ARM: S5PV210: Add power consumers for hsotg for GONI board

This patch adds definitions for power consumers for s3c-hsotg driver
on Goni board. The consumers are defined as arrays, because later more
entries for MIPI and ADC will be defined.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s5pv210/mach-goni.c

@@ -271,10 +271,18 @@ static void __init goni_tsp_init(void)
 /* MAX8998 regulators */
 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
 
+static struct regulator_consumer_supply goni_ldo3_consumers[] = {
+	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
+};
+
 static struct regulator_consumer_supply goni_ldo5_consumers[] = {
 	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
 };
 
+static struct regulator_consumer_supply goni_ldo8_consumers[] = {
+	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
+};
+
 static struct regulator_consumer_supply goni_ldo11_consumers[] = {
 	REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */
 };
@@ -306,7 +314,10 @@ static struct regulator_init_data goni_ldo3_data = {
 		.min_uV		= 1100000,
 		.max_uV		= 1100000,
 		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(goni_ldo3_consumers),
+	.consumer_supplies = goni_ldo3_consumers,
 };
 
 static struct regulator_init_data goni_ldo4_data = {
@@ -355,7 +366,10 @@ static struct regulator_init_data goni_ldo8_data = {
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(goni_ldo8_consumers),
+	.consumer_supplies = goni_ldo8_consumers,
 };
 
 static struct regulator_init_data goni_ldo9_data = {