Commit 1cc2d0e0 authored by Vasily Khoruzhick's avatar Vasily Khoruzhick Committed by Marcel Holtmann

dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth

Add binding document for bluetooth part of RTL8723BS/RTL8723CS
Signed-off-by: default avatarVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: default avatarAlistair Francis <alistair@alistair23.me>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 37aee136
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: RTL8723BS/RTL8723CS/RTL8822CS Bluetooth Device Tree Bindings
maintainers:
- Vasily Khoruzhick <anarsoul@gmail.com>
- Alistair Francis <alistair@alistair23.me>
description:
RTL8723CS/RTL8723CS/RTL8822CS is WiFi + BT chip. WiFi part is connected over
SDIO, while BT is connected over serial. It speaks H5 protocol with few
extra commands to upload firmware and change module speed.
properties:
compatible:
oneOf:
- const: "realtek,rtl8723bs-bt"
- const: "realtek,rtl8723cs-bt"
- const: "realtek,rtl8822cs-bt"
device-wake-gpios:
maxItems: 1
description: GPIO specifier, used to wakeup the BT module
enable-gpios:
maxItems: 1
description: GPIO specifier, used to enable the BT module
host-wake-gpios:
maxItems: 1
description: GPIO specifier, used to wakeup the host processor
required:
- compatible
examples:
- |
#include <dt-bindings/gpio/gpio.h>
uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
uart-has-rtscts = <1>;
bluetooth {
compatible = "realtek,rtl8723bs-bt";
device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment