);
-		imx6q_set_int_mem_clk_lpm(true);
+		imx6_set_int_mem_clk_lpm(true);
 		imx6_set_lpm(WAIT_CLOCKED);
 		break;
 	default: